Tubes en polyéthylène à air et à eau

Ce bouchon anti-poussière en aluminium conforme à la norme A-A-59326 est doté d'un adaptateur mâle avec une taille de raccord de 3/4 pouce. Le composant de serrage est un bouchon avec un type de serrage DP et a le diamètre extérieur du bouchon est de 1-1/4 po. Ce bouchon peut être utilisé dans l'eau et les applications générales. Sa température de fonctionnement est de 0 °F à 200 °F, avec une pression de fonctionnement maximale de 250 lb/po2.

Ce bouchon anti-poussière en aluminium conforme à la norme A-A-59326 est doté d'un adaptateur mâle avec une taille de raccord de 3/4 pouce. Le composant de serrage est un bouchon avec un type de serrage DP et a le diamètre extérieur du bouchon est de 1-1/4 po. Ce bouchon peut être utilisé dans l'eau et les applications générales. Sa température de fonctionnement est de 0 °F à 200 °F, avec une pression de fonctionnement maximale de 250 lb/po2.

Ce tube en PTFE blanc de 5 pi de long, certifié par la FDA/3A 20-27, a un rayon de courbure de 55 mm et une épaisseur de paroi de 1 1/2 mm. Le diamètre intérieur est de 6 mm et le diamètre extérieur est de 9 mm. La température de fonctionnement est de -150 °F à 500 °F, avec une pression maximale de 140 lb/po2. Il peut être utilisé dans des applications pneumatiques. Ce tube présente une dureté de 65D.

Ce tube en PTFE blanc de 5 pi de long, certifié par la FDA/3A 20-27, a un rayon de courbure de 55 mm et une épaisseur de paroi de 1 1/2 mm. Le diamètre intérieur est de 6 mm et le diamètre extérieur est de 9 mm. La température de fonctionnement est de -150 °F à 500 °F, avec une pression maximale de 140 lb/po2. Il peut être utilisé dans des applications pneumatiques. Ce tube présente une dureté de 65D.

Ce tube Viton noir de 25 pi de long a une épaisseur de paroi de 3/16 po. Le diamètre intérieur est de 3/4 po, et le diamètre extérieur est de 1-1/8 po. La température d'utilisation est de -10 °F à 400 °F avec une pression maximale de 145 lb/po2. Il peut être utilisé dans des applications pneumatiques.

Ce tube Viton noir de 25 pi de long a une épaisseur de paroi de 3/16 po. Le diamètre intérieur est de 3/4 po, et le diamètre extérieur est de 1-1/8 po. La température d'utilisation est de -10 °F à 400 °F avec une pression maximale de 145 lb/po2. Il peut être utilisé dans des applications pneumatiques.

This high-density polyethylene tubing measures 100 feet x 1/4 inches diameter. It has a maximum pressure of 250 PSI and a temperature range of -40 to 250℉.

This high-density polyethylene tubing measures 100 feet x 1/4 inches diameter. It has a maximum pressure of 250 PSI and a temperature range of -40 to 250℉.

This low-density polyethylene tubing measures 100 feet x 1/4 inches diameter. It has a maximum pressure of 125 PSI and a temperature range of -40 to 160℉.

This low-density polyethylene tubing measures 100 feet x 1/4 inches diameter. It has a maximum pressure of 125 PSI and a temperature range of -40 to 160℉.

This tubing meets the standards for FDA, has a length of 100 feet, a maximum operating pressure of 100 psi and is designed for the following applications: air, beverage, soda transfer, water. It is white, has an operating temperature of -40 Degrees F to 160 Degrees F and is resistant to corrosion, crack, fungus and is made of polyethylene. In addition, it has ⅜ inch outside diameter, 0.25 inch inside diameter, with an imperial system of measurement, with 0.062 inch wall thickness.

This tubing meets the standards for FDA, has a length of 100 feet, a maximum operating pressure of 100 psi and is designed for the following applications: air, beverage, soda transfer, water. It is white, has an operating temperature of -40 Degrees F to 160 Degrees F and is resistant to corrosion, crack, fungus and is made of polyethylene. In addition, it has ⅜ inch outside diameter, 0.25 inch inside diameter, with an imperial system of measurement, with 0.062 inch wall thickness.

This high-density polyethylene tubing measures 100 feet x 1/2 inches diameter. It has a maximum pressure of 250 PSI and a temperature range of -40 to 250℉.

This high-density polyethylene tubing measures 100 feet x 1/2 inches diameter. It has a maximum pressure of 250 PSI and a temperature range of -40 to 250℉.

This FDA-certified, clear polyethylene tubing is five-feet long with a tube bend radius of two inches and a wall thickness of 1/16 inch. The inside diameter is 1/2 inch and the outside diameter is 5/8 inch. Its operating temperature is -85 Degrees F to 140 Degrees F, with a maximum operating pressure of 290 PSI. This tubing is used in air, chemical, water, food and beverage-based applications.

This FDA-certified, clear polyethylene tubing is five-feet long with a tube bend radius of two inches and a wall thickness of 1/16 inch. The inside diameter is 1/2 inch and the outside diameter is 5/8 inch. Its operating temperature is -85 Degrees F to 140 Degrees F, with a maximum operating pressure of 290 PSI. This tubing is used in air, chemical, water, food and beverage-based applications.

This FDA-certified, clear polyethylene tubing is five-feet long with a tube bend radius of 1 7/16 inch and a wall thickness of 1/16 inch. The inside diameter is 1/4-inch and the outside diameter is 3/8 inch. Its operating temperature is -85 Degrees F to 140 Degrees F, with a maximum operating pressure of 290 PSI. This tubing is used in air, chemical, water, food and beverage-based applications.

This FDA-certified, clear polyethylene tubing is five-feet long with a tube bend radius of 1 7/16 inch and a wall thickness of 1/16 inch. The inside diameter is 1/4-inch and the outside diameter is 3/8 inch. Its operating temperature is -85 Degrees F to 140 Degrees F, with a maximum operating pressure of 290 PSI. This tubing is used in air, chemical, water, food and beverage-based applications.

This FDA-certified, clear polyethylene tubing is 25 feet long with a tube bend radius of 1 5/8 inches and a wall thickness of 1/16 inch. The inside diameter is 3/8 inch and the outside diameter is 1/2 inch. Its operating temperature is -85 Degrees F to 140 Degrees F, with a maximum operating pressure of 290 PSI. This tubing is used in air, chemical, water, food and beverage-based applications.

This FDA-certified, clear polyethylene tubing is 25 feet long with a tube bend radius of 1 5/8 inches and a wall thickness of 1/16 inch. The inside diameter is 3/8 inch and the outside diameter is 1/2 inch. Its operating temperature is -85 Degrees F to 140 Degrees F, with a maximum operating pressure of 290 PSI. This tubing is used in air, chemical, water, food and beverage-based applications.

This tubing meets the standards for FDA, has a length of 100 feet, a maximum operating pressure of 150 psi @ 75 Degrees F and is designed for the following applications: air, lubricant, water. It is white, has an operating temperature of -50 Degrees F to 140 Degrees F, is made of LLDPE. In addition, it has 6 mm outside diameter, 4 mm inside diameter, with a metric system of measurement, with 1 mm wall thickness, and Shore A 98 hardness. This tubing is for use with gas.

This tubing meets the standards for FDA, has a length of 100 feet, a maximum operating pressure of 150 psi @ 75 Degrees F and is designed for the following applications: air, lubricant, water. It is white, has an operating temperature of -50 Degrees F to 140 Degrees F, is made of LLDPE. In addition, it has 6 mm outside diameter, 4 mm inside diameter, with a metric system of measurement, with 1 mm wall thickness, and Shore A 98 hardness. This tubing is for use with gas.