Epoxy Structural Adhesives

Fixmaster Poxy Pak is a fast cure, general purpose epoxy that bonds virtually any material, fills or seals cracks and rebuild worn surfaces. Built-in plunger for easy dispensing without equipment. Working time is approximately four minutes.

Fixmaster Poxy Pak is a fast cure, general purpose epoxy that bonds virtually any material, fills or seals cracks and rebuild worn surfaces. Built-in plunger for easy dispensing without equipment. Working time is approximately four minutes.

This E-05MR epoxy adhesive is clear and comes in a dual-cartridge. It meets the standards for ASTM D792, ISO 11359-2, ISO 13445, ISO 4587, ISO 527-3, ISO 868, ISO 9653. This epoxy adhesive features high strength on a wide range of substrates, impact resistant and includes resin and hardener. In addition, it has a working time of five minutes and has a tensile strength of 7,240 psi.

This E-05MR epoxy adhesive is clear and comes in a dual-cartridge. It meets the standards for ASTM D792, ISO 11359-2, ISO 13445, ISO 4587, ISO 527-3, ISO 868, ISO 9653. This epoxy adhesive features high strength on a wide range of substrates, impact resistant and includes resin and hardener. In addition, it has a working time of five minutes and has a tensile strength of 7,240 psi.

This amber, 200-millilitre dual-cartridge E-120HP Hysol epoxy adhesive is a non-sag aerospace-grade epoxy with an extended open time to allow for adjustment. With a two-hour functional cure and 24-hour full cure, this adhesive has a mixing ratio of 2:1, and a shear strength of 4300 PSI.

This amber, 200-millilitre dual-cartridge E-120HP Hysol epoxy adhesive is a non-sag aerospace-grade epoxy with an extended open time to allow for adjustment. With a two-hour functional cure and 24-hour full cure, this adhesive has a mixing ratio of 2:1, and a shear strength of 4300 PSI.

This PC 7255 epoxy adhesive is green and comes in a dual-cartridge. It meets the standards for ISO 604. This epoxy adhesive features corrosion resistant, easy to use, low friction, sprayable and includes resin and hardener. In addition, it is for use with chutes, heat exchanges and condensers, lining tanks, pipes, resurfacing and repairing rudders and pintel housings, it has a working time of 4 hour and has a tensile strength of 6815 psi.

This PC 7255 epoxy adhesive is green and comes in a dual-cartridge. It meets the standards for ISO 604. This epoxy adhesive features corrosion resistant, easy to use, low friction, sprayable and includes resin and hardener. In addition, it is for use with chutes, heat exchanges and condensers, lining tanks, pipes, resurfacing and repairing rudders and pintel housings, it has a working time of 4 hour and has a tensile strength of 6815 psi.

This dual-cartridge PC7255 epoxy adhesive is for use on metal, has a shear strength of PSI 4500, and is available in a 900-millilitre tube. With a three-hour functional cure and four-hour full cure, this adhesive has grey epoxy, a maximum temperature of 230℉, 2.7 square foot coverage, and a mixing ratio of 2:1.

This dual-cartridge PC7255 epoxy adhesive is for use on metal, has a shear strength of PSI 4500, and is available in a 900-millilitre tube. With a three-hour functional cure and four-hour full cure, this adhesive has grey epoxy, a maximum temperature of 230℉, 2.7 square foot coverage, and a mixing ratio of 2:1.

This HY 4080 acrylic adhesive is grey and comes in a cartridge. It meets the standards for ISO 4587. This acrylic adhesive features excellent impact resistance, fast fixture at room temperature, good resistance to peel and impact loads, high viscosity, suited to wide variety of substrates and includes resin and hardener. In addition, it has a working time of 10 minutes and has a tensile strength of 1639 psi.

This HY 4080 acrylic adhesive is grey and comes in a cartridge. It meets the standards for ISO 4587. This acrylic adhesive features excellent impact resistance, fast fixture at room temperature, good resistance to peel and impact loads, high viscosity, suited to wide variety of substrates and includes resin and hardener. In addition, it has a working time of 10 minutes and has a tensile strength of 1639 psi.

Made with methacrylate ester, this two-part epoxy has a cure time of 720 seconds. The epoxy comes in a 490-millilitre, dual cartridge design and dries green.

Made with methacrylate ester, this two-part epoxy has a cure time of 720 seconds. The epoxy comes in a 490-millilitre, dual cartridge design and dries green.

This HY 4080 acrylic adhesive is grey. It meets the standards for ISO 4587. This acrylic adhesive features excellent impact resistance, fast fixture at room temperature, good resistance to peel and impact loads, high viscosity, suited to wide variety of substrates and includes resin and hardener. In addition, it has a working time of 10 minutes and has a tensile strength of 1639 psi.

This HY 4080 acrylic adhesive is grey. It meets the standards for ISO 4587. This acrylic adhesive features excellent impact resistance, fast fixture at room temperature, good resistance to peel and impact loads, high viscosity, suited to wide variety of substrates and includes resin and hardener. In addition, it has a working time of 10 minutes and has a tensile strength of 1639 psi.

Epoxy structural adhesives, often referred to as "epoxies," provide the highest bonding strength for most materials compared to other structural adhesives like acrylic and urethane. They are used in building, home construction, and manufacturing because of their durability and resistance to chemicals, high heat, and weathering.

Epoxy structural adhesives, often referred to as "epoxies," provide the highest bonding strength for most materials compared to other structural adhesives like acrylic and urethane. They are used in building, home construction, and manufacturing because of their durability and resistance to chemicals, high heat, and weathering.

This EA 445 epoxy adhesive is grey and comes in a cup. It meets the standards for NSF. This epoxy adhesive features bonds virtually any material, repair, fill and seal holes, cracks and worn surfaces, may be drilled, tapped, sanded, or machined and painted after cure and includes resin and hardener. In addition, it has a working time of five minutes and has a tensile strength of 3,815 psi.

This EA 445 epoxy adhesive is grey and comes in a cup. It meets the standards for NSF. This epoxy adhesive features bonds virtually any material, repair, fill and seal holes, cracks and worn surfaces, may be drilled, tapped, sanded, or machined and painted after cure and includes resin and hardener. In addition, it has a working time of five minutes and has a tensile strength of 3,815 psi.

This E-90FL epoxy adhesive is grey and comes in a dual-cartridge. It meets the standards for ISO 13445, ISO 4587, ISO 527-2, ISO 868. This epoxy adhesive features electrically insulating, industrial grade, medium viscosity and includes resin and hardener. In addition, it has a working time of 90 minutes and has a tensile strength of 1,900 psi. It is not water-resistant.

This E-90FL epoxy adhesive is grey and comes in a dual-cartridge. It meets the standards for ISO 13445, ISO 4587, ISO 527-2, ISO 868. This epoxy adhesive features electrically insulating, industrial grade, medium viscosity and includes resin and hardener. In addition, it has a working time of 90 minutes and has a tensile strength of 1,900 psi. It is not water-resistant.

This 9490 epoxy adhesive is white and comes in a stick. It meets the standards for ASTM and ISO.. This epoxy adhesive features bonds virtually any material, cures under water and will adhere to most damp surfaces, repair, fill and seal holes, cracks and worn surfaces, may be drilled, tapped, sanded, machined and painted and includes resin and hardener. In addition, it has a working time of 15 minutes and has a tensile strength of 1,225 psi.

This 9490 epoxy adhesive is white and comes in a stick. It meets the standards for ASTM and ISO.. This epoxy adhesive features bonds virtually any material, cures under water and will adhere to most damp surfaces, repair, fill and seal holes, cracks and worn surfaces, may be drilled, tapped, sanded, machined and painted and includes resin and hardener. In addition, it has a working time of 15 minutes and has a tensile strength of 1,225 psi.

This E-30CL epoxy adhesive is clear and comes in a dual-cartridge. It meets the standards for ASTM E1640, ISO 11359-2, ISO 1675, ISO 4587, ISO 527-2, ISO 868. This epoxy adhesive features impact resistant, mechanical and electrical insulating properties, optical clarity and includes resin and hardener. In addition, it is for use with manufacturer's number983438, 983439, it has a working time of 30 minutes and has a tensile strength of 8,000 psi.

This E-30CL epoxy adhesive is clear and comes in a dual-cartridge. It meets the standards for ASTM E1640, ISO 11359-2, ISO 1675, ISO 4587, ISO 527-2, ISO 868. This epoxy adhesive features impact resistant, mechanical and electrical insulating properties, optical clarity and includes resin and hardener. In addition, it is for use with manufacturer's number983438, 983439, it has a working time of 30 minutes and has a tensile strength of 8,000 psi.

Epoxy structural adhesives, often referred to as "epoxies," provide the highest bonding strength for most materials compared to other structural adhesives like acrylic and urethane. They are used in building, home construction, and manufacturing because of their durability and resistance to chemicals, high heat, and weathering.

Epoxy structural adhesives, often referred to as "epoxies," provide the highest bonding strength for most materials compared to other structural adhesives like acrylic and urethane. They are used in building, home construction, and manufacturing because of their durability and resistance to chemicals, high heat, and weathering.

This EA E-20HP epoxy adhesive is white and comes in a pail. This epoxy adhesive features high peel, high shear, high strength epoxy with a 20-minute work life, toughened and includes resin only. In addition, it has a working time of 20 minutes.

This EA E-20HP epoxy adhesive is white and comes in a pail. This epoxy adhesive features high peel, high shear, high strength epoxy with a 20-minute work life, toughened and includes resin only. In addition, it has a working time of 20 minutes.

This EA E-20HP epoxy adhesive comes in a cartridge. It meets the standards for RoHS. This epoxy adhesive is designed for a wide variety of substrates, plus it has high impact resistance and high humidity resistance.

This EA E-20HP epoxy adhesive comes in a cartridge. It meets the standards for RoHS. This epoxy adhesive is designed for a wide variety of substrates, plus it has high impact resistance and high humidity resistance.