These single-channel surface raceways have a durable metallic construction. They protect wire and cable from impact damage and can install in indoor areas with high traffic. They mount on walls and ceilings and route wire and cable throughout an area. Wire and cable are laid into the raceways, which keep the conductors from being exposed and prevent kinks. They have a single channel, so they're ideal for simple installations where wire and cable don't need to be separated. These raceways are commonly installed in spaces such as educational facilities, labs, hospitals, and manufacturing facilities and are used with electrical wiring and communication, power, and A/V cable. Individual components in raceway systems must be purchased from the same brand and series to ensure compatibility.
This 500, 700 shallow switch and receptacle box is made of steel, and is ivory-coloured. It features fittings have removable covers, low-profile, scuffcoat finish. In addition, it meets the standards for File E41751 Guide RJPR, meets Article 386 of NEC and meets Section 12-600 of CEC, RoHS, UL and cUL listed File E4376 Guide RJBT. It has length of 4.62 inches, width of 2.87 inches, and a height of 0.937 inch. It is for use with 500 and 700 raceways.
This 500, 700 shallow switch and receptacle box is made of steel, and is ivory-coloured. It features fittings have removable covers, low-profile, scuffcoat finish. In addition, it meets the standards for File E41751 Guide RJPR, meets Article 386 of NEC and meets Section 12-600 of CEC, RoHS, UL and cUL listed File E4376 Guide RJBT. It has length of 4.62 inches, width of 2.87 inches, and a height of 0.937 inch. It is for use with 500 and 700 raceways.
This 3000 duplex receptacle cover is grey. It features for installing commercially 15a and 20a duplex receptacles, and includes g3007c device bracket. In addition, it meets the standards for File E41751: Guide RJPR, PEP and RoHS. It has length of 4½ inch, width of 2¾-inch, and a height of 1½ inch. It is for use with 3000 Raceways.
This 3000 duplex receptacle cover is grey. It features for installing commercially 15a and 20a duplex receptacles, and includes g3007c device bracket. In addition, it meets the standards for File E41751: Guide RJPR, PEP and RoHS. It has length of 4½ inch, width of 2¾-inch, and a height of 1½ inch. It is for use with 3000 Raceways.
This 700 connection cover is made of steel, and is ivory-coloured. In addition, it meets the standards for File E4376 Guide RJBT, Fittings: File E4751 Guide RJPR, meets Article 386 of NEC, meets Section 12-1600 of CEC, PEP and RoHS. It has length of ¾-inch, width of ¾-inch, and a height of ¾-inch. It is for use with 500 small raceways, 700 small raceways.
This 700 connection cover is made of steel, and is ivory-coloured. In addition, it meets the standards for File E4376 Guide RJBT, Fittings: File E4751 Guide RJPR, meets Article 386 of NEC, meets Section 12-1600 of CEC, PEP and RoHS. It has length of ¾-inch, width of ¾-inch, and a height of ¾-inch. It is for use with 500 small raceways, 700 small raceways.
This 4000 internal elbow is made of steel, and is grey. It features 90 Degrees internal corners, fiber bushing included, and includes one internal elbow, one fiber bushing. In addition, it meets the standards for ADA compliant, cULus, UL listed, UL5. It also has screw-on mounting.
This 4000 internal elbow is made of steel, and is grey. It features 90 Degrees internal corners, fiber bushing included, and includes one internal elbow, one fiber bushing. In addition, it meets the standards for ADA compliant, cULus, UL listed, UL5. It also has screw-on mounting.
This 4000 raceway is made of steel, and is grey. In addition, it meets the standards for PEP. It has length of 10 feet, width of 4¾-inch, and a height of 1¾-inch. It can be used outdoors. It also has screw-on mounting.
This 4000 raceway is made of steel, and is grey. In addition, it meets the standards for PEP. It has length of 10 feet, width of 4¾-inch, and a height of 1¾-inch. It can be used outdoors. It also has screw-on mounting.
This 4000 2-gang device plate is made of steel, and is ivory-coloured. It includes one device plate. In addition, it meets the standards for UL and cUL. It has width of 4¾-inch, and a height of 5 1/8 inch. It is for use with 4000/6000 Raceway.
This 4000 2-gang device plate is made of steel, and is ivory-coloured. It includes one device plate. In addition, it meets the standards for UL and cUL. It has width of 4¾-inch, and a height of 5 1/8 inch. It is for use with 4000/6000 Raceway.
This 4000 entrance end is made of steel, and is ivory-coloured. It features full capacity entrance end fitting, and includes entrance end fitting. In addition, it meets the standards for ADA compliant, cULus, UL listed, UL5. It also has screw-on mounting.
This 4000 entrance end is made of steel, and is ivory-coloured. It features full capacity entrance end fitting, and includes entrance end fitting. In addition, it meets the standards for ADA compliant, cULus, UL listed, UL5. It also has screw-on mounting.
This 4000 wire clip is made of steel, and is white. It features holds conductors in place, and includes one wire clip. In addition, it meets the standards for ADA compliant, cULus, UL, UL5.
This 4000 wire clip is made of steel, and is white. It features holds conductors in place, and includes one wire clip. In addition, it meets the standards for ADA compliant, cULus, UL, UL5.
This 2400 external elbow is made of steel, and is ivory-coloured. It includes one external elbow. In addition, it meets the standards for cULus listed. It also has screw-on mounting.
This 2400 external elbow is made of steel, and is ivory-coloured. It includes one external elbow. In addition, it meets the standards for cULus listed. It also has screw-on mounting.
This 3000 cover is made of steel, and is grey. It features power or data/communication devices can be wired into the raceway for a flush appearance satisfying both aesthetic and functional requirements. In addition, it meets the standards for File E4376: Guide RJBT/RJBT7, PEP and RoHS. It has length of 60 inches, width of 2¾-inch, and a height of ¼ inch. It is for use with 3000 Raceways.
This 3000 cover is made of steel, and is grey. It features power or data/communication devices can be wired into the raceway for a flush appearance satisfying both aesthetic and functional requirements. In addition, it meets the standards for File E4376: Guide RJBT/RJBT7, PEP and RoHS. It has length of 60 inches, width of 2¾-inch, and a height of ¼ inch. It is for use with 3000 Raceways.
This 3000 90 Degrees flat elbow is made of steel, and is ivory-coloured. It features right angle turns on the same surface and includes one flat elbow. In addition, it meets the standards for ADA compliant, cULus, UL listed, UL5. It also has screw-on mounting.
This 3000 90 Degrees flat elbow is made of steel, and is ivory-coloured. It features right angle turns on the same surface and includes one flat elbow. In addition, it meets the standards for ADA compliant, cULus, UL listed, UL5. It also has screw-on mounting.
This 3000 cover clip is made of steel, and is ivory-coloured. In addition, it meets the standards for Base and Blank Cover: meets Article 386 of NEC, File E4376 Guide RJBT, Fittings: File E41751 Guide RJPR, meets Section 12-600 of CEC, PEP and RoHS. It has length of 2 13/16 inch, width of ¾-inch, and a height of ½ inch. It is for use with 3000 Raceways.
This 3000 cover clip is made of steel, and is ivory-coloured. In addition, it meets the standards for Base and Blank Cover: meets Article 386 of NEC, File E4376 Guide RJBT, Fittings: File E41751 Guide RJPR, meets Section 12-600 of CEC, PEP and RoHS. It has length of 2 13/16 inch, width of ¾-inch, and a height of ½ inch. It is for use with 3000 Raceways.
This 2400 cover is made of steel, and is ivory-coloured. In addition, it meets the standards for File E4376: Guide RJBT/RJBT7, PEP and RoHS. It has length of 60 inches, width of 1 15/16 inch, and a height of ¼ inch. It is for use with 2400 Raceways.
This 2400 cover is made of steel, and is ivory-coloured. In addition, it meets the standards for File E4376: Guide RJBT/RJBT7, PEP and RoHS. It has length of 60 inches, width of 1 15/16 inch, and a height of ¼ inch. It is for use with 2400 Raceways.
This 500, 700 supporting clip is made of steel, and is ivory-coloured. It includes one supporting clip. In addition, it meets the standards for UL and CSA. It also has screw-on mounting.
This 500, 700 supporting clip is made of steel, and is ivory-coloured. It includes one supporting clip. In addition, it meets the standards for UL and CSA. It also has screw-on mounting.
This 500, 700 deep switch and receptacle box is made of steel, and is ivory-coloured. It features fittings have removable covers, low-profile, scuffcoat finish. In addition, it meets the standards for File E41751 Guide RJPR, meets Article 386 of NEC and meets Section 12-600 of CEC, RoHS, UL and cUL listed File E4376 Guide RJBT. It has length of 4.62 inches, width of 2.87 inches, and a height of 2.25 inch. It is for use with 500 and 700 raceways.
This 500, 700 deep switch and receptacle box is made of steel, and is ivory-coloured. It features fittings have removable covers, low-profile, scuffcoat finish. In addition, it meets the standards for File E41751 Guide RJPR, meets Article 386 of NEC and meets Section 12-600 of CEC, RoHS, UL and cUL listed File E4376 Guide RJBT. It has length of 4.62 inches, width of 2.87 inches, and a height of 2.25 inch. It is for use with 500 and 700 raceways.
To view Availability for another location, please enter postal code below
Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order.
