Product ITEM is unavailable. See products from the same category below.
Circular Saw Blades
Circular saw blades are used with circular saws, mitre and chop saws, table saws, and concrete and masonry saws. They have teeth that cut through material and grooves to help limit vibration and disperse heat caused by friction that can cause overheating and damage the blade. Blades are designed for use with a specific material, such as wood or metal. Generally, larger blades are used for industrial applications and smaller blades are used in circular saws and other handheld tools.
This finishing circular saw blade is 10 inches in diameter and 1.05 inches plate thickness. It has 7000 maximum revolutions per minute, a carbide tip, 18 Degrees hook angle, and a ⅝ inch round arbour. The blade has 60 teeth and an alternate top bevel tooth grind. It is suitable for use in cutting wood of 0.095 inch width and four inches depth.
This finishing circular saw blade is 10 inches in diameter and 1.05 inches plate thickness. It has 7000 maximum revolutions per minute, a carbide tip, 18 Degrees hook angle, and a ⅝ inch round arbour. The blade has 60 teeth and an alternate top bevel tooth grind. It is suitable for use in cutting wood of 0.095 inch width and four inches depth.
This framing circular saw blade has a 7¼-inch diameter with 0.069 inch thin kerf thickness. It has a cobalt infused tungsten carbide tip and a ⅝ inch round arbour. The blade with 24 teeth has 18 Degrees hook angle and an alternate top bevel tooth grind. It cuts wood, softwood, hardwood, wet lumber, treated lumber, and laminated wood.
This framing circular saw blade has a 7¼-inch diameter with 0.069 inch thin kerf thickness. It has a cobalt infused tungsten carbide tip and a ⅝ inch round arbour. The blade with 24 teeth has 18 Degrees hook angle and an alternate top bevel tooth grind. It cuts wood, softwood, hardwood, wet lumber, treated lumber, and laminated wood.
This circular saw blade has a ground tungsten carbide tip and 7¼ inches diameter. It has 24 teeth with 20 Degrees hook angle and alternate top bevel tooth grind. The general-purpose blade cuts wood, softwood, hardwood, wet lumber, treated lumber, and laminated wood of 0.063 inch width.
This circular saw blade has a ground tungsten carbide tip and 7¼ inches diameter. It has 24 teeth with 20 Degrees hook angle and alternate top bevel tooth grind. The general-purpose blade cuts wood, softwood, hardwood, wet lumber, treated lumber, and laminated wood of 0.063 inch width.
This circular saw blade has a 12-inch diameter and 1.05 inches plate thickness. It has 6000 maximum revolutions per minute, a carbide tip, 12 Degrees hook angle, and a one inch round arbour. The finishing blade has 80 teeth and an alternate top bevel tooth grind. It is suitable for use in cutting hard/softwoods with 0.118 inch width and four inches depth.
This circular saw blade has a 12-inch diameter and 1.05 inches plate thickness. It has 6000 maximum revolutions per minute, a carbide tip, 12 Degrees hook angle, and a one inch round arbour. The finishing blade has 80 teeth and an alternate top bevel tooth grind. It is suitable for use in cutting hard/softwoods with 0.118 inch width and four inches depth.
This finishing circular saw blade has a 7¼-inch diameter with 0.063 inch thin kerf thickness. It has a cobalt infused tungsten carbide tip and a ⅝ inch round arbour. The thin blade has 40 teeth and an alternate top bevel tooth grind. It cuts softwood, hardwood, melamine, MDF, veneered plywood, wet lumber, treated lumber, and laminated wood.
This finishing circular saw blade has a 7¼-inch diameter with 0.063 inch thin kerf thickness. It has a cobalt infused tungsten carbide tip and a ⅝ inch round arbour. The thin blade has 40 teeth and an alternate top bevel tooth grind. It cuts softwood, hardwood, melamine, MDF, veneered plywood, wet lumber, treated lumber, and laminated wood.
This dry metal-cutting circular saw blade is 14 inches in diameter with a 0.087 inch kerf thickness and a maximum speed of 1800 RPM. It is made of hardened steel with a carbide tip and has a one inch round arbour. The blade with 72 teeth has a zero Degrees hook angle and an ATB tooth grind. It is suitable for metal/stainless steel.
This dry metal-cutting circular saw blade is 14 inches in diameter with a 0.087 inch kerf thickness and a maximum speed of 1800 RPM. It is made of hardened steel with a carbide tip and has a one inch round arbour. The blade with 72 teeth has a zero Degrees hook angle and an ATB tooth grind. It is suitable for metal/stainless steel.
This metal-cutting circular saw blade has a 7¼-inch diameter with a 0.050 inch plate thickness and a maximum speed of 6300 revolutions per minute. It has a carbide tip and a ⅝ inch round arbour. The blade with 56 teeth has a -6 Degrees hook angle and an ATB tooth grind. It is suitable for aluminum and cuts up to 0.079 inch width.
This metal-cutting circular saw blade has a 7¼-inch diameter with a 0.050 inch plate thickness and a maximum speed of 6300 revolutions per minute. It has a carbide tip and a ⅝ inch round arbour. The blade with 56 teeth has a -6 Degrees hook angle and an ATB tooth grind. It is suitable for aluminum and cuts up to 0.079 inch width.
This metal-cutting circular saw blade has a 5 ⅞ inches diameter with a 0.050 inch plate thickness and a maximum speed of 4500 revolutions per minute. It has a carbide tip and a 25/32 inch round arbour. The blade with 50 teeth has a -5 Degrees hook angle and an ATB tooth grind. It is suitable for aluminum and cuts up to 0.071 inch width.
This metal-cutting circular saw blade has a 5 ⅞ inches diameter with a 0.050 inch plate thickness and a maximum speed of 4500 revolutions per minute. It has a carbide tip and a 25/32 inch round arbour. The blade with 50 teeth has a -5 Degrees hook angle and an ATB tooth grind. It is suitable for aluminum and cuts up to 0.071 inch width.
This metal-cutting circular saw blade has a 6½-inch diameter with a 0.050 inch plate thickness and a maximum speed of 4500 revolutions per minute. It has a carbide tip and a ⅝ inch round arbour. The blade with 54 teeth has a -5 Degrees hook angle and an ATB tooth grind. It is suitable for aluminum and cuts up to 0.071 inch width.
This metal-cutting circular saw blade has a 6½-inch diameter with a 0.050 inch plate thickness and a maximum speed of 4500 revolutions per minute. It has a carbide tip and a ⅝ inch round arbour. The blade with 54 teeth has a -5 Degrees hook angle and an ATB tooth grind. It is suitable for aluminum and cuts up to 0.071 inch width.
This metal-cutting circular saw blade has a 6 ⅞ inches diameter with a 0.050 inch plate thickness and a standard blade speed. It has a carbide tip and a 25/32 inch round arbour. The blade with 36 teeth has a two Degrees hook angle and an ATB tooth grind. It is suitable for metals/stainless steel and cuts up to 0.188 inch width.
This metal-cutting circular saw blade has a 6 ⅞ inches diameter with a 0.050 inch plate thickness and a standard blade speed. It has a carbide tip and a 25/32 inch round arbour. The blade with 36 teeth has a two Degrees hook angle and an ATB tooth grind. It is suitable for metals/stainless steel and cuts up to 0.188 inch width.
This metal-cutting circular saw blade has a 7¼-inch diameter with a 0.050 inch plate thickness and a maximum speed of 6300 revolutions per minute. It has a carbide tip and a ⅝ inch round arbour. The blade with 48 teeth has a two Degrees hook angle and an ATB tooth grind. It is suitable for metals and cuts up to 0.188 inch width.
This metal-cutting circular saw blade has a 7¼-inch diameter with a 0.050 inch plate thickness and a maximum speed of 6300 revolutions per minute. It has a carbide tip and a ⅝ inch round arbour. The blade with 48 teeth has a two Degrees hook angle and an ATB tooth grind. It is suitable for metals and cuts up to 0.188 inch width.
This circular saw blade has a 10 inches diameter, 0.050 inches plate thickness and 0.188 inch blade thickness. It has 3000 maximum revolutions per minute, a carbide tip, zero Degrees hook angle, and a ⅝ inch round arbour. The blade has 50 teeth and an ATB tooth grind. It is suitable for cutting non-ferrous/ferrous/thick metals of 0.079 inch width.
This circular saw blade has a 10 inches diameter, 0.050 inches plate thickness and 0.188 inch blade thickness. It has 3000 maximum revolutions per minute, a carbide tip, zero Degrees hook angle, and a ⅝ inch round arbour. The blade has 50 teeth and an ATB tooth grind. It is suitable for cutting non-ferrous/ferrous/thick metals of 0.079 inch width.
This circular saw blade has a 7¼-inch diameter, 0.050 inches plate thickness and 0.094 inch blade thickness. It has 6300 maximum revolutions per minute, a carbide tip, a -5 Degrees hook angle, and a ⅝ inch round arbour. The blade has 70 teeth and an ATB tooth grind. It is suitable for cutting non-ferrous/ferrous/thin metals of 0.071 inch width.
This circular saw blade has a 7¼-inch diameter, 0.050 inches plate thickness and 0.094 inch blade thickness. It has 6300 maximum revolutions per minute, a carbide tip, a -5 Degrees hook angle, and a ⅝ inch round arbour. The blade has 70 teeth and an ATB tooth grind. It is suitable for cutting non-ferrous/ferrous/thin metals of 0.071 inch width.
This metal-cutting circular saw blade has an eight-inch diameter with a 0.050 inch plate thickness and a maximum speed of 5000 revolutions per minute. It has a carbide tip and a ⅝ inch round arbour. The blade with 58 teeth has a -6 Degrees hook angle and an ATB tooth grind. It is suitable for aluminum and cuts up to 0.094 inch width.
This metal-cutting circular saw blade has an eight-inch diameter with a 0.050 inch plate thickness and a maximum speed of 5000 revolutions per minute. It has a carbide tip and a ⅝ inch round arbour. The blade with 58 teeth has a -6 Degrees hook angle and an ATB tooth grind. It is suitable for aluminum and cuts up to 0.094 inch width.
This metal-cutting circular saw blade has a 12-inch diameter with a 0.050 inch plate thickness and a standard blade speed. It has a carbide tip and a one inch round arbour. The blade with 80 teeth has a -6 Degrees hook angle and an ATB tooth grind. It is suitable for aluminum and cuts up to 0.118 inch width.
This metal-cutting circular saw blade has a 12-inch diameter with a 0.050 inch plate thickness and a standard blade speed. It has a carbide tip and a one inch round arbour. The blade with 80 teeth has a -6 Degrees hook angle and an ATB tooth grind. It is suitable for aluminum and cuts up to 0.118 inch width.
This metal-cutting circular saw blade has a 5 ⅞ inches diameter with a 0.050 inch plate thickness and a speed of 4500 RPM. It has a carbide tip and a 25/32 inch round arbour. The blade with 34 teeth has a two Degrees hook angle and an ATB tooth grind. It is suitable for cutting ferrous/non-ferrous metals and cuts up to 0.188 inch width.
This metal-cutting circular saw blade has a 5 ⅞ inches diameter with a 0.050 inch plate thickness and a speed of 4500 RPM. It has a carbide tip and a 25/32 inch round arbour. The blade with 34 teeth has a two Degrees hook angle and an ATB tooth grind. It is suitable for cutting ferrous/non-ferrous metals and cuts up to 0.188 inch width.
To view Availability for another location, please enter postal code below
Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order.
