These single-channel surface raceways are nonmetallic. They can install both indoors and outdoors and are suited for spaces that are out of reach or have low amounts of traffic, where they are unlikely to be disturbed. They're more lightweight than metallic raceways to facilitate installations. These raceways mount on walls and ceilings, and route wire and cable throughout an area. Wire and cable are laid into the raceways, keeping the conductors from being exposed and preventing kinks. They have a single channel, so they're ideal for simple installations where wire and cable don't need to be separated. These raceways are commonly installed in educational facilities, offices, and hospitals and are used with communication, power, and low-voltage data cable. Individual components in raceway systems must be purchased from the same brand and series to ensure compatibility.
This PN05 blank end fitting is made of non-metallic, and is ivory-coloured. It includes one blank end fitting. In addition, it meets the standards for UL listed. It also has snap-on mounting.
This PN05 blank end fitting is made of non-metallic, and is ivory-coloured. It includes one blank end fitting. In addition, it meets the standards for UL listed. It also has snap-on mounting.
This 2300 wire clip is made of PVC, and is ivory-coloured. It features holds conductors in place, and includes one wire clip. In addition, it meets the standards for UL and CSA. It also has snap-on mounting.
This 2300 wire clip is made of PVC, and is ivory-coloured. It features holds conductors in place, and includes one wire clip. In addition, it meets the standards for UL and CSA. It also has snap-on mounting.
This PN03 tee fitting is made of non-metallic, and is ivory-coloured. It includes one tee. In addition, it meets the standards for UL listed. It also has snap-on mounting.
This PN03 tee fitting is made of non-metallic, and is ivory-coloured. It includes one tee. In addition, it meets the standards for UL listed. It also has snap-on mounting.
This PN05 raceway is made of non-metallic, and is ivory-coloured. In addition, it meets the standards for PEP and RoHS. It has length of 96 inches, width of 1 1/eight inches, and a height of 5/8-inch. It can be used outdoors. It also has adhesive mounting.
This PN05 raceway is made of non-metallic, and is ivory-coloured. In addition, it meets the standards for PEP and RoHS. It has length of 96 inches, width of 1 1/eight inches, and a height of 5/8-inch. It can be used outdoors. It also has adhesive mounting.
This PN03 raceway is made of non-metallic, and is ivory-coloured. In addition, it meets the standards for PEP. It has length of 96 inches, width of 13/16 inch, and a height of ½ inch. It can be used outdoors. It also has adhesive mounting.
This PN03 raceway is made of non-metallic, and is ivory-coloured. In addition, it meets the standards for PEP. It has length of 96 inches, width of 13/16 inch, and a height of ½ inch. It can be used outdoors. It also has adhesive mounting.
This PN10 raceway is made of non-metallic, and is ivory-coloured. In addition, it meets the standards for PEP and RoHS. It has length of 96 inches, width of 1 11/16 inch, and a height of 13/16 inches. It can be used outdoors. It also has adhesive mounting.
This PN10 raceway is made of non-metallic, and is ivory-coloured. In addition, it meets the standards for PEP and RoHS. It has length of 96 inches, width of 1 11/16 inch, and a height of 13/16 inches. It can be used outdoors. It also has adhesive mounting.
This 400 raceway is made of PVC, and is ivory-coloured. It includes wide adhesive tape. In addition, it meets the standards for PEP and RoHS. It has length of 60 inches, width of⅞ inch, and a height of 7/16 inches. It can be used outdoors. It also has adhesive mounting.
This 400 raceway is made of PVC, and is ivory-coloured. It includes wide adhesive tape. In addition, it meets the standards for PEP and RoHS. It has length of 60 inches, width of⅞ inch, and a height of 7/16 inches. It can be used outdoors. It also has adhesive mounting.
This PN03, PN05, PN10 power box is made of non-metallic, and is ivory-coloured. It features accepts communication and/or power wiring, datacom connectivity options, easy to align, lightweight and easy to handle, snap-on latching cover. It has length of 4.75 inches, width of three inches, and a height of 1.75 inch. It is for use with Eclipse PN03, PN05, PN10 Raceways.
This PN03, PN05, PN10 power box is made of non-metallic, and is ivory-coloured. It features accepts communication and/or power wiring, datacom connectivity options, easy to align, lightweight and easy to handle, snap-on latching cover. It has length of 4.75 inches, width of three inches, and a height of 1.75 inch. It is for use with Eclipse PN03, PN05, PN10 Raceways.
This PN10 90 Degrees external elbow is made of non-metallic, and is ivory-coloured. It features for right angle turns around external corners, and includes one elbow. In addition, it meets the standards for UL listed. It also has snap-on mounting.
This PN10 90 Degrees external elbow is made of non-metallic, and is ivory-coloured. It features for right angle turns around external corners, and includes one elbow. In addition, it meets the standards for UL listed. It also has snap-on mounting.
This 400 internal elbow is made of non-metallic, and is ivory-coloured. It features for right angle turns around internal corners, and includes one internal elbow. In addition, it meets the standards for cULus listed. It also has snap-on mounting.
This 400 internal elbow is made of non-metallic, and is ivory-coloured. It features for right angle turns around internal corners, and includes one internal elbow. In addition, it meets the standards for cULus listed. It also has snap-on mounting.
This PN05 tee fitting is made of non-metallic, and is ivory-coloured. It includes one tee. In addition, it meets the standards for UL listed. It also has snap-on mounting.
This PN05 tee fitting is made of non-metallic, and is ivory-coloured. It includes one tee. In addition, it meets the standards for UL listed. It also has snap-on mounting.
This 2300 raceway is made of PVC, and is ivory-coloured. It includes wide adhesive tape. In addition, it meets the standards for PEP and RoHS. It has length of 60 inches, width of 2¼ inch, and a height of 11/16 inches. It can be used outdoors. It also has adhesive mounting.
This 2300 raceway is made of PVC, and is ivory-coloured. It includes wide adhesive tape. In addition, it meets the standards for PEP and RoHS. It has length of 60 inches, width of 2¼ inch, and a height of 11/16 inches. It can be used outdoors. It also has adhesive mounting.
This PN10 tee fitting is made of non-metallic, and is ivory-coloured. It includes one tee. In addition, it meets the standards for UL listed. It also has snap-on mounting.
This PN10 tee fitting is made of non-metallic, and is ivory-coloured. It includes one tee. In addition, it meets the standards for UL listed. It also has snap-on mounting.
To view Availability for another location, please enter postal code below
Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order.
