Instant Adhesives

This 401 instant adhesive is clear and comes in a 0.1 fluid ounce tube. It meets the standards for 29 CFR 1910.1200, CFIA. This instant adhesive features excellent adhesion to most substrates, low viscosity, solvent free. In addition, it has a working time of 5 seconds and has a tensile strength of 1,900 psi. It is not water-resistant.

This 401 instant adhesive is clear and comes in a 0.1 fluid ounce tube. It meets the standards for 29 CFR 1910.1200, CFIA. This instant adhesive features excellent adhesion to most substrates, low viscosity, solvent free. In addition, it has a working time of 5 seconds and has a tensile strength of 1,900 psi. It is not water-resistant.

Instant adhesives, also known as superglues, bond and cure the fastest among all adhesives. They are one-part adhesives that need minimal clamping time. Some adhesives require primers to prepare materials before bonding.

Instant adhesives, also known as superglues, bond and cure the fastest among all adhesives. They are one-part adhesives that need minimal clamping time. Some adhesives require primers to prepare materials before bonding.

This 454 instant adhesive is clear and comes in a 300 gram container. This instant adhesive features fast fixture, high tensile strength, and high viscosity.

This 454 instant adhesive is clear and comes in a 300 gram container. This instant adhesive features fast fixture, high tensile strength, and high viscosity.

This 454 instant adhesive is clear and comes in a one fluid ounce syringe. It meets the standards for 29 CFR 1910.1200, A-A-3097, CFIA. This instant adhesive features non-wicking, specially suited to porous materials. In addition, it has a working time of 15 seconds. It is not water-resistant.

This 454 instant adhesive is clear and comes in a one fluid ounce syringe. It meets the standards for 29 CFR 1910.1200, A-A-3097, CFIA. This instant adhesive features non-wicking, specially suited to porous materials. In addition, it has a working time of 15 seconds. It is not water-resistant.

This 380 instant adhesive is black and comes in a one fluid ounce bottle. It meets the standards for 29 CFR 1910.1200, CFIA. This instant adhesive features designed for close fitting parts, low viscosity, rubber toughened. In addition, it has a working time of 90 seconds and has a tensile strength of 2,700 psi. It is not water-resistant.

This 380 instant adhesive is black and comes in a one fluid ounce bottle. It meets the standards for 29 CFR 1910.1200, CFIA. This instant adhesive features designed for close fitting parts, low viscosity, rubber toughened. In addition, it has a working time of 90 seconds and has a tensile strength of 2,700 psi. It is not water-resistant.

Instant adhesives, also known as superglues, bond and cure the fastest among all adhesives. They are one-part adhesives that need minimal clamping time. Some adhesives require primers to prepare materials before bonding.

Instant adhesives, also known as superglues, bond and cure the fastest among all adhesives. They are one-part adhesives that need minimal clamping time. Some adhesives require primers to prepare materials before bonding.

With a 60-second cure time, this adhesive is made with liquid silicone. Light yellow/clear in colour, the adhesive is packaged in a 35-millilitre syringe for controlled application.

With a 60-second cure time, this adhesive is made with liquid silicone. Light yellow/clear in colour, the adhesive is packaged in a 35-millilitre syringe for controlled application.

This Loctite epoxy adhesive is blue and comes in a hobbock. It meets the standards for ASTM D695. This epoxy adhesive features allows for fast return to service, eliminates the formation of gaps between backing and liners or support structures, eliminates the need for traditional melting or special equipment, has high hydroly and includes resin and hardener. In addition, it is for use with metal.

This Loctite epoxy adhesive is blue and comes in a hobbock. It meets the standards for ASTM D695. This epoxy adhesive features allows for fast return to service, eliminates the formation of gaps between backing and liners or support structures, eliminates the need for traditional melting or special equipment, has high hydroly and includes resin and hardener. In addition, it is for use with metal.

This sensor-safe, high temperature, room temperature vulcanizing gasket maker resists ageing, weathering, and thermal cycling without hardening, shrinking, or cracking. The red, thixotropic, silicone paste can withstand a temperature range of -59 to 313 Degrees C and has a flashpoint of greater than 93 Degrees C. The non-corrosive sealant begins to harden in 30 minutes and fully cures in 24 hours This non-corrosive product comes in a 300-millilitre cartridge.

This sensor-safe, high temperature, room temperature vulcanizing gasket maker resists ageing, weathering, and thermal cycling without hardening, shrinking, or cracking. The red, thixotropic, silicone paste can withstand a temperature range of -59 to 313 Degrees C and has a flashpoint of greater than 93 Degrees C. The non-corrosive sealant begins to harden in 30 minutes and fully cures in 24 hours This non-corrosive product comes in a 300-millilitre cartridge.

This 403 instant adhesive is clear and comes in a 0.7 fluid ounce bottle. It meets the standards for 29 CFR 1910.1200. This instant adhesive features low bloom, medium viscosity. In addition, it has a working time of 20 seconds and has a tensile strength of 4,340 psi. It is not water-resistant.

This 403 instant adhesive is clear and comes in a 0.7 fluid ounce bottle. It meets the standards for 29 CFR 1910.1200. This instant adhesive features low bloom, medium viscosity. In addition, it has a working time of 20 seconds and has a tensile strength of 4,340 psi. It is not water-resistant.

This 409 instant adhesive is clear and comes in a 0.7 fluid ounce tube. It meets the standards for 29 CFR 1910.1200. This instant adhesive features general purpose gel ideal for metal and rubber, solvent free. In addition, it has a working time of 75 seconds and has a tensile strength of 1,740 to 3,625 psi. It is not water-resistant.

This 409 instant adhesive is clear and comes in a 0.7 fluid ounce tube. It meets the standards for 29 CFR 1910.1200. This instant adhesive features general purpose gel ideal for metal and rubber, solvent free. In addition, it has a working time of 75 seconds and has a tensile strength of 1,740 to 3,625 psi. It is not water-resistant.

This 4204 instant adhesive is clear and comes in a 0.7 fluid ounce tube. It meets the standards for 29 CFR 1910.1200. This instant adhesive features thermal additive. In addition, it has a working time of 30 seconds and has a tensile strength of 2400 psi. It is not water-resistant.

This 4204 instant adhesive is clear and comes in a 0.7 fluid ounce tube. It meets the standards for 29 CFR 1910.1200. This instant adhesive features thermal additive. In addition, it has a working time of 30 seconds and has a tensile strength of 2400 psi. It is not water-resistant.

This 460 instant adhesive is clear and comes in a 0.7 fluid ounce bottle. It meets the standards for 29 CFR 1910.1200. This instant adhesive features low bloom, low viscosity. In addition, it has a working time of 15 seconds and has a tensile strength of 4,330 psi. It is not water-resistant.

This 460 instant adhesive is clear and comes in a 0.7 fluid ounce bottle. It meets the standards for 29 CFR 1910.1200. This instant adhesive features low bloom, low viscosity. In addition, it has a working time of 15 seconds and has a tensile strength of 4,330 psi. It is not water-resistant.

This 495 instant adhesive is clear and comes in a one fluid ounce bottle. It meets the standards for 29 CFR 1910.1200, A-A-3097. This instant adhesive features low viscosity. In addition, it has a working time of 5 seconds and has a tensile strength of 1,990 psi. It is not water-resistant.

This 495 instant adhesive is clear and comes in a one fluid ounce bottle. It meets the standards for 29 CFR 1910.1200, A-A-3097. This instant adhesive features low viscosity. In addition, it has a working time of 5 seconds and has a tensile strength of 1,990 psi. It is not water-resistant.

This 420 instant adhesive is clear and comes in a one pound bottle. This instant adhesive features cures very quickly when confined between two surfaces, fixture time of 20 to 40 seconds, high viscosity, ideal for bonding small to medium-size parts and is solvent-free.

This 420 instant adhesive is clear and comes in a one pound bottle. This instant adhesive features cures very quickly when confined between two surfaces, fixture time of 20 to 40 seconds, high viscosity, ideal for bonding small to medium-size parts and is solvent-free.

This 411 instant adhesive is clear and comes in a 0.7 fluid ounce bottle. It meets the standards for 29 CFR 1910.1200. This instant adhesive features excellent added heat resistance, excellent peel strength, gap filling, high viscosity. In addition, it has a working time of 30 seconds and has a tensile strength of 1,740 to 3,625 psi. It is not water-resistant.

This 411 instant adhesive is clear and comes in a 0.7 fluid ounce bottle. It meets the standards for 29 CFR 1910.1200. This instant adhesive features excellent added heat resistance, excellent peel strength, gap filling, high viscosity. In addition, it has a working time of 30 seconds and has a tensile strength of 1,740 to 3,625 psi. It is not water-resistant.