Product ITEM is unavailable. See products from the same category below.
Circular Saw Blades
Circular saw blades are used with circular saws, mitre and chop saws, table saws, and concrete and masonry saws. They have teeth that cut through material and grooves to help limit vibration and disperse heat caused by friction that can cause overheating and damage the blade. Blades are designed for use with a specific material, such as wood or metal. Generally, larger blades are used for industrial applications and smaller blades are used in circular saws and other handheld tools.
This combination circular saw blade is 10 inches in diameter with a 0.071 inch thickness and a speed of 6000 RPM. It has a carbide tip and a ⅝ inch round arbour. The blade with 60 teeth has a 15 Degrees hook angle and a high alternate top bevel tooth grind. It cuts up to 0.098 inch width and four inches depth.
This combination circular saw blade is 10 inches in diameter with a 0.071 inch thickness and a speed of 6000 RPM. It has a carbide tip and a ⅝ inch round arbour. The blade with 60 teeth has a 15 Degrees hook angle and a high alternate top bevel tooth grind. It cuts up to 0.098 inch width and four inches depth.
This circular saw blade is 10 inches in diameter with 0.087 inch thickness and a speed of 7000 RPM. It has a TiCo carbide tip and a ⅝-inch arbour. The blade with 60 teeth has a 10 Degrees hook angle and an ATB tooth grind. It is suitable for cutting crosscut wood, hardwoods, softwoods, laminate, and plywood.
This circular saw blade is 10 inches in diameter with 0.087 inch thickness and a speed of 7000 RPM. It has a TiCo carbide tip and a ⅝-inch arbour. The blade with 60 teeth has a 10 Degrees hook angle and an ATB tooth grind. It is suitable for cutting crosscut wood, hardwoods, softwoods, laminate, and plywood.
This circular saw blade has a 7¼-inch diameter with a 0.04 inch thickness and a speed of 8000 RPM. It has a TiCo carbide tip and a ⅝ inch round arbour. The blade with 40 teeth has a diamond knockout, a 15 Degrees hook angle, and an alternate top bevel tooth grind. It is suitable for plywood/wood and cuts up to 0.059 inch width and 2 ⅜ inches depth.
This circular saw blade has a 7¼-inch diameter with a 0.04 inch thickness and a speed of 8000 RPM. It has a TiCo carbide tip and a ⅝ inch round arbour. The blade with 40 teeth has a diamond knockout, a 15 Degrees hook angle, and an alternate top bevel tooth grind. It is suitable for plywood/wood and cuts up to 0.059 inch width and 2 ⅜ inches depth.
This panel sizing blade has a 17¾ inches diameter with a 3.5 millimetre thickness. It has a TiCo carbide tip and a 60 millimetre arbour. The blade with 72 teeth has a 10 Degrees hook angle and a TCG tooth grind. It is suitable for laminate, melamine, plywood, double-sided veneers, MDF, OSB, chipboard, particle-board, and fibre board.
This panel sizing blade has a 17¾ inches diameter with a 3.5 millimetre thickness. It has a TiCo carbide tip and a 60 millimetre arbour. The blade with 72 teeth has a 10 Degrees hook angle and a TCG tooth grind. It is suitable for laminate, melamine, plywood, double-sided veneers, MDF, OSB, chipboard, particle-board, and fibre board.
This canonical circular scoring saw blade has a 200 millimetre diameter with a four millimetre thickness. It has a carbide tip and a 45 millimetre arbour. The blade with 36 teeth has an 8 Degrees hook angle. It is suitable for wood, laminate, melamine, plywood, double-sided veneers, MDF, OSB, chipboard, particle-board, and fibre board.
This canonical circular scoring saw blade has a 200 millimetre diameter with a four millimetre thickness. It has a carbide tip and a 45 millimetre arbour. The blade with 36 teeth has an 8 Degrees hook angle. It is suitable for wood, laminate, melamine, plywood, double-sided veneers, MDF, OSB, chipboard, particle-board, and fibre board.
This circular saw blade is 10 inches in diameter with a 0.087 inch thickness. It has a TiCo carbide tip and a ⅝-inch arbour. The coated two-sided laminate blade with 80 teeth has a -3 Degrees hook angle and a TCG tooth grind. It is suitable for wood, double-sided laminate, melamine, and plywood and cuts up to 0.126 inch width and¼ to 1⅝ inches depth.
This circular saw blade is 10 inches in diameter with a 0.087 inch thickness. It has a TiCo carbide tip and a ⅝-inch arbour. The coated two-sided laminate blade with 80 teeth has a -3 Degrees hook angle and a TCG tooth grind. It is suitable for wood, double-sided laminate, melamine, and plywood and cuts up to 0.126 inch width and¼ to 1⅝ inches depth.
This HardieBlade combination circular saw blade has a 7¼-inch diameter with a 0.04 inch thickness and a speed of 10000 RPM. It has a carbide tip and a ⅝ inch round arbour. The blade with 24 teeth has a diamond knockout, a 15 Degrees hook angle, and an alternate top bevel tooth grind. It cuts up to 0.059 inch width and 2 ⅜ inches depth.
This HardieBlade combination circular saw blade has a 7¼-inch diameter with a 0.04 inch thickness and a speed of 10000 RPM. It has a carbide tip and a ⅝ inch round arbour. The blade with 24 teeth has a diamond knockout, a 15 Degrees hook angle, and an alternate top bevel tooth grind. It cuts up to 0.059 inch width and 2 ⅜ inches depth.
This panel sizing blade has a 420 millimetre diameter with a 3.5 millimetre thickness. It has a TiCo carbide tip and a 60 millimetre arbour. The blade with 84 teeth has a 10 Degrees hook angle and a TCG tooth grind. It is suitable for laminate, melamine, plywood, double-sided veneers, MDF, OSB, chipboard, particle-board, and fibre board.
This panel sizing blade has a 420 millimetre diameter with a 3.5 millimetre thickness. It has a TiCo carbide tip and a 60 millimetre arbour. The blade with 84 teeth has a 10 Degrees hook angle and a TCG tooth grind. It is suitable for laminate, melamine, plywood, double-sided veneers, MDF, OSB, chipboard, particle-board, and fibre board.
This circular saw blade has a 16 inches diameter with 0.118 inch thickness. It has a TiCo carbide tip and a one inch arbour. The blade with 96 teeth has a 10 Degrees hook angle and a TCG tooth grind. It is suitable for cutting rip wood, crosscut wood, hardwoods, laminate, plywood, and chipboard. The blade cuts up to 0.177 inch width and 2¾ inch depth.
This circular saw blade has a 16 inches diameter with 0.118 inch thickness. It has a TiCo carbide tip and a one inch arbour. The blade with 96 teeth has a 10 Degrees hook angle and a TCG tooth grind. It is suitable for cutting rip wood, crosscut wood, hardwoods, laminate, plywood, and chipboard. The blade cuts up to 0.177 inch width and 2¾ inch depth.
This circular saw blade is 10 inches in diameter with a 0.098 inch thickness. It has a TiCo carbide tip and a ⅝-inch arbour. The blade with 30 teeth has a 12 Degrees hook angle and a TCG tooth grind. It is suitable for ripping hardwood, softwood, and plywood. The blade cuts up to 0.118 inch width and ⅛ to 1 inch depth.
This circular saw blade is 10 inches in diameter with a 0.098 inch thickness. It has a TiCo carbide tip and a ⅝-inch arbour. The blade with 30 teeth has a 12 Degrees hook angle and a TCG tooth grind. It is suitable for ripping hardwood, softwood, and plywood. The blade cuts up to 0.118 inch width and ⅛ to 1 inch depth.
This finishing circular saw blade has a 7¼-inch diameter with a 0.04 inch thickness. It has a TiCo carbide tip. The blade with 40 teeth has a diamond knockout, a 15 Degrees hook angle, and an alternate top bevel tooth grind. It is suitable for wood, plywood, stock, decking, fencing, and wet lumber.
This finishing circular saw blade has a 7¼-inch diameter with a 0.04 inch thickness. It has a TiCo carbide tip. The blade with 40 teeth has a diamond knockout, a 15 Degrees hook angle, and an alternate top bevel tooth grind. It is suitable for wood, plywood, stock, decking, fencing, and wet lumber.
This circular scoring saw blade has a four-inch diameter. It has a TiCo carbide tip and a 4/5 inch arbour. The blade with 12 teeth has an 11 Degrees hook angle and an alternate top bevel tooth grind. It is suitable for wood, laminate, melamine, veneered plywood, plywood, MDF, OSB, chipboard, particle-board, and fibre board.
This circular scoring saw blade has a four-inch diameter. It has a TiCo carbide tip and a 4/5 inch arbour. The blade with 12 teeth has an 11 Degrees hook angle and an alternate top bevel tooth grind. It is suitable for wood, laminate, melamine, veneered plywood, plywood, MDF, OSB, chipboard, particle-board, and fibre board.
This panel sizing blade has a 600 millimetre diameter with a four millimetre thickness. It has a TiCo carbide tip and a 60 millimetre arbour. The blade with 72 teeth has a 15 Degrees hook angle and a TCG tooth grind. It is suitable for laminate, melamine, plywood, double-sided veneers, MDF, OSB, chipboard, particle-board, and fibre board.
This panel sizing blade has a 600 millimetre diameter with a four millimetre thickness. It has a TiCo carbide tip and a 60 millimetre arbour. The blade with 72 teeth has a 15 Degrees hook angle and a TCG tooth grind. It is suitable for laminate, melamine, plywood, double-sided veneers, MDF, OSB, chipboard, particle-board, and fibre board.
This circular saw blade is 14 inches in diameter with 0.118 inch thickness. It has a TiCo carbide tip and a one inch arbour. The blade with 70 teeth has a 10 Degrees hook angle and a COMB tooth grind. It is suitable for cutting rip wood, crosscut wood, hardwoods, laminate, plywood, and chipboard. The blade cuts up to 0.157 inch width and 3½ inch depth.
This circular saw blade is 14 inches in diameter with 0.118 inch thickness. It has a TiCo carbide tip and a one inch arbour. The blade with 70 teeth has a 10 Degrees hook angle and a COMB tooth grind. It is suitable for cutting rip wood, crosscut wood, hardwoods, laminate, plywood, and chipboard. The blade cuts up to 0.157 inch width and 3½ inch depth.
This circular scoring saw blade has a 4¼ inches diameter with a 3.6 millimetre thickness. It has a TiCo carbide tip and a two-inch arbour. The blade with 12 teeth has a 11 Degrees hook angle and an ATB tooth grind. It is suitable for wood, laminate, melamine, plywood, MDF, OSB, chipboard, particle-board, and fibre board.
This circular scoring saw blade has a 4¼ inches diameter with a 3.6 millimetre thickness. It has a TiCo carbide tip and a two-inch arbour. The blade with 12 teeth has a 11 Degrees hook angle and an ATB tooth grind. It is suitable for wood, laminate, melamine, plywood, MDF, OSB, chipboard, particle-board, and fibre board.
This circular saw blade has a 12-inch diameter with a 0.071 inch thickness and a speed of 5000 RPM. It has a carbide tip and a one inch round arbour. The blade with 96 teeth has a -5 Degrees hook angle and a TCG tooth grind. It is suitable for mitre saws, radial arm saws, and table saws. The blade cuts up to 0.091 inch width and four inches depth.
This circular saw blade has a 12-inch diameter with a 0.071 inch thickness and a speed of 5000 RPM. It has a carbide tip and a one inch round arbour. The blade with 96 teeth has a -5 Degrees hook angle and a TCG tooth grind. It is suitable for mitre saws, radial arm saws, and table saws. The blade cuts up to 0.091 inch width and four inches depth.
To view Availability for another location, please enter postal code below
Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order.
