This refers to the maximum weight that the hardware is designed to lift under normal use. Working load limit (WLL) is 1/3 of the breaking strength of the lifting hardware. Working load limits must exceed the expected load.
Product ITEM is unavailable. See products from the same category below.
Turnbuckles
Turnbuckles adjust the length and tension of rope and cable. They have two threaded, end fittings that screw in and out of the turnbuckle to make adjustments. Turnbuckles connect with rigging assemblies in applications like fences, communication towers, utility poles, tree care, and construction.
This nut eye is a model G-400 and has a 1/2'' thread size. it is tapped with standard UNC Class two thread after being galvanized. Its working load limit is 2,250 pounds and it is made of forged steel. It has a close length of 2.55 inches.
This nut eye is a model G-400 and has a 1/2'' thread size. it is tapped with standard UNC Class two thread after being galvanized. Its working load limit is 2,250 pounds and it is made of forged steel. It has a close length of 2.55 inches.
This nut eye is a model G-400 and has a 1 in thread size. it is tapped with standard UNC Class two thread after being galvanized. Its working load limit is 10,000 pounds and it is made of forged steel. It has a close length of 5.01 inches.
This nut eye is a model G-400 and has a 1 in thread size. it is tapped with standard UNC Class two thread after being galvanized. Its working load limit is 10,000 pounds and it is made of forged steel. It has a close length of 5.01 inches.
This turnbuckle is a jaw and jaw with a quenched and tempered end fitting. The turnbuckles are recommended for straight line or in-line pull only and their bodies are heat-treated by normalizing. This turnbuckle has a working load limit of 2,200 pounds and measures 1/2 x 12 inches. It is made of hot-dip galvanized steel and has a close length of 20.43 inches.
This turnbuckle is a jaw and jaw with a quenched and tempered end fitting. The turnbuckles are recommended for straight line or in-line pull only and their bodies are heat-treated by normalizing. This turnbuckle has a working load limit of 2,200 pounds and measures 1/2 x 12 inches. It is made of hot-dip galvanized steel and has a close length of 20.43 inches.
This shoulder nut eye bolt is galvanized. It measures 1/2 x 3 1/2 inches and has a working load limit of 2,600 pounds. It is made of forged steel and is furnished with standard hot-dip galvanized, heavy hex nuts. It has a close length of 5.12 inches.
This shoulder nut eye bolt is galvanized. It measures 1/2 x 3 1/2 inches and has a working load limit of 2,600 pounds. It is made of forged steel and is furnished with standard hot-dip galvanized, heavy hex nuts. It has a close length of 5.12 inches.
This nut eye is a model G-400 and has a 3/4'' thread size. it is tapped with standard UNC Class two thread after being galvanized. Its working load limit is 5,200 pounds and it is made of forged steel. It has a close length of 3.89 inches.
This nut eye is a model G-400 and has a 3/4'' thread size. it is tapped with standard UNC Class two thread after being galvanized. Its working load limit is 5,200 pounds and it is made of forged steel. It has a close length of 3.89 inches.
This turnbuckle is an eye and eye. The end fittings are quenched and tempered, and the bodies are heat-treated by normalizing. This turnbuckle has a working load of 800 pounds and measures 5/16 x 4 1/2 inches. It is made of hot-dip galvanized steel and has a close length of 9.98 inches.
This turnbuckle is an eye and eye. The end fittings are quenched and tempered, and the bodies are heat-treated by normalizing. This turnbuckle has a working load of 800 pounds and measures 5/16 x 4 1/2 inches. It is made of hot-dip galvanized steel and has a close length of 9.98 inches.
This nut eye is a model G-400 and has a 3/8'' thread size. it is tapped with standard UNC Class two thread after it has been galvanized. Its working load limit is 1,250 pounds and it is made of forged steel. It has a close length of 2.09 inches.
This nut eye is a model G-400 and has a 3/8'' thread size. it is tapped with standard UNC Class two thread after it has been galvanized. Its working load limit is 1,250 pounds and it is made of forged steel. It has a close length of 2.09 inches.
This nut eye is a model G-400 and has a 5/8'' thread size. it is tapped with standard UNC Class two thread after it has been galvanized. Its working load limit is 3,600 pounds and it is made of forged steel. It has a close length of 3.25 inches.
This nut eye is a model G-400 and has a 5/8'' thread size. it is tapped with standard UNC Class two thread after it has been galvanized. Its working load limit is 3,600 pounds and it is made of forged steel. It has a close length of 3.25 inches.
This turnbuckle is a jaw and jaw with a quenched and tempered end fitting. The turnbuckles are recommended for straight line or in-line pull only and their bodies are heat-treated by normalizing. This turnbuckle has a working load limit of 5,200 pounds and measures 3/4 x 12 inches. It is made of hot-dip galvanized steel and has a close length of 24.08 inches.
This turnbuckle is a jaw and jaw with a quenched and tempered end fitting. The turnbuckles are recommended for straight line or in-line pull only and their bodies are heat-treated by normalizing. This turnbuckle has a working load limit of 5,200 pounds and measures 3/4 x 12 inches. It is made of hot-dip galvanized steel and has a close length of 24.08 inches.
This shoulder nut eye bolt is galvanized. It measures 3/8 x 4 1/2 inches and has a working load limit of 1,550 pounds. It is made of forged steel and furnished with standard hot-dip galvanized, heavy hex nuts. It has a close length of 5.97 inches.
This shoulder nut eye bolt is galvanized. It measures 3/8 x 4 1/2 inches and has a working load limit of 1,550 pounds. It is made of forged steel and furnished with standard hot-dip galvanized, heavy hex nuts. It has a close length of 5.97 inches.
To view Availability for another location, please enter postal code below
Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order.
