Circular Saw Blades

This circular saw blade has a 7¼-inch diameter. It has 8300 maximum RPM, carbide teeth, five Degrees hook angle, and a ⅝-inch arbour. The blade has 60 teeth and a triple chip grind tooth. It is suitable for cutting non-ferrous metal and aluminum of 0.076 inch width.

This circular saw blade has a 7¼-inch diameter. It has 8300 maximum RPM, carbide teeth, five Degrees hook angle, and a ⅝-inch arbour. The blade has 60 teeth and a triple chip grind tooth. It is suitable for cutting non-ferrous metal and aluminum of 0.076 inch width.

This circular saw blade has a 12-inch diameter, 0.094 inch kerf thickness, and a 0.079 inch plate thickness. It has 2000 maximum revolutions per minute, a carbide tip, zero Degrees hook angle, and a one inch arbour. The crosscutting blade has 60 teeth and a triple chip grind tooth. It is suitable for cutting ferrous metal, tubing, and angle iron.

This circular saw blade has a 12-inch diameter, 0.094 inch kerf thickness, and a 0.079 inch plate thickness. It has 2000 maximum revolutions per minute, a carbide tip, zero Degrees hook angle, and a one inch arbour. The crosscutting blade has 60 teeth and a triple chip grind tooth. It is suitable for cutting ferrous metal, tubing, and angle iron.

This metal-cutting circular saw blade has a 7¼-inch diameter and 0.059 inch plate thickness. It has 5800 maximum RPM, a cermet tip, zero Degrees hook angle, and a ⅝-inch arbour. The blade has 36 teeth and an alternate top bevel tooth grind. It is suitable for cutting sheets, metal studs, angle iron, rebar, pipe, tubing, and other ferrous metals.

This metal-cutting circular saw blade has a 7¼-inch diameter and 0.059 inch plate thickness. It has 5800 maximum RPM, a cermet tip, zero Degrees hook angle, and a ⅝-inch arbour. The blade has 36 teeth and an alternate top bevel tooth grind. It is suitable for cutting sheets, metal studs, angle iron, rebar, pipe, tubing, and other ferrous metals.

This metal-cutting circular saw blade has a 7¼-inch diameter and 0.063 inch plate thickness. It has 5800 RPM, a carbide tip, zero Degrees hook angle, and a ⅝-inch arbour. The blade has 48 teeth and a triple chip grind tooth. It is suitable for cutting sheets, corrugated, metal studs, angle iron, rebar, pipe, tubing, and other ferrous metals.

This metal-cutting circular saw blade has a 7¼-inch diameter and 0.063 inch plate thickness. It has 5800 RPM, a carbide tip, zero Degrees hook angle, and a ⅝-inch arbour. The blade has 48 teeth and a triple chip grind tooth. It is suitable for cutting sheets, corrugated, metal studs, angle iron, rebar, pipe, tubing, and other ferrous metals.

This circular saw blade has a 5⅜ inches diameter and 0.043 inch plate thickness. It has 4500 maximum revolutions per minute, a carbide tip, zero Degrees hook angle, and a ⅝-inch arbour. The crosscutting blade has 30 teeth and a triple chip tooth grind. It is suitable for use in ferrous metal, conduit pipe, and angle iron of two inch depth.

This circular saw blade has a 5⅜ inches diameter and 0.043 inch plate thickness. It has 4500 maximum revolutions per minute, a carbide tip, zero Degrees hook angle, and a ⅝-inch arbour. The crosscutting blade has 30 teeth and a triple chip tooth grind. It is suitable for use in ferrous metal, conduit pipe, and angle iron of two inch depth.

This circular saw blade is made of carbide and has a 6½-inch diameter with a 0.059 inch plate thickness. It has 20 Degrees hook angle and a ⅝-inch arbour. The combination blade has 24 teeth and an alternate top bevel tooth grind. It is suitable for ripping, crosscutting, mitre cuts, and framing fast ripping. There are two blades in a pack.

This circular saw blade is made of carbide and has a 6½-inch diameter with a 0.059 inch plate thickness. It has 20 Degrees hook angle and a ⅝-inch arbour. The combination blade has 24 teeth and an alternate top bevel tooth grind. It is suitable for ripping, crosscutting, mitre cuts, and framing fast ripping. There are two blades in a pack.

This circular saw blade has a 10¼ inches diameter, 0.091 ultra thin kerf thickness, and 0.063 inch plate thickness. It has 5870 RPM, a carbide tip, a 20 Degrees hook angle, and a ⅝ inch round arbour. The cross/rip cutting blade has 24 teeth, and an alternate top bevel tooth grind. It is suitable for use in cutting wood and framing.

This circular saw blade has a 10¼ inches diameter, 0.091 ultra thin kerf thickness, and 0.063 inch plate thickness. It has 5870 RPM, a carbide tip, a 20 Degrees hook angle, and a ⅝ inch round arbour. The cross/rip cutting blade has 24 teeth, and an alternate top bevel tooth grind. It is suitable for use in cutting wood and framing.

This circular saw blade is made of carbide and has an 8¼ inches diameter with a 0.051 inch plate thickness. It has 5700 maximum revolutions per minute, 0.078 inch kerf thickness, 20 Degrees hook angle, and a ⅝-inch arbour. The rip/plunge/cross cutting blade has 24 teeth and an alternate top bevel tooth grind. It is suitable for wood and framing.

This circular saw blade is made of carbide and has an 8¼ inches diameter with a 0.051 inch plate thickness. It has 5700 maximum revolutions per minute, 0.078 inch kerf thickness, 20 Degrees hook angle, and a ⅝-inch arbour. The rip/plunge/cross cutting blade has 24 teeth and an alternate top bevel tooth grind. It is suitable for wood and framing.

This circular saw blade has 7½ inches diameter and 0.055 inch plate thickness. It has 40 teeth and a maximum cutting-edge of 6¼ inches depth. The general-purpose blade has 8040 maximum revolutions per minute, a carbide tip, a ATAF tooth grind, 10 Degrees s hook angle, and a ⅝ inch round arbour. It is for use with XSL01 circular saw.

This circular saw blade has 7½ inches diameter and 0.055 inch plate thickness. It has 40 teeth and a maximum cutting-edge of 6¼ inches depth. The general-purpose blade has 8040 maximum revolutions per minute, a carbide tip, a ATAF tooth grind, 10 Degrees s hook angle, and a ⅝ inch round arbour. It is for use with XSL01 circular saw.

This circular saw blade has 6¼ inches diameter and 0.055 inch plate thickness. It has 56 teeth, 4770 maximum revolutions per minute, a carbide tip, a ATB tooth grind, -15 Degrees s hook angle, and a ⅝ inch round arbour. It is for use with 5046DWDE circular saw.

This circular saw blade has 6¼ inches diameter and 0.055 inch plate thickness. It has 56 teeth, 4770 maximum revolutions per minute, a carbide tip, a ATB tooth grind, -15 Degrees s hook angle, and a ⅝ inch round arbour. It is for use with 5046DWDE circular saw.

This circular saw blade has a 10 inches diameter, 0.091 ultra thin kerf thickness, and 0.071 inch plate thickness. It has 5870 RPM, a carbide tip, five Degrees hook angle, and a ⅝ inch round arbour. The cross cutting blade has 60 teeth, and an alternate top alternate face tooth grind. It is suitable for use in cutting wood, particleboard, and laminates.

This circular saw blade has a 10 inches diameter, 0.091 ultra thin kerf thickness, and 0.071 inch plate thickness. It has 5870 RPM, a carbide tip, five Degrees hook angle, and a ⅝ inch round arbour. The cross cutting blade has 60 teeth, and an alternate top alternate face tooth grind. It is suitable for use in cutting wood, particleboard, and laminates.

This circular saw blade has a 7¼-inch diameter, 0.071 ultra thin kerf thickness, and 0.047 inch plate thickness. It has 8300 maximum revolutions per minute, a carbide tip, 15 Degrees hook angle, and a ⅝ inch round arbour. The crosscutting blade has 24 teeth, and an M tooth grind. It is suitable for use in cutting wood and framing.

This circular saw blade has a 7¼-inch diameter, 0.071 ultra thin kerf thickness, and 0.047 inch plate thickness. It has 8300 maximum revolutions per minute, a carbide tip, 15 Degrees hook angle, and a ⅝ inch round arbour. The crosscutting blade has 24 teeth, and an M tooth grind. It is suitable for use in cutting wood and framing.

This circular saw blade has 10 inches diameter and 0.071 inch plate thickness. It has 24 teeth and a maximum cutting-edge of 6¼ inches depth. The general-purpose blade has 5990 RPM, a carbide tip, a ATB tooth grind, 20 Degrees s hook angle, and a ⅝ inch round arbour. It is for use with 2703, 2704, and 2705 circular saws.

This circular saw blade has 10 inches diameter and 0.071 inch plate thickness. It has 24 teeth and a maximum cutting-edge of 6¼ inches depth. The general-purpose blade has 5990 RPM, a carbide tip, a ATB tooth grind, 20 Degrees s hook angle, and a ⅝ inch round arbour. It is for use with 2703, 2704, and 2705 circular saws.

This circular saw blade has a 12-inch diameter and a 0.075 inch plate thickness. It has 1500 maximum RPM, a carbide tip, zero Degrees hook angle, and a one inch arbour. The blade has 76 teeth and a modified alternate top bevel tooth grind. It is suitable for cutting stainless steel, tubing, and angle iron of 5½ inches depth.

This circular saw blade has a 12-inch diameter and a 0.075 inch plate thickness. It has 1500 maximum RPM, a carbide tip, zero Degrees hook angle, and a one inch arbour. The blade has 76 teeth and a modified alternate top bevel tooth grind. It is suitable for cutting stainless steel, tubing, and angle iron of 5½ inches depth.

This circular saw blade has 7½ inches diameter and 0.055 inch plate thickness. It has 60 teeth, 8040 maximum revolutions per minute, a ATB tooth grind, 10 Degrees s hook angle, and a ⅝-inch arbour. It is for use with LS0714 circular saw.

This circular saw blade has 7½ inches diameter and 0.055 inch plate thickness. It has 60 teeth, 8040 maximum revolutions per minute, a ATB tooth grind, 10 Degrees s hook angle, and a ⅝-inch arbour. It is for use with LS0714 circular saw.

This metal-cutting circular saw blade has a 7¼-inch diameter and 0.051 inch plate thickness. It has 5800 maximum RPM, a carbide tip, a -10 Degrees hook angle, and a ⅝-inch arbour. The crosscutting blade has 70 teeth and flat top grind teeth. It is suitable for cutting thin gauge sheets, corrugated, metal studs, and other thin gauge ferrous metals.

This metal-cutting circular saw blade has a 7¼-inch diameter and 0.051 inch plate thickness. It has 5800 maximum RPM, a carbide tip, a -10 Degrees hook angle, and a ⅝-inch arbour. The crosscutting blade has 70 teeth and flat top grind teeth. It is suitable for cutting thin gauge sheets, corrugated, metal studs, and other thin gauge ferrous metals.