!
Mise à niveau du navigateur recommandée: Améliorez votre expérience Grainger.ca en mettant à niveau votre navigateur vers Edge ou Chrome. En savoir plus sur nos navigateurs pris en charge.
Retour en haut

Filtrer les résultats par

Filtres appliqués
Tout effacer

Magasiner Par
Marque
Prix
Taille de foret
Équivalent décimal
Longueur de goujure
Taille de la queue conique
Longueur hors tout
Résultats suggérés pour "SUGGEST-ITEM"
Le produit ITEM n’est pas disponible. Voir les produits de la même catégorie ci-dessous.

Forets à queue conique

Les forets à queue conique sont directement insérés dans la broche, le manchon d’entraînement ou la douille d’une machine telle qu’une perceuse à colonne ou un tour. Cela permet de gagner du temps lors de l’installation et du remplacement des forets sur la machine par rapport à d’autres types de forets. Les forets à queue conique sont autobloquants, ce qui signifie que la friction entre les forets et le porte-outil maintient les forets en place, même dans les applications à couple élevé. Ces forets ne doivent pas être utilisés dans une pince de serrage ou un mandrin.

https://catalogue.grainger.ca/?hybris=true

10 Résultats trouvés

Résultats par page :  16 | 32 | 48
  • WESTWARD
  • FORET À TIGE CONIQUE, FORET 1 5/32 PO, CANNELURE 2⅛ PO LONG, TIGE CONIQUE NO 4
  • N° article WSW5TVH0
  • N° de modèle du manufacturier 5TVH0
  • Droit de manutention écologique: Droit de manutention écologique :
  • This general purpose taper shank drill bit is made of high speed steel. This taper shank drill bit has a black oxide finish, and has fractional inch measurements. It is non-coolant through with a 12⅞ inch length. Plus it has two 2⅛ inch spiral flutes, taper shank, a right hand cutting direction, and 118 Degrees conventional point drill point.

    Voir plus Voir moins

    Document FDS introuvable

    Pour une assistance supplémentaire veuillez communiquer avec le coordinateur FDS par courriel à productcompliance@grainger.ca

    PAGE DU CATALOGUE # N/A
  • WESTWARD
  • TAPER SHANK DRILL BIT, ¾ IN DRILL BIT SIZE, 5⅞ IN FLUTE L, 18MM TAPER SHANK
  • N° article WSW5TVF8
  • N° de modèle du manufacturier 5TVF8
  • Droit de manutention écologique: Droit de manutention écologique :
  • This general purpose taper shank drill bit is made of high speed steel. This taper shank drill bit has a black oxide finish, and has fractional inch measurements. It is non-coolant through with a 9 ¾ inch length. Plus it has two 5⅞ inch spiral flutes, taper shank, a right hand cutting direction, and 118 Degrees conventional point drill point.

    Voir plus Voir moins

    Document FDS introuvable

    Pour une assistance supplémentaire veuillez communiquer avec le coordinateur FDS par courriel à productcompliance@grainger.ca

    PAGE DU CATALOGUE # N/A
  • WESTWARD
  • TAPER SHANK DRILL BIT, 23/32 IN DRILL BIT SIZE, 5⅝ IN FLUTE L, MT2 TAPER SHANK
  • N° article WSW5TVF7
  • N° de modèle du manufacturier 5TVF7
  • Droit de manutention écologique: Droit de manutention écologique :
  • This general purpose taper shank drill bit is made of high speed steel. This taper shank drill bit has a black oxide finish, and has fractional inch measurements. It is non-coolant through with a 9½ inch length. Plus it has one 5⅝ inch spiral flutes, taper shank, a right hand cutting direction, and 118 Degrees conventional point drill point.

    Voir plus Voir moins

    Document FDS introuvable

    Pour une assistance supplémentaire veuillez communiquer avec le coordinateur FDS par courriel à productcompliance@grainger.ca

    PAGE DU CATALOGUE # N/A
  • WESTWARD
  • TAPER SHANK DRILL BIT, 1-3/16 IN DRILL BIT SIZE, 7⅜ IN FLUTE L, #4 TAPER SHANK
  • N° article WSW5TVH1
  • N° de modèle du manufacturier 5TVH1
  • Droit de manutention écologique: Droit de manutention écologique :
  • This general purpose taper shank drill bit is made of high speed steel. This taper shank drill bit has a black oxide finish, and has fractional inch measurements. It is non-coolant through with a 13 inch length. Plus it has two 7⅜ inch spiral flutes, taper shank, a right hand cutting direction, and 118 Degrees conventional point drill point.

    Voir plus Voir moins

    Document FDS introuvable

    Pour une assistance supplémentaire veuillez communiquer avec le coordinateur FDS par courriel à productcompliance@grainger.ca

    PAGE DU CATALOGUE # N/A
  • WESTWARD
  • TAPER SHANK DRILL BIT, 1⅛ IN DRILL BIT SIZE, 7⅛ IN FLUTE L, #4 TAPER SHANK
  • N° article WSW5TVG9
  • N° de modèle du manufacturier 5TVG9
  • Droit de manutention écologique: Droit de manutention écologique :
  • This general purpose taper shank drill bit is made of high speed steel. This taper shank drill bit has a black oxide finish, and has fractional inch measurements. It is non-coolant through with a 12¾ inch length. Plus it has two 7⅛ inch spiral flutes, taper shank, a right hand cutting direction, and 118 Degrees conventional point drill point.

    Voir plus Voir moins

    Document FDS introuvable

    Pour une assistance supplémentaire veuillez communiquer avec le coordinateur FDS par courriel à productcompliance@grainger.ca

    PAGE DU CATALOGUE # N/A
  • WESTWARD
  • TAPER SHANK DRILL BIT, 1½ IN DRILL BIT SIZE, 9⅜ IN FLUTE L, #4 TAPER SHANK
  • N° article WSW5TVH6
  • N° de modèle du manufacturier 5TVH6
  • Droit de manutention écologique: Droit de manutention écologique :
  • This general purpose taper shank drill bit is made of high speed steel. This taper shank drill bit has a black oxide finish, and has fractional inch measurements. It is non-coolant through with a 15 inch length. Plus it has two 9 ⅜ inch spiral flutes, taper shank, a right hand cutting direction, and 118 Degrees conventional point drill point.

    Voir plus Voir moins

    Document FDS introuvable

    Pour une assistance supplémentaire veuillez communiquer avec le coordinateur FDS par courriel à productcompliance@grainger.ca

    PAGE DU CATALOGUE # N/A
  • WESTWARD
  • TAPER SHANK DRILL BIT, 1 5/16 IN DRILL BIT SIZE, 8⅝ IN FLUTE L, #4 TAPER SHANK
  • N° article WSW5TVH3
  • N° de modèle du manufacturier 5TVH3
  • Droit de manutention écologique: Droit de manutention écologique :
  • This general purpose taper shank drill bit is made of high speed steel. This taper shank drill bit has a black oxide finish, and has fractional inch measurements. It is non-coolant through with a 14¼ inch length. Plus it has two 8 ⅝ inch spiral flutes, taper shank, a right hand cutting direction, and 118 Degrees conventional point drill point.

    Voir plus Voir moins

    Document FDS introuvable

    Pour une assistance supplémentaire veuillez communiquer avec le coordinateur FDS par courriel à productcompliance@grainger.ca

    PAGE DU CATALOGUE # N/A
  • WESTWARD
  • TAPER SHANK DRILL BIT, 9/16 IN DRILL BIT SIZE, 4⅞ IN FLUTE L, 18MM TAPER SHANK
  • N° article WSW5TVF2
  • N° de modèle du manufacturier 5TVF2
  • Droit de manutention écologique: Droit de manutention écologique :
  • This general purpose taper shank drill bit is made of high speed steel. This taper shank drill bit has a black oxide finish, and has fractional inch measurements. It is non-coolant through with a 8¾ inch length. Plus it has two 4⅞ inch spiral flutes, taper shank, a right hand cutting direction, and 118 Degrees conventional point drill point.

    Voir plus Voir moins

    Document FDS introuvable

    Pour une assistance supplémentaire veuillez communiquer avec le coordinateur FDS par courriel à productcompliance@grainger.ca

    PAGE DU CATALOGUE # N/A
  • WESTWARD
  • TAPER SHANK DRILL BIT, 1¼ IN DRILL BIT SIZE, 7⅞ IN FLUTE L, #4 TAPER SHANK
  • N° article WSW5TVH2
  • N° de modèle du manufacturier 5TVH2
  • Droit de manutention écologique: Droit de manutention écologique :
  • This general purpose taper shank drill bit is made of high speed steel. This taper shank drill bit has a black oxide finish, and has fractional inch measurements. It is non-coolant through with a 13½ inch length. Plus it has two 7⅞ inch spiral flutes, taper shank, a right hand cutting direction, and 118 Degrees conventional point drill point.

    Voir plus Voir moins

    Document FDS introuvable

    Pour une assistance supplémentaire veuillez communiquer avec le coordinateur FDS par courriel à productcompliance@grainger.ca

    PAGE DU CATALOGUE # N/A
  • WESTWARD
  • TAPER SHANK DRILL BIT, ⅞ IN DRILL BIT SIZE, 6⅛ IN FLUTE L, #3 TAPER SHANK
  • N° article WSW5TVG2
  • N° de modèle du manufacturier 5TVG2
  • Droit de manutention écologique: Droit de manutention écologique :
  • This general purpose taper shank drill bit is made of high speed steel. This taper shank drill bit has a black oxide finish, and has fractional inch measurements. It is non-coolant through with a 10 ¾ inch length. Plus it has two 6⅛ inch spiral flutes, taper shank, a right hand cutting direction, and 118 Degrees conventional point drill point.

    Voir plus Voir moins

    Document FDS introuvable

    Pour une assistance supplémentaire veuillez communiquer avec le coordinateur FDS par courriel à productcompliance@grainger.ca

    PAGE DU CATALOGUE # N/A
Résultats par page :  16 | 32 | 48

Ajouter à la liste de commande

Vos articles ont été ajoutés

Vos articles ont été ajoutés à certaines listes

Quantité maximale dépassée. Cet article n’a pas été ajouté à la liste ou aux listes suivante(s)

Aucune liste existante n’a été trouvée. Veuillez en créer une nouvelle ci-dessous.

Votre liste a été créée

Choisir ma liste de commande