TIG (tungsten inert gas) electrodes each insert into a compatible TIG torch that is connected to a TIG welder that supplies current to the electrode. An arc is created between the electrode and the workpiece, and the heat from the arc melts the workpiece material to create the weld. The type of electrode used depends on the base material and thickness of the workpiece, as well as the type of output current provided by the welder. Also known as gas tungsten arc welding (GTAW), TIG welding creates clean, precise welds and is ideal for welding thin materials and surfaces that will be visible. A complete TIG torch setup includes a nozzle, collet body or gas lens, collet, insulators, back cap, torch body, torch handle, and electrode.
This TIGrod ER80S-B6 TIG welding rod is made of low-alloy steel. In addition, it is for use with: low-alloy steel to low-alloy steel. It has an overall length of 36 inches, an overall diameter of 0.0938 inches, and weighs 10 pounds. It can be used for TIG, in positions including flat, horizontal, overhead, vertical-down, vertical-up and meets the standards for AWS A5.30.
This TIGrod ER80S-B6 TIG welding rod is made of low-alloy steel. In addition, it is for use with: low-alloy steel to low-alloy steel. It has an overall length of 36 inches, an overall diameter of 0.0938 inches, and weighs 10 pounds. It can be used for TIG, in positions including flat, horizontal, overhead, vertical-down, vertical-up and meets the standards for AWS A5.30.
This TIGrod ER90S-B3 TIG welding rod is made of low-alloy steel. In addition, it is designed for use with the following materials: low-alloy steel to low-alloy steel. It has an overall length of 36 inches, an overall diameter of 0.125 inch, and weighs 10 pounds. It can be used for TIG, in positions including flat, horizontal, overhead, vertical-down, vertical-up and meets the standards for AWS A5.28.
This TIGrod ER90S-B3 TIG welding rod is made of low-alloy steel. In addition, it is designed for use with the following materials: low-alloy steel to low-alloy steel. It has an overall length of 36 inches, an overall diameter of 0.125 inch, and weighs 10 pounds. It can be used for TIG, in positions including flat, horizontal, overhead, vertical-down, vertical-up and meets the standards for AWS A5.28.
This TIGrod ER80S-B2 TIG welding rod is made of low-alloy steel. In addition, it is designed for use with the following materials: low-alloy steel to low-alloy steel. It has an overall length of 36 inches, an overall diameter of 0.125 inch, and weighs 10 pounds. It can be used for TIG, in positions including flat, horizontal, overhead, vertical-down, vertical-up and meets the standards for AWS A5.28.
This TIGrod ER80S-B2 TIG welding rod is made of low-alloy steel. In addition, it is designed for use with the following materials: low-alloy steel to low-alloy steel. It has an overall length of 36 inches, an overall diameter of 0.125 inch, and weighs 10 pounds. It can be used for TIG, in positions including flat, horizontal, overhead, vertical-down, vertical-up and meets the standards for AWS A5.28.
This TIGrod ER80S-B2 TIG welding rod is made of low-alloy steel. In addition, it is for use with: low-alloy steel to low-alloy steel. It has an overall length of 36 inches, an overall diameter of 0.0938 inches, and weighs 10 pounds. It can be used for TIG, in positions including flat, horizontal, overhead, vertical-down, vertical-up and meets the standards for AWS A5.28.
This TIGrod ER80S-B2 TIG welding rod is made of low-alloy steel. In addition, it is for use with: low-alloy steel to low-alloy steel. It has an overall length of 36 inches, an overall diameter of 0.0938 inches, and weighs 10 pounds. It can be used for TIG, in positions including flat, horizontal, overhead, vertical-down, vertical-up and meets the standards for AWS A5.28.
This Spoolarc 83 TIGrod TIG welding rod is made of low-alloy steel. In addition, it is for use with: low-alloy steel to low-alloy steel. It has an overall length of 36 inches, an overall diameter of 0.0938 inches, and weighs 10 pounds. It can be used for TIG, in positions including flat, horizontal, overhead, vertical-down, vertical-up and meets the standards for AWS A5.23, AWS A5.28.
This Spoolarc 83 TIGrod TIG welding rod is made of low-alloy steel. In addition, it is for use with: low-alloy steel to low-alloy steel. It has an overall length of 36 inches, an overall diameter of 0.0938 inches, and weighs 10 pounds. It can be used for TIG, in positions including flat, horizontal, overhead, vertical-down, vertical-up and meets the standards for AWS A5.23, AWS A5.28.
This 36 x 1/8-inch low alloy TIG rod s used for industrial and general fabrication, mobile equipment, automotive, and ship/barge building. It comes in three tubes of 4.54 kilograms each.
This 36 x 1/8-inch low alloy TIG rod s used for industrial and general fabrication, mobile equipment, automotive, and ship/barge building. It comes in three tubes of 4.54 kilograms each.
This Spoolarc 86 TIGrod TIG welding rod is made of mild steel. In addition, it is for use with: carbon steel to carbon steel. It has an overall length of 36 inches, an overall diameter of 0.125 inch, and weighs 10 pounds. It can be used for TIG, in positions including flat, horizontal, overhead, vertical-down, vertical-up and meets the standards for AWS A5.17, AWS A5.18.
This Spoolarc 86 TIGrod TIG welding rod is made of mild steel. In addition, it is for use with: carbon steel to carbon steel. It has an overall length of 36 inches, an overall diameter of 0.125 inch, and weighs 10 pounds. It can be used for TIG, in positions including flat, horizontal, overhead, vertical-down, vertical-up and meets the standards for AWS A5.17, AWS A5.18.
This Arcaloy 316LF5-16 electrode is made of stainless steel. In addition, it is designed for use with the following materials: stainless steel. It has an overall length of 14 inches, an overall diameter of 1/8 inch, and weighs 10 pounds. It can be used for stick welding (SMAW), and meets the standards for ABS E316L-16, AWS A5.4 E316-16/E316L-16, CWB E316L-16, MIL MIL-316L-16, QPL.
This Arcaloy 316LF5-16 electrode is made of stainless steel. In addition, it is designed for use with the following materials: stainless steel. It has an overall length of 14 inches, an overall diameter of 1/8 inch, and weighs 10 pounds. It can be used for stick welding (SMAW), and meets the standards for ABS E316L-16, AWS A5.4 E316-16/E316L-16, CWB E316L-16, MIL MIL-316L-16, QPL.
This Spoolarc 86 TIGrod TIG welding rod is made of mild steel. In addition, it is for use with: carbon steel to carbon steel. It has an overall length of 36 inches, an overall diameter of 0.1563 inch, and weighs 10 pounds. It can be used for TIG, in positions including flat, horizontal, overhead, vertical-down, vertical-up and meets the standards for AWS A5.17, AWS A5.18.
This Spoolarc 86 TIGrod TIG welding rod is made of mild steel. In addition, it is for use with: carbon steel to carbon steel. It has an overall length of 36 inches, an overall diameter of 0.1563 inch, and weighs 10 pounds. It can be used for TIG, in positions including flat, horizontal, overhead, vertical-down, vertical-up and meets the standards for AWS A5.17, AWS A5.18.
This Spoolarc 86 TIGrod TIG welding rod is made of mild steel. In addition, it is for use with: carbon steel to carbon steel. It has an overall length of 36 inches, an overall diameter of 0.0938 inches, and weighs 10 pounds. It can be used for TIG, in positions including flat, horizontal, overhead, vertical-down, vertical-up and meets the standards for AWS A5.17, AWS A5.18.
This Spoolarc 86 TIGrod TIG welding rod is made of mild steel. In addition, it is for use with: carbon steel to carbon steel. It has an overall length of 36 inches, an overall diameter of 0.0938 inches, and weighs 10 pounds. It can be used for TIG, in positions including flat, horizontal, overhead, vertical-down, vertical-up and meets the standards for AWS A5.17, AWS A5.18.
This Spoolarc 86 TIGrod TIG welding rod is made of mild steel. In addition, it is for use with: carbon steel to carbon steel. It has an overall length of 36 inches, an overall diameter of 0.0625 inch, and weighs 10 pounds. It can be used for TIG, in positions including flat, horizontal, overhead, vertical-down, vertical-up and meets the standards for AWS A5.17, AWS A5.18.
This Spoolarc 86 TIGrod TIG welding rod is made of mild steel. In addition, it is for use with: carbon steel to carbon steel. It has an overall length of 36 inches, an overall diameter of 0.0625 inch, and weighs 10 pounds. It can be used for TIG, in positions including flat, horizontal, overhead, vertical-down, vertical-up and meets the standards for AWS A5.17, AWS A5.18.
To view Availability for another location, please enter postal code below
Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order.
