Forets courts en acier rapide sans canal de refroidissement

Ce foret court est en acier rapide et a un diamètre de 3/16 po/une tige de 1 po de long. Peut être utilisé avec l'ABS, l'acrylique, l'aluminium, le laiton, les matériaux composites, le cuivre, l'érable, le MDF, le nylon, le chêne, le pin, le polycarbonate, le PVC, l'acier. Ce foret a un fini oxyde noir. Il est sans canal de refroidissement et a une longueur de 3 1/2 po. De plus, il a des cannelures droites de 2 1/2 po.

Ce foret court est en acier rapide et a un diamètre de 3/16 po/une tige de 1 po de long. Peut être utilisé avec l'ABS, l'acrylique, l'aluminium, le laiton, les matériaux composites, le cuivre, l'érable, le MDF, le nylon, le chêne, le pin, le polycarbonate, le PVC, l'acier. Ce foret a un fini oxyde noir. Il est sans canal de refroidissement et a une longueur de 3 1/2 po. De plus, il a des cannelures droites de 2 1/2 po.

Ce foret court est en acier rapide et a un diamètre de 9/64 po/une tige de 1 po de long. Peut être utilisé avec l'ABS, l'acrylique, l'aluminium, le laiton, les matériaux composites, le cuivre, l'érable, le MDF, le nylon, le chêne, le pin, le polycarbonate, le PVC, l'acier. Ce foret a un fini oxyde noir. Il est sans canal de refroidissement et mesure 2 7/8 po de long. De plus, il a des cannelures droites de 1 7/8 po.

Ce foret court est en acier rapide et a un diamètre de 9/64 po/une tige de 1 po de long. Peut être utilisé avec l'ABS, l'acrylique, l'aluminium, le laiton, les matériaux composites, le cuivre, l'érable, le MDF, le nylon, le chêne, le pin, le polycarbonate, le PVC, l'acier. Ce foret a un fini oxyde noir. Il est sans canal de refroidissement et mesure 2 7/8 po de long. De plus, il a des cannelures droites de 1 7/8 po.

This jobber length drill bit is made of high speed steel and has a 21/64 inch diameter, one-inch long shank. It is for use with abs, acrylic, aluminum, brass, composite materials, copper, maple, mdf, nylon, oak, pine, polycarbonate, pvc, steel. This jobber length drill bit has a black oxide finish. It is non-coolant through with a 4⅝ inch length. Plus it has 3⅝ inch straight flutes, and a 135 Degrees drill point.

This jobber length drill bit is made of high speed steel and has a 21/64 inch diameter, one-inch long shank. It is for use with abs, acrylic, aluminum, brass, composite materials, copper, maple, mdf, nylon, oak, pine, polycarbonate, pvc, steel. This jobber length drill bit has a black oxide finish. It is non-coolant through with a 4⅝ inch length. Plus it has 3⅝ inch straight flutes, and a 135 Degrees drill point.

This jobber length drill bit is made of high speed steel and has a ⅜ inch diameter, one-inch long shank. It is for use with abs, acrylic, aluminum, brass, composite materials, copper, maple, mdf, nylon, oak, pine, polycarbonate, pvc, steel. This jobber length drill bit has a black oxide finish. It is non-coolant through with a five-inch length. Plus it has 4 inch straight flutes, and a 135 Degrees drill point.

This jobber length drill bit is made of high speed steel and has a ⅜ inch diameter, one-inch long shank. It is for use with abs, acrylic, aluminum, brass, composite materials, copper, maple, mdf, nylon, oak, pine, polycarbonate, pvc, steel. This jobber length drill bit has a black oxide finish. It is non-coolant through with a five-inch length. Plus it has 4 inch straight flutes, and a 135 Degrees drill point.

This jobber length drill bit has a 1/16 inch diameter shank. This jobber length drill bit has fractional inch measurements. It is non-coolant through with a 1⅞ inch length. Plus it has ⅞ inch straight flutes, a right hand cutting direction, and a 118 Degrees drill point.

This jobber length drill bit has a 1/16 inch diameter shank. This jobber length drill bit has fractional inch measurements. It is non-coolant through with a 1⅞ inch length. Plus it has ⅞ inch straight flutes, a right hand cutting direction, and a 118 Degrees drill point.

This jobber length drill bit is made of high speed steel and has a 13/64 inch diameter, one-inch long shank. It is for use with aluminum, brass, bronze, composite, copper, steel, wood. This jobber length drill bit has a black oxide finish, and has fractional inch measurements. It is non-coolant through with a 3¾ inch length. Plus it has two 2¾ inch spiral flutes, a straight shank, and a 135 Degrees split point.

This jobber length drill bit is made of high speed steel and has a 13/64 inch diameter, one-inch long shank. It is for use with aluminum, brass, bronze, composite, copper, steel, wood. This jobber length drill bit has a black oxide finish, and has fractional inch measurements. It is non-coolant through with a 3¾ inch length. Plus it has two 2¾ inch spiral flutes, a straight shank, and a 135 Degrees split point.

This jobber length drill bit is made of high speed steel and has a ¼ inch diameter, one-inch long shank. It is for use with abs, acrylic, aluminum, brass, composite materials, copper, maple, mdf, nylon, oak, pine, polycarbonate, pvc, steel. This jobber length drill bit has a black oxide finish. It is non-coolant through with a four-inch length. Plus it has 3 inch straight flutes, and a 135 Degrees drill point.

This jobber length drill bit is made of high speed steel and has a ¼ inch diameter, one-inch long shank. It is for use with abs, acrylic, aluminum, brass, composite materials, copper, maple, mdf, nylon, oak, pine, polycarbonate, pvc, steel. This jobber length drill bit has a black oxide finish. It is non-coolant through with a four-inch length. Plus it has 3 inch straight flutes, and a 135 Degrees drill point.

This jobber length drill bit has a ⅜ inch diameter shank. This jobber length drill bit has fractional inch measurements. It is non-coolant through with a 5⅝ inch length. Plus it has 4⅝ inch straight flutes, 3 flats shank, a right hand cutting direction, and a 135 Degrees drill point.

This jobber length drill bit has a ⅜ inch diameter shank. This jobber length drill bit has fractional inch measurements. It is non-coolant through with a 5⅝ inch length. Plus it has 4⅝ inch straight flutes, 3 flats shank, a right hand cutting direction, and a 135 Degrees drill point.

This jobber length drill bit has a ½ inch diameter shank. This jobber length drill bit has fractional inch measurements. It is non-coolant through with a six-inch length. Plus it has 5 inch straight flutes, 3 flats shank, a right hand cutting direction, and a 135 Degrees drill point.

This jobber length drill bit has a ½ inch diameter shank. This jobber length drill bit has fractional inch measurements. It is non-coolant through with a six-inch length. Plus it has 5 inch straight flutes, 3 flats shank, a right hand cutting direction, and a 135 Degrees drill point.

This jobber length drill bit is made of high speed steel and has a 5/16 inch diameter, one-inch long shank. It is for use with aluminum, brass, bronze, composite, copper, steel, wood. This jobber length drill bit has a black oxide finish, and has fractional inch measurements. It is non-coolant through with a 4½ inch length. Plus it has two 3½ inch spiral flutes, a straight shank, and a 135 Degrees split point.

This jobber length drill bit is made of high speed steel and has a 5/16 inch diameter, one-inch long shank. It is for use with aluminum, brass, bronze, composite, copper, steel, wood. This jobber length drill bit has a black oxide finish, and has fractional inch measurements. It is non-coolant through with a 4½ inch length. Plus it has two 3½ inch spiral flutes, a straight shank, and a 135 Degrees split point.

This jobber length drill bit is made of high speed steel and has a 5/64 inch diameter, one-inch long shank. It is for use with abs, acrylic, aluminum, brass, composite materials, copper, maple, mdf, nylon, oak, pine, polycarbonate, pvc, steel. This jobber length drill bit has a black oxide finish. It is non-coolant through with a two-inch length. Plus it has 1 inch straight flutes, and a 118 Degrees drill point.

This jobber length drill bit is made of high speed steel and has a 5/64 inch diameter, one-inch long shank. It is for use with abs, acrylic, aluminum, brass, composite materials, copper, maple, mdf, nylon, oak, pine, polycarbonate, pvc, steel. This jobber length drill bit has a black oxide finish. It is non-coolant through with a two-inch length. Plus it has 1 inch straight flutes, and a 118 Degrees drill point.

This jobber length drill bit is made of high speed steel and has a 7.64 inch diameter, one-inch long shank. It is for use with abs, acrylic, aluminum, brass, composite materials, copper, maple, mdf, nylon, oak, pine, polycarbonate, pvc, steel. This jobber length drill bit has a black oxide finish. It is non-coolant through with a 2⅝ inch length. Plus it has 1⅝ inch straight flutes, and a 118 Degrees drill point.

This jobber length drill bit is made of high speed steel and has a 7.64 inch diameter, one-inch long shank. It is for use with abs, acrylic, aluminum, brass, composite materials, copper, maple, mdf, nylon, oak, pine, polycarbonate, pvc, steel. This jobber length drill bit has a black oxide finish. It is non-coolant through with a 2⅝ inch length. Plus it has 1⅝ inch straight flutes, and a 118 Degrees drill point.

This jobber length drill bit has a 5/32 inch diameter shank. This jobber length drill bit has fractional inch measurements. It is non-coolant through with a 3⅛ inch length. Plus it has 2⅛ inch straight flutes, a right hand cutting direction, and a 135 Degrees drill point.

This jobber length drill bit has a 5/32 inch diameter shank. This jobber length drill bit has fractional inch measurements. It is non-coolant through with a 3⅛ inch length. Plus it has 2⅛ inch straight flutes, a right hand cutting direction, and a 135 Degrees drill point.

This jobber length drill bit is made of high speed steel and has a 9/32 inch diameter, one-inch long shank. It is for use with abs, acrylic, aluminum, brass, composite materials, copper, maple, mdf, nylon, oak, pine, polycarbonate, pvc, steel. This jobber length drill bit has a black oxide finish. It is non-coolant through with a 4¼ inch length. Plus it has 3¼ inch straight flutes, and a 135 Degrees drill point.

This jobber length drill bit is made of high speed steel and has a 9/32 inch diameter, one-inch long shank. It is for use with abs, acrylic, aluminum, brass, composite materials, copper, maple, mdf, nylon, oak, pine, polycarbonate, pvc, steel. This jobber length drill bit has a black oxide finish. It is non-coolant through with a 4¼ inch length. Plus it has 3¼ inch straight flutes, and a 135 Degrees drill point.

This jobber length drill bit is made of high speed steel and has a ⅜ inch diameter, one-inch long shank. It is for use with abs, acrylic, aluminum, brass, composite materials, copper, maple, mdf, nylon, oak, pine, polycarbonate, pvc, steel. This jobber length drill bit has a black oxide finish. It is non-coolant through with a 5½ inch length. Plus it has 4½ inch straight flutes, and a 135 Degrees drill point.

This jobber length drill bit is made of high speed steel and has a ⅜ inch diameter, one-inch long shank. It is for use with abs, acrylic, aluminum, brass, composite materials, copper, maple, mdf, nylon, oak, pine, polycarbonate, pvc, steel. This jobber length drill bit has a black oxide finish. It is non-coolant through with a 5½ inch length. Plus it has 4½ inch straight flutes, and a 135 Degrees drill point.

This jobber length drill bit has a ⅜ inch diameter shank. This jobber length drill bit has fractional inch measurements. It is non-coolant through with a 5⅜ inch length. Plus it has 4⅜ inch straight flutes, 3 flats shank, a right hand cutting direction, and a 135 Degrees drill point.

This jobber length drill bit has a ⅜ inch diameter shank. This jobber length drill bit has fractional inch measurements. It is non-coolant through with a 5⅜ inch length. Plus it has 4⅜ inch straight flutes, 3 flats shank, a right hand cutting direction, and a 135 Degrees drill point.