Machine Tool Lights

This tubular light mounting bracket is made of metal/steel and features bolt down. In addition, it includes mounting screws.

This tubular light mounting bracket is made of metal/steel and features bolt down. In addition, it includes mounting screws.

This machine tool light is made of aluminum. In addition, it includes M12 connector, mounting hardware, and a bulb. Plus it meets the standards for CE, cETLus listed, RoHS compliance. It also has 5 watts, and a 10-year manufacturer's warranty.

This machine tool light is made of aluminum. In addition, it includes M12 connector, mounting hardware, and a bulb. Plus it meets the standards for CE, cETLus listed, RoHS compliance. It also has 5 watts, and a 10-year manufacturer's warranty.

Machine Light, Electronic, LED Lamp Type, 13 Watts, 10 - 40 VDC Voltage, Optional Transformer, Black Colour, Waterproof Yes, 10 ft. Cord Length, 60 Degrees Beam Angle, Material of Construction Anodized Aluminum, Mounting Type Surface Mount, Includes Cord, Standards cETLus

Machine Light, Electronic, LED Lamp Type, 13 Watts, 10 - 40 VDC Voltage, Optional Transformer, Black Colour, Waterproof Yes, 10 ft. Cord Length, 60 Degrees Beam Angle, Material of Construction Anodized Aluminum, Mounting Type Surface Mount, Includes Cord, Standards cETLus

This task light features a spot with a 10 degree angle of radiation. In addition, it includes a cord and a bulb. Plus it meets the standards for cETL and is ETL listed. It also has 5 watts, a bottom flanged bulb base, and a five-year manufacturer's warranty.

This task light features a spot with a 10 degree angle of radiation. In addition, it includes a cord and a bulb. Plus it meets the standards for cETL and is ETL listed. It also has 5 watts, a bottom flanged bulb base, and a five-year manufacturer's warranty.

This waterproof, linear, machine tool light is a 12.5-watt LED tubular light with a brightness of 950 lumens. The tube is made of acrylic, and it has and has an average life of 50,000 hours. With a voltage of 34 and 40 volts of alternating current, it is 14 39/64 inches long and has an outside diameter of 2 3/4 inches. This light mounts with a bracket and includes a terminal block. It meets cETL standards.

This waterproof, linear, machine tool light is a 12.5-watt LED tubular light with a brightness of 950 lumens. The tube is made of acrylic, and it has and has an average life of 50,000 hours. With a voltage of 34 and 40 volts of alternating current, it is 14 39/64 inches long and has an outside diameter of 2 3/4 inches. This light mounts with a bracket and includes a terminal block. It meets cETL standards.

This linear machine tool light is made of aluminum. In addition, it includes M12 connector, mounting hardware, and a bulb. Plus it meets the standards for CE, cETLus listed. It also has an electronic ballast, 15 watts, and a 10-year manufacturer's warranty.

This linear machine tool light is made of aluminum. In addition, it includes M12 connector, mounting hardware, and a bulb. Plus it meets the standards for CE, cETLus listed. It also has an electronic ballast, 15 watts, and a 10-year manufacturer's warranty.

This waterproof, linear, machine tool light is a 12-watt LED tubular light with a brightness of 1,100 lumens. It is 14.6 x 12 x 2.75 inches and has a 16-foot cord. This light installs with a mounting bracket, has an aluminum tube, and comes with an M12 connector. It has a voltage of 24 volts of direct current, and an average life of 60,000 hours. This light is cETL approved.

This waterproof, linear, machine tool light is a 12-watt LED tubular light with a brightness of 1,100 lumens. It is 14.6 x 12 x 2.75 inches and has a 16-foot cord. This light installs with a mounting bracket, has an aluminum tube, and comes with an M12 connector. It has a voltage of 24 volts of direct current, and an average life of 60,000 hours. This light is cETL approved.

This LED, hazardous location, linear machine tool light is 9.7 inches long and has a 16-foot cord. Lighting up at 570 lumens, it has a voltage of 34 and 40 volts of alternating current and an average life of 50,000 hours. It is waterproof, with a screw-down base so it doesn't require a ballast, and comes with an M12 connector. This light is cETL approved.

This LED, hazardous location, linear machine tool light is 9.7 inches long and has a 16-foot cord. Lighting up at 570 lumens, it has a voltage of 34 and 40 volts of alternating current and an average life of 50,000 hours. It is waterproof, with a screw-down base so it doesn't require a ballast, and comes with an M12 connector. This light is cETL approved.

This task light features a dimming-capable, no heat generated in the direction of the light beam, no stroboscopic effect. In addition, it includes cord, a plug and a bulb. Plus it meets the standards for cETL and is ETL listed. It also has 8.5 watts, and a five-year manufacturer's warranty.

This task light features a dimming-capable, no heat generated in the direction of the light beam, no stroboscopic effect. In addition, it includes cord, a plug and a bulb. Plus it meets the standards for cETL and is ETL listed. It also has 8.5 watts, and a five-year manufacturer's warranty.

This task light features flood with a 30 degree angle of radiation. In addition, it includes a cord and a bulb. Plus it meets the standards for cETL and is ETL listed. It also has 5 watts, a bottom flanged bulb base, and a five-year manufacturer's warranty.

This task light features flood with a 30 degree angle of radiation. In addition, it includes a cord and a bulb. Plus it meets the standards for cETL and is ETL listed. It also has 5 watts, a bottom flanged bulb base, and a five-year manufacturer's warranty.

This waterproof, linear, machine tool light is a 19-watt LED tubular light with a brightness of 1400 lumens. The tube is made of acrylic, and it has and has an average life of 50,000 hours. With a voltage of 34 and 40 volts of alternating current, it is 20 inches long and has an outside diameter of 2 3/4 inches. This light mounts with a bracket and includes a terminal block. It meets cETL standards.

This waterproof, linear, machine tool light is a 19-watt LED tubular light with a brightness of 1400 lumens. The tube is made of acrylic, and it has and has an average life of 50,000 hours. With a voltage of 34 and 40 volts of alternating current, it is 20 inches long and has an outside diameter of 2 3/4 inches. This light mounts with a bracket and includes a terminal block. It meets cETL standards.

This waterproof, linear, machine tool light is a 50-watt LED tubular light with a brightness of 3800 lumens. The tube is made of glass, and it has and has an average life of 50,000 hours. With a voltage of 34 and 40 volts of alternating current, it is 47 39/64 inches long and has an outside diameter of 2 3/4 inches. This light mounts with a bracket and includes a terminal block. It meets cETL standards.

This waterproof, linear, machine tool light is a 50-watt LED tubular light with a brightness of 3800 lumens. The tube is made of glass, and it has and has an average life of 50,000 hours. With a voltage of 34 and 40 volts of alternating current, it is 47 39/64 inches long and has an outside diameter of 2 3/4 inches. This light mounts with a bracket and includes a terminal block. It meets cETL standards.

This tubular light mounting bracket is made of metal/neoprene/steel. It features a bolt down. In addition, it includes mounting screws.

This tubular light mounting bracket is made of metal/neoprene/steel. It features a bolt down. In addition, it includes mounting screws.

This clip-on tubular light mounting bracket is made of aluminum. It features clip bracket.

This clip-on tubular light mounting bracket is made of aluminum. It features clip bracket.

This LED, hazardous location, linear, machine tool light is 16.5 x 6.7 inches and has a 16-foot cord. Lighting up at 1,900 lumens, it has a voltage of 24 VDC, and an average life of 50,000 hours. It is waterproof, with a screw-down base so it doesn't require a ballast, and comes with an M12 connector. This light is cETL approved.

This LED, hazardous location, linear, machine tool light is 16.5 x 6.7 inches and has a 16-foot cord. Lighting up at 1,900 lumens, it has a voltage of 24 VDC, and an average life of 50,000 hours. It is waterproof, with a screw-down base so it doesn't require a ballast, and comes with an M12 connector. This light is cETL approved.

This linear machine tool light is made of aluminum. In addition, it includes M12 connector, mounting hardware, and a bulb. Plus it meets the standards for CE, cETLus listed. It also has an electronic ballast, 21 watts, and a 10-year manufacturer's warranty.

This linear machine tool light is made of aluminum. In addition, it includes M12 connector, mounting hardware, and a bulb. Plus it meets the standards for CE, cETLus listed. It also has an electronic ballast, 21 watts, and a 10-year manufacturer's warranty.