Indexable square-shoulder end mills cut in two directions (laterally and axially) to make 90° angled cuts in shoulder milling operations. Sometimes called 0°/90° mills, they have flutes that carry chips away, and they have seats at the tip of the flutes to hold cutting inserts. They mount to a milling machine and use replaceable, multi-edged cutting inserts that can be rotated (indexed) to expose a fresh cutting edge when the old one dulls. The inserts can be replaced with new ones of the same type or different types without removing the end mill from the machine. Indexable milling tools require fewer tool changes than solid tools in high-volume metalworking and fabrication applications with high speeds, high feeds, and difficult-to-machine materials.
This indexable square shoulder end mill is for use on face milling, pocketing, side/shoulder milling: square end, slotting: square end. This indexable square shoulder end mill features effective internal coolant feature, reaching the cutting edge precisely, strong concept to run up to 15 mm (0.590 inch) depth of cut, superior wall and surface finish capabilities, true 0 Degrees . Plus it has 4.53 inch length, is coolant through, and a right hand cutting direction.
This indexable square shoulder end mill is for use on face milling, pocketing, side/shoulder milling: square end, slotting: square end. This indexable square shoulder end mill features effective internal coolant feature, reaching the cutting edge precisely, strong concept to run up to 15 mm (0.590 inch) depth of cut, superior wall and surface finish capabilities, true 0 Degrees . Plus it has 4.53 inch length, is coolant through, and a right hand cutting direction.
This indexable square shoulder end mill is for use on face milling, helical milling, pocketing, ramping: blank, side/shoulder milling: square end. This indexable square shoulder end mill features effective internal coolant feature, increased ramping capability, precisely reaching the cutting edge, superior wall and surface finish. Plus it has 4½ inch length, is coolant through, and a right hand cutting direction.
This indexable square shoulder end mill is for use on face milling, helical milling, pocketing, ramping: blank, side/shoulder milling: square end. This indexable square shoulder end mill features effective internal coolant feature, increased ramping capability, precisely reaching the cutting edge, superior wall and surface finish. Plus it has 4½ inch length, is coolant through, and a right hand cutting direction.
This indexable square shoulder end mill is for use on face milling, helical milling, pocketing, ramping: blank, side/shoulder milling: square end. This indexable square shoulder end mill features effective internal coolant feature, increased ramping capability, precisely reaching the cutting edge, superior wall and surface finish. Plus it has 4½ inch length, is coolant through, and a right hand cutting direction.
This indexable square shoulder end mill is for use on face milling, helical milling, pocketing, ramping: blank, side/shoulder milling: square end. This indexable square shoulder end mill features effective internal coolant feature, increased ramping capability, precisely reaching the cutting edge, superior wall and surface finish. Plus it has 4½ inch length, is coolant through, and a right hand cutting direction.
This indexable square shoulder end mill is for use on face milling, helical milling, pocketing, ramping: blank, side/shoulder milling: square end. This indexable square shoulder end mill features effective internal coolant feature, increased ramping capability, precisely reaching the cutting edge, superior wall and surface finish. Plus it has four-inch length, is coolant through, and a right hand cutting direction.
This indexable square shoulder end mill is for use on face milling, helical milling, pocketing, ramping: blank, side/shoulder milling: square end. This indexable square shoulder end mill features effective internal coolant feature, increased ramping capability, precisely reaching the cutting edge, superior wall and surface finish. Plus it has four-inch length, is coolant through, and a right hand cutting direction.
This indexable square shoulder end mill is for use on face milling, helical milling, pocketing, ramping: blank, side/shoulder milling: square end. This indexable square shoulder end mill features effective internal coolant feature, increased ramping capability, precisely reaching the cutting edge, superior wall and surface finish. Plus it has a 2¾ inch length, is coolant through, and a right hand cutting direction.
This indexable square shoulder end mill is for use on face milling, helical milling, pocketing, ramping: blank, side/shoulder milling: square end. This indexable square shoulder end mill features effective internal coolant feature, increased ramping capability, precisely reaching the cutting edge, superior wall and surface finish. Plus it has a 2¾ inch length, is coolant through, and a right hand cutting direction.
This indexable face mill is for use on face milling, helical milling, pocketing, ramping:blank, side and face milling, side/shoulder milling: square end. This indexable face mill features effective internal coolant feature, increased ramping capability, precisely reaching the cutting edge, superior wall and surface finish. Plus it has 1.5750 inch length, is coolant through, and a right hand cutting direction.
This indexable face mill is for use on face milling, helical milling, pocketing, ramping:blank, side and face milling, side/shoulder milling: square end. This indexable face mill features effective internal coolant feature, increased ramping capability, precisely reaching the cutting edge, superior wall and surface finish. Plus it has 1.5750 inch length, is coolant through, and a right hand cutting direction.
This indexable face mill is for use on face milling, helical milling, pocketing, ramping:blank, side/shoulder milling: square end, slotting: square end. This indexable face mill features effective internal coolant feature, increased ramping capability, precisely reaching the cutting edge, superior wall and surface finish. Plus it has 1¾ inch length, is coolant through, and a right hand cutting direction.
This indexable face mill is for use on face milling, helical milling, pocketing, ramping:blank, side/shoulder milling: square end, slotting: square end. This indexable face mill features effective internal coolant feature, increased ramping capability, precisely reaching the cutting edge, superior wall and surface finish. Plus it has 1¾ inch length, is coolant through, and a right hand cutting direction.
Indexable square-shoulder end mills cut in two directions (laterally and axially) to make 90 Degrees angled cuts in shoulder milling operations. Sometimes called 0 Degrees /90 Degrees mills, they have flutes that carry chips away, and they have seats at the tip of the flutes to hold cutting inserts.
Indexable square-shoulder end mills cut in two directions (laterally and axially) to make 90 Degrees angled cuts in shoulder milling operations. Sometimes called 0 Degrees /90 Degrees mills, they have flutes that carry chips away, and they have seats at the tip of the flutes to hold cutting inserts.
This indexable square shoulder end mill is for use on face milling, helical milling, pocketing, ramping: blank, side/shoulder milling: square end. This indexable square shoulder end mill features effective internal coolant feature, increased ramping capability, precisely reaching the cutting edge, superior wall and surface finish. Plus it has 3.2000 inch length, is coolant through, and a right hand cutting direction.
This indexable square shoulder end mill is for use on face milling, helical milling, pocketing, ramping: blank, side/shoulder milling: square end. This indexable square shoulder end mill features effective internal coolant feature, increased ramping capability, precisely reaching the cutting edge, superior wall and surface finish. Plus it has 3.2000 inch length, is coolant through, and a right hand cutting direction.
This indexable square shoulder end mill is for use on face milling, helical milling, pocketing, ramping: blank, side/shoulder milling: square end. This indexable square shoulder end mill features effective internal coolant feature, increased ramping capability, precisely reaching the cutting edge, superior wall and surface finish. Plus it has 3¼ inch length, is coolant through, and a right hand cutting direction.
This indexable square shoulder end mill is for use on face milling, helical milling, pocketing, ramping: blank, side/shoulder milling: square end. This indexable square shoulder end mill features effective internal coolant feature, increased ramping capability, precisely reaching the cutting edge, superior wall and surface finish. Plus it has 3¼ inch length, is coolant through, and a right hand cutting direction.
This indexable square shoulder end mill is for use on face milling, helical milling, pocketing, ramping: blank, side/shoulder milling: square end. This indexable square shoulder end mill features effective internal coolant feature, increased ramping capability, precisely reaching the cutting edge, superior wall and surface finish. Plus it has 3½ inch length, is coolant through, and a right hand cutting direction.
This indexable square shoulder end mill is for use on face milling, helical milling, pocketing, ramping: blank, side/shoulder milling: square end. This indexable square shoulder end mill features effective internal coolant feature, increased ramping capability, precisely reaching the cutting edge, superior wall and surface finish. Plus it has 3½ inch length, is coolant through, and a right hand cutting direction.
This indexable square shoulder end mill is for use on face milling, side/shoulder milling: square end. This indexable square shoulder end mill features cutter bodies with internal coolant supply, less bur creation on the workpiece, optimized chip gash design for proper chip evacuation, user-friendly pocket numbering system. Plus it has 4.53 inch length, is coolant through, and a right hand cutting direction.
This indexable square shoulder end mill is for use on face milling, side/shoulder milling: square end. This indexable square shoulder end mill features cutter bodies with internal coolant supply, less bur creation on the workpiece, optimized chip gash design for proper chip evacuation, user-friendly pocket numbering system. Plus it has 4.53 inch length, is coolant through, and a right hand cutting direction.
This indexable square shoulder end mill is for use on face milling, helical milling, pocketing, ramping: blank, side/shoulder milling: square end. This indexable square shoulder end mill features effective internal coolant feature, increased ramping capability, precisely reaching the cutting edge, superior wall and surface finish. Plus it has 4.8000 inch length, is coolant through, and a right hand cutting direction.
This indexable square shoulder end mill is for use on face milling, helical milling, pocketing, ramping: blank, side/shoulder milling: square end. This indexable square shoulder end mill features effective internal coolant feature, increased ramping capability, precisely reaching the cutting edge, superior wall and surface finish. Plus it has 4.8000 inch length, is coolant through, and a right hand cutting direction.
This indexable square shoulder end mill is for use on face milling, helical milling, pocketing, ramping: blank, side/shoulder milling: square end. This indexable square shoulder end mill features effective internal coolant feature, increased ramping capability, precisely reaching the cutting edge, superior wall and surface finish. Plus it has four-inch length, is coolant through, and a right hand cutting direction.
This indexable square shoulder end mill is for use on face milling, helical milling, pocketing, ramping: blank, side/shoulder milling: square end. This indexable square shoulder end mill features effective internal coolant feature, increased ramping capability, precisely reaching the cutting edge, superior wall and surface finish. Plus it has four-inch length, is coolant through, and a right hand cutting direction.
This indexable square shoulder end mill is for use on face milling, helical milling, pocketing, ramping: blank. This indexable square shoulder end mill features consistent axial gauge length with insert nose radii from 0.008 inch to 0.236 inch, productivity booster up to 525 in 3/min mrr at machining aluminum components. Plus it has 5.0300 inch length, is coolant through, and a right hand cutting direction.
This indexable square shoulder end mill is for use on face milling, helical milling, pocketing, ramping: blank. This indexable square shoulder end mill features consistent axial gauge length with insert nose radii from 0.008 inch to 0.236 inch, productivity booster up to 525 in 3/min mrr at machining aluminum components. Plus it has 5.0300 inch length, is coolant through, and a right hand cutting direction.
This indexable face mill is for use on face milling, helical milling, pocketing, ramping:blank, side/shoulder milling: square end, slotting: square end. This indexable face mill features effective internal coolant feature, increased ramping capability, precisely reaching the cutting edge, superior wall and surface finish. Plus it has 1.5750 inch length, is coolant through, and a right hand cutting direction.
This indexable face mill is for use on face milling, helical milling, pocketing, ramping:blank, side/shoulder milling: square end, slotting: square end. This indexable face mill features effective internal coolant feature, increased ramping capability, precisely reaching the cutting edge, superior wall and surface finish. Plus it has 1.5750 inch length, is coolant through, and a right hand cutting direction.
To view Availability for another location, please enter postal code below
Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order.
