Construction Adhesives

This Power Grab construction adhesive is white and comes in a 10.1 fluid ounce cartridge. It meets the standards for APA AFG-01, ASTM C557, ASTM D3498, HUD UM 60a. This construction adhesive features apply to vertical surfaces, fast set time, impact resistant, shock resistant. In addition, it has a working time of 15 minutes and has a tensile strength of 167 psi, and is water-resistant.

This Power Grab construction adhesive is white and comes in a 10.1 fluid ounce cartridge. It meets the standards for APA AFG-01, ASTM C557, ASTM D3498, HUD UM 60a. This construction adhesive features apply to vertical surfaces, fast set time, impact resistant, shock resistant. In addition, it has a working time of 15 minutes and has a tensile strength of 167 psi, and is water-resistant.

This AL 6302 R sealant is white and comes in a five kilogram box. It meets the standards for California Proposition 65, CEPA, TSCA 8(b). This sealant features a structural technology, heat curing, solvent free sealant based on a polyacrylic plastisol.

This AL 6302 R sealant is white and comes in a five kilogram box. It meets the standards for California Proposition 65, CEPA, TSCA 8(b). This sealant features a structural technology, heat curing, solvent free sealant based on a polyacrylic plastisol.

Use this compound as an alternative to welding or brazing cracked or broken metal parts. Once cured in 12 to 16 hours, it can be drilled, sanded, painted or filed. This cold-weld bonding compound withstands temperatures to 49 Degrees C intermittent. With over 3,000 PSI shear strength on steel, this adhesive resists most automotive, shop, and cleaning fluids. This adhesive is 2012 OSHA Hazard Communication Standard (29 CFR 1910.1200)-approved.

Use this compound as an alternative to welding or brazing cracked or broken metal parts. Once cured in 12 to 16 hours, it can be drilled, sanded, painted or filed. This cold-weld bonding compound withstands temperatures to 49 Degrees C intermittent. With over 3,000 PSI shear strength on steel, this adhesive resists most automotive, shop, and cleaning fluids. This adhesive is 2012 OSHA Hazard Communication Standard (29 CFR 1910.1200)-approved.

This construction adhesive is white and comes in a nine ounce cartridge. It meets the standards for ASTM C557. This construction adhesive features easy to gun, easy water clean up, voc compliant. In addition, it has a working time of 15 minutes.

This construction adhesive is white and comes in a nine ounce cartridge. It meets the standards for ASTM C557. This construction adhesive features easy to gun, easy water clean up, voc compliant. In addition, it has a working time of 15 minutes.

This glue comes in a 10.3 ounce cartridge. This glue features contain no filler, high solid concentrate, non-foaming. In addition, it has a working time of 10 minutes.

This glue comes in a 10.3 ounce cartridge. This glue features contain no filler, high solid concentrate, non-foaming. In addition, it has a working time of 10 minutes.

This self-fusing repair tape has a temperature range of -80 Degrees F to 500 Degrees F. It replaces the need for both duct and electrical tape. Repairs dry or wet, this tape creates an air- and water-tight seal, withstands fuel, salt, water, oil, and acids. The silicone-based tape does not leave a sticky residue. This tape is mil SPEC AA59163- and UL510-approved.

This self-fusing repair tape has a temperature range of -80 Degrees F to 500 Degrees F. It replaces the need for both duct and electrical tape. Repairs dry or wet, this tape creates an air- and water-tight seal, withstands fuel, salt, water, oil, and acids. The silicone-based tape does not leave a sticky residue. This tape is mil SPEC AA59163- and UL510-approved.

This muffler and tailpipe bandage measures 2 x 42 inches. It begins to harden in one to three minutes. This epoxy-impregnated fibreglass bandage chemically welds mufflers and tailpipes and permanently repairs holes and leaks in minutes.

This muffler and tailpipe bandage measures 2 x 42 inches. It begins to harden in one to three minutes. This epoxy-impregnated fibreglass bandage chemically welds mufflers and tailpipes and permanently repairs holes and leaks in minutes.

Construction adhesives hold building materials together and prevent separation after drying. They provide a substitute when mechanical fasteners are not suitable, or provide additional support when used with fasteners. These adhesives make permanent bonds but they should not be used for load-bearing applications like structural adhesives.

Construction adhesives hold building materials together and prevent separation after drying. They provide a substitute when mechanical fasteners are not suitable, or provide additional support when used with fasteners. These adhesives make permanent bonds but they should not be used for load-bearing applications like structural adhesives.

Construction adhesives hold building materials together and prevent separation after drying. They provide a substitute when mechanical fasteners are not suitable, or provide additional support when used with fasteners. These adhesives make permanent bonds but they should not be used for load-bearing applications like structural adhesives.

Construction adhesives hold building materials together and prevent separation after drying. They provide a substitute when mechanical fasteners are not suitable, or provide additional support when used with fasteners. These adhesives make permanent bonds but they should not be used for load-bearing applications like structural adhesives.

This troubleshooter liquid finish remover comes in a aerosol can. It meets the standards for CEPA, RA 6969, TSCA. Construction adhesives hold building materials together and prevent separation after drying. They provide a substitute when mechanical fasteners are not suitable, or provide additional support when used with fasteners.

This troubleshooter liquid finish remover comes in a aerosol can. It meets the standards for CEPA, RA 6969, TSCA. Construction adhesives hold building materials together and prevent separation after drying. They provide a substitute when mechanical fasteners are not suitable, or provide additional support when used with fasteners.

This construction adhesive is tan and comes in a 10.3 ounce cartridge. It meets the standards for APA AFG-01, ASTM D3498, PFS Certified. This construction adhesive features bonds wet, easy to gun in cold temperatures, frozen and treated lumber, high strength weatherproof bond. In addition, it has a working time of 15 minutes.

This construction adhesive is tan and comes in a 10.3 ounce cartridge. It meets the standards for APA AFG-01, ASTM D3498, PFS Certified. This construction adhesive features bonds wet, easy to gun in cold temperatures, frozen and treated lumber, high strength weatherproof bond. In addition, it has a working time of 15 minutes.

This sealer is black in colour and is waterproof. Construction adhesives hold building materials together and prevent separation after drying. They provide a substitute when mechanical fasteners are not suitable, or provide additional support when used with fasteners.

This sealer is black in colour and is waterproof. Construction adhesives hold building materials together and prevent separation after drying. They provide a substitute when mechanical fasteners are not suitable, or provide additional support when used with fasteners.

This construction adhesive is tan and comes in a 28 ounce cartridge. It meets the standards for APA AFG-01, ASTM D3498, PFS Certified. This construction adhesive features bonds wet, easy to gun in cold temperatures, frozen and treated lumber, high strength weatherproof bond. In addition, it has a working time of 15 minutes.

This construction adhesive is tan and comes in a 28 ounce cartridge. It meets the standards for APA AFG-01, ASTM D3498, PFS Certified. This construction adhesive features bonds wet, easy to gun in cold temperatures, frozen and treated lumber, high strength weatherproof bond. In addition, it has a working time of 15 minutes.

This AA 349 structural adhesive is clear and comes in a 50 mL bottle. It meets the standards for California Proposition 65, CEPA DSL/NDSL, CERCLA/SARA, OSHA, TSCA. This structural adhesive features medium viscosity, no mix. In addition, it has a tensile strength of 1600 psi.

This AA 349 structural adhesive is clear and comes in a 50 mL bottle. It meets the standards for California Proposition 65, CEPA DSL/NDSL, CERCLA/SARA, OSHA, TSCA. This structural adhesive features medium viscosity, no mix. In addition, it has a tensile strength of 1600 psi.

This muffler cement repairs holes and cracks and seals joints in new exhaust systems. It begins to harden in five minutes and fully cures in 30 minutes. The standards met are 2012 OSHA Hazard Communication Standard (29 CFR 1910.1200).

This muffler cement repairs holes and cracks and seals joints in new exhaust systems. It begins to harden in five minutes and fully cures in 30 minutes. The standards met are 2012 OSHA Hazard Communication Standard (29 CFR 1910.1200).

This 408 instant adhesive is clear and comes in a 20 gram bottle. This instant adhesive features capillary action, h and s labelling-free, low bloom, suited for plastics and polyolefin in combination with primer Loctite 770 or Loctite 7239, well suited for porous and acidic surfaces. In addition, it has a tensile strength of 3,950 psi.

This 408 instant adhesive is clear and comes in a 20 gram bottle. This instant adhesive features capillary action, h and s labelling-free, low bloom, suited for plastics and polyolefin in combination with primer Loctite 770 or Loctite 7239, well suited for porous and acidic surfaces. In addition, it has a tensile strength of 3,950 psi.