Non-coolant-through high-speed steel jobber-length drill bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed. High-speed steel drill bits provide more flexibility and absorb more shock and vibration than cobalt, powdered-metal, and carbide drill bits, making them suitable for use in manual drilling machines and handheld power tools. They may leave a rough finish on the hole. Jobber-length drill bits are the most commonly used drill-bit length. They provide a good balance of strength and accuracy when drilling into a range of materials.
This jobber length drill bit is made of high speed steel and has a 7/32 inch diameter shank. It is designed for use with composite. This jobber length drill bit has a TiN finish, and has fractional inch measurements. It is non-coolant through with a 3¾ inch length. Plus it has 3¾ inch spiral flutes, a straight shank, and a 135 Degrees split point drill point.
This jobber length drill bit is made of high speed steel and has a 7/32 inch diameter shank. It is designed for use with composite. This jobber length drill bit has a TiN finish, and has fractional inch measurements. It is non-coolant through with a 3¾ inch length. Plus it has 3¾ inch spiral flutes, a straight shank, and a 135 Degrees split point drill point.
This pilot point drill bit is made of high speed steel and has a 13/32 inch diameter, 1⅜ inch long shank. It is for use with metal, plastic, wood. This jobber length pilot point drill bit has a gold ferrous finish, and has fractional inch measurements. It is non-coolant through with a 5¼ inch length. Plus it has 3⅞ inch spiral flutes, a straight shank, and 135 Degrees pilot point drill point.
This pilot point drill bit is made of high speed steel and has a 13/32 inch diameter, 1⅜ inch long shank. It is for use with metal, plastic, wood. This jobber length pilot point drill bit has a gold ferrous finish, and has fractional inch measurements. It is non-coolant through with a 5¼ inch length. Plus it has 3⅞ inch spiral flutes, a straight shank, and 135 Degrees pilot point drill point.
This drill bit is made of high speed steel and has a 17/64 inch diameter shank. It is designed for general purpose use, including light gauge metal, plastics, steel, wood. This jobber length drill bit has a black oxide finish, and has fractional inch measurements. It is non-coolant through with a 4⅛ inch length. Plus it has 2⅞ inch spiral flutes, a straight shank, and a 135 Degrees split point.
This drill bit is made of high speed steel and has a 17/64 inch diameter shank. It is designed for general purpose use, including light gauge metal, plastics, steel, wood. This jobber length drill bit has a black oxide finish, and has fractional inch measurements. It is non-coolant through with a 4⅛ inch length. Plus it has 2⅞ inch spiral flutes, a straight shank, and a 135 Degrees split point.
This drill bit is made of high speed steel and has a 11/64 inch diameter, 1 9/64 inch long shank. It is designed for general purpose use, including light gauge metal, plastics, steel, wood. This jobber length drill bit has a black oxide finish, and has fractional inch measurements. It is non-coolant through with a 3¼ inch length. Plus it has 2 7/64 inch spiral flutes, a straight shank, and a 135 Degrees split point.
This drill bit is made of high speed steel and has a 11/64 inch diameter, 1 9/64 inch long shank. It is designed for general purpose use, including light gauge metal, plastics, steel, wood. This jobber length drill bit has a black oxide finish, and has fractional inch measurements. It is non-coolant through with a 3¼ inch length. Plus it has 2 7/64 inch spiral flutes, a straight shank, and a 135 Degrees split point.
This pilot point drill bit is made of high speed steel and has a 13/64 inch diameter, 1 2/1one-inch long shank. It is for use with metal, plastic, wood. This jobber length pilot point drill bit has a gold ferrous finish, and has fractional inch measurements. It is non-coolant through with a 3 31/50 inch length. Plus it has 2 7/16 inch spiral flutes, a straight shank, and 135 Degrees pilot point drill point.
This pilot point drill bit is made of high speed steel and has a 13/64 inch diameter, 1 2/1one-inch long shank. It is for use with metal, plastic, wood. This jobber length pilot point drill bit has a gold ferrous finish, and has fractional inch measurements. It is non-coolant through with a 3 31/50 inch length. Plus it has 2 7/16 inch spiral flutes, a straight shank, and 135 Degrees pilot point drill point.
This drill bit is made of high speed steel and has a 25/64 inch diameter, 1 10/27 inch long shank. It is designed for general purpose use, including light gauge metal, plastics, steel, wood. This jobber length drill bit has a black oxide finish, and has fractional inch measurements. It is non-coolant through with a 5⅛ inch length. Plus it has 3¾ inch spiral flutes, a straight shank, and a 135 Degrees split point.
This drill bit is made of high speed steel and has a 25/64 inch diameter, 1 10/27 inch long shank. It is designed for general purpose use, including light gauge metal, plastics, steel, wood. This jobber length drill bit has a black oxide finish, and has fractional inch measurements. It is non-coolant through with a 5⅛ inch length. Plus it has 3¾ inch spiral flutes, a straight shank, and a 135 Degrees split point.
This jobber length drill bit is made of high speed steel and has a ⅜ inch diameter shank. It is designed for use with composite. This jobber length drill bit has a TiN finish, and has fractional inch measurements. It is non-coolant through with a five-inch length. Plus it has 3 9/16 inch spiral flutes, a straight shank, and a 135 Degrees split point drill point.
This jobber length drill bit is made of high speed steel and has a ⅜ inch diameter shank. It is designed for use with composite. This jobber length drill bit has a TiN finish, and has fractional inch measurements. It is non-coolant through with a five-inch length. Plus it has 3 9/16 inch spiral flutes, a straight shank, and a 135 Degrees split point drill point.
This jobber length drill bit is made of high speed steel and has a ½ inch diameter shank. It is designed for use with composite. This jobber length drill bit has a TiN finish, and has fractional inch measurements. It is non-coolant through with a six-inch length. Plus it has 4½ inch spiral flutes, a straight shank, and a 135 Degrees split point drill point.
This jobber length drill bit is made of high speed steel and has a ½ inch diameter shank. It is designed for use with composite. This jobber length drill bit has a TiN finish, and has fractional inch measurements. It is non-coolant through with a six-inch length. Plus it has 4½ inch spiral flutes, a straight shank, and a 135 Degrees split point drill point.
This drill bit is made of high speed steel and has a 19/64 inch diameter, 1 1/3 inch long shank. It is designed for general purpose use, including light gauge metal, plastics, steel, wood. This jobber length drill bit has a black oxide finish, and has fractional inch measurements. It is non-coolant through with a 4⅜ inch length. Plus it has 3 3/64 inch spiral flutes, a straight shank, and a 135 Degrees split point.
This drill bit is made of high speed steel and has a 19/64 inch diameter, 1 1/3 inch long shank. It is designed for general purpose use, including light gauge metal, plastics, steel, wood. This jobber length drill bit has a black oxide finish, and has fractional inch measurements. It is non-coolant through with a 4⅜ inch length. Plus it has 3 3/64 inch spiral flutes, a straight shank, and a 135 Degrees split point.
Ce foret à pointe pilote est en acier rapide et a une tige de 9/32 po de diamètre. Il est destiné à être utilisé avec le métal, le plastique et le bois. Ce foret court à pointe pilote a une finition ferreuse dorée et des mesures fractionnaires en po. Il est sans canal de refroidissement et a une longueur de 4 1/4 po. De plus, il a des cannelures hélicoïdales de 2 15/16 po, une tige droite et un angle de pointe de 135°.
Ce foret à pointe pilote est en acier rapide et a une tige de 9/32 po de diamètre. Il est destiné à être utilisé avec le métal, le plastique et le bois. Ce foret court à pointe pilote a une finition ferreuse dorée et des mesures fractionnaires en po. Il est sans canal de refroidissement et a une longueur de 4 1/4 po. De plus, il a des cannelures hélicoïdales de 2 15/16 po, une tige droite et un angle de pointe de 135°.
Ce foret à pointe pilote est en acier rapide et a un diamètre de 3/32 po/une tige longue de 1 po. Il est destiné à être utilisé avec le métal, le plastique et le bois. Ce foret court à pointe pilote a une finition ferreuse dorée et des mesures fractionnaires en po. Il est sans canal de refroidissement et a une longueur de 2 1/4 po. De plus, il a des cannelures hélicoïdales de 1 1/4 po, une tige droite et un angle de pointe de 135°.
Ce foret à pointe pilote est en acier rapide et a un diamètre de 3/32 po/une tige longue de 1 po. Il est destiné à être utilisé avec le métal, le plastique et le bois. Ce foret court à pointe pilote a une finition ferreuse dorée et des mesures fractionnaires en po. Il est sans canal de refroidissement et a une longueur de 2 1/4 po. De plus, il a des cannelures hélicoïdales de 1 1/4 po, une tige droite et un angle de pointe de 135°.
Ce foret en acier rapide a un diamètre de 15/32 po/une tige de 1 29/64 po de long. Il est conçu pour un usage général, y compris le métal de faible épaisseur, les plastiques, l'acier, le bois. Ce foret a un fini oxyde noir et des mesures fractionnaires en po. Sans canal de refroidissement et 5 3/4po de long. De plus, il a des cannelures hélicoïdales de 4 19/64 po, une tige droite et un angle de pointe de 135°.
Ce foret en acier rapide a un diamètre de 15/32 po/une tige de 1 29/64 po de long. Il est conçu pour un usage général, y compris le métal de faible épaisseur, les plastiques, l'acier, le bois. Ce foret a un fini oxyde noir et des mesures fractionnaires en po. Sans canal de refroidissement et 5 3/4po de long. De plus, il a des cannelures hélicoïdales de 4 19/64 po, une tige droite et un angle de pointe de 135°.
Ce foret à pointe pilote est en acier rapide et a une tige de 31/64 po de diamètre. Il est destiné à être utilisé avec le métal, le plastique et le bois. Ce foret court à pointe pilote a une finition ferreuse dorée et des mesures fractionnaires en po. Il est sans canal de refroidissement et mesure 5 22/25 po de long. De plus, il a des cannelures hélicoïdales de 4 3/8 po, une tige droite et un angle de pointe de 135°.
Ce foret à pointe pilote est en acier rapide et a une tige de 31/64 po de diamètre. Il est destiné à être utilisé avec le métal, le plastique et le bois. Ce foret court à pointe pilote a une finition ferreuse dorée et des mesures fractionnaires en po. Il est sans canal de refroidissement et mesure 5 22/25 po de long. De plus, il a des cannelures hélicoïdales de 4 3/8 po, une tige droite et un angle de pointe de 135°.
Ce foret à pointe pilote est en acier rapide et a une tige de 21/64 po de diamètre. Il est destiné à être utilisé avec le métal, le plastique et le bois. Ce foret court à pointe pilote a une finition ferreuse dorée et des mesures fractionnaires en po. Il est sans canal de refroidissement et mesure 4 31/50 po de long. De plus, il a des cannelures hélicoïdales de 3 19/64 po, une tige droite et un angle de pointe de 135°.
Ce foret à pointe pilote est en acier rapide et a une tige de 21/64 po de diamètre. Il est destiné à être utilisé avec le métal, le plastique et le bois. Ce foret court à pointe pilote a une finition ferreuse dorée et des mesures fractionnaires en po. Il est sans canal de refroidissement et mesure 4 31/50 po de long. De plus, il a des cannelures hélicoïdales de 3 19/64 po, une tige droite et un angle de pointe de 135°.
Ce foret à pointe pilote est en acier rapide et a un diamètre de 15/64 po/une longueur de tige de 1 23/85 po. Il est destiné à être utilisé avec le métal, le plastique et le bois. Ce foret court à pointe pilote a une finition ferreuse dorée et des mesures fractionnaires en po. Il est sans canal de refroidissement et mesure 3 22/25 po de long. De plus, il a des cannelures hélicoïdales de 2 39/64 po, une tige droite et un angle de pointe de 135°.
Ce foret à pointe pilote est en acier rapide et a un diamètre de 15/64 po/une longueur de tige de 1 23/85 po. Il est destiné à être utilisé avec le métal, le plastique et le bois. Ce foret court à pointe pilote a une finition ferreuse dorée et des mesures fractionnaires en po. Il est sans canal de refroidissement et mesure 3 22/25 po de long. De plus, il a des cannelures hélicoïdales de 2 39/64 po, une tige droite et un angle de pointe de 135°.
This pilot point drill bit is made of high speed steel and has a 5/32 inch diameter, 1 3/25 inch long shank. It is designed for use with metal, plastic, wood. This jobber length pilot point drill bit has a gold ferrous finish, and has fractional inch measurements. It is non-coolant through with a 3⅛ inch length. Plus it has 2 inch spiral flutes, a straight shank, and a 135 Degrees split point.
This pilot point drill bit is made of high speed steel and has a 5/32 inch diameter, 1 3/25 inch long shank. It is designed for use with metal, plastic, wood. This jobber length pilot point drill bit has a gold ferrous finish, and has fractional inch measurements. It is non-coolant through with a 3⅛ inch length. Plus it has 2 inch spiral flutes, a straight shank, and a 135 Degrees split point.
To view Availability for another location, please enter postal code below
Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order.
