TIG (tungsten inert gas) electrodes each insert into a compatible TIG torch that is connected to a TIG welder that supplies current to the electrode. An arc is created between the electrode and the workpiece, and the heat from the arc melts the workpiece material to create the weld. The type of electrode used depends on the base material and thickness of the workpiece, as well as the type of output current provided by the welder. Also known as gas tungsten arc welding (GTAW), TIG welding creates clean, precise welds and is ideal for welding thin materials and surfaces that will be visible. A complete TIG torch setup includes a nozzle, collet body or gas lens, collet, insulators, back cap, torch body, torch handle, and electrode.
This tungsten electrode features similar characteristics to 1½% lanthanated with better arc Starting, arc stability and less tip erosion, substitute for 2% thoriated. In addition, it is for use with: aluminum, carbon steel, copper, low-alloy steel, magnesium, nickel, stainless steel, titanium. It has an overall length of seven inches, an overall diameter of 0.09375 inches. It can be used for TIG welding and meets the standards for AWS A5.12, ISO 6848.
This tungsten electrode features similar characteristics to 1½% lanthanated with better arc Starting, arc stability and less tip erosion, substitute for 2% thoriated. In addition, it is for use with: aluminum, carbon steel, copper, low-alloy steel, magnesium, nickel, stainless steel, titanium. It has an overall length of seven inches, an overall diameter of 0.09375 inches. It can be used for TIG welding and meets the standards for AWS A5.12, ISO 6848.
Precision centerless ground tungsten electrodes for TIG (GTAW) welding. Pure tungsten is economical, typically used for general purpose on AC with high frequency.
Precision centerless ground tungsten electrodes for TIG (GTAW) welding. Pure tungsten is economical, typically used for general purpose on AC with high frequency.
This H-12 TIG welding rod is made of tool steel. In addition, it is designed for use with the following materials: tool steel. It has an overall length of 36 inches, an overall diameter of 0.0625 inch, and weighs five pounds. It can be used for TIG, in positions including flat, horizontal, overhead, vertical-down, vertical-up.
This H-12 TIG welding rod is made of tool steel. In addition, it is designed for use with the following materials: tool steel. It has an overall length of 36 inches, an overall diameter of 0.0625 inch, and weighs five pounds. It can be used for TIG, in positions including flat, horizontal, overhead, vertical-down, vertical-up.
This Spoolarc 86 TIGrod TIG welding rod is made of mild steel. In addition, it is for use with: carbon steel to carbon steel. It has an overall length of 36 inches, an overall diameter of 0.0625 inch, and weighs 10 pounds. It can be used for TIG, in positions including flat, horizontal, overhead, vertical-down, vertical-up and meets the standards for AWS A5.17, AWS A5.18.
This Spoolarc 86 TIGrod TIG welding rod is made of mild steel. In addition, it is for use with: carbon steel to carbon steel. It has an overall length of 36 inches, an overall diameter of 0.0625 inch, and weighs 10 pounds. It can be used for TIG, in positions including flat, horizontal, overhead, vertical-down, vertical-up and meets the standards for AWS A5.17, AWS A5.18.
Precision centerless ground tungsten electrodes for TIG (GTAW) welding. Pure tungsten is economical, typically used for general purpose on AC with high frequency.
Precision centerless ground tungsten electrodes for TIG (GTAW) welding. Pure tungsten is economical, typically used for general purpose on AC with high frequency.
This tungsten electrode features performs well in dc welding and arc Starting at low-current settings. In addition, it is for use with: aluminum, carbon steel, copper, low-alloy steel, magnesium, nickel, stainless steel, titanium. It has an overall length of seven inches, an overall diameter of 0.09375 inches. It can be used for TIG welding and meets the standards for AWS A5.12, ISO 6848.
This tungsten electrode features performs well in dc welding and arc Starting at low-current settings. In addition, it is for use with: aluminum, carbon steel, copper, low-alloy steel, magnesium, nickel, stainless steel, titanium. It has an overall length of seven inches, an overall diameter of 0.09375 inches. It can be used for TIG welding and meets the standards for AWS A5.12, ISO 6848.
This tungsten electrode features similar characteristics to 1½% lanthanated with better arc Starting, arc stability and less tip erosion, substitute for 2% thoriated. In addition, it is for use with: aluminum, carbon steel, copper, low-alloy steel, magnesium, nickel, stainless steel, titanium. It has an overall length of seven inches, an overall diameter of 1/8 inch. It can be used for TIG welding and meets the standards for AWS A5.12, ISO 6848.
This tungsten electrode features similar characteristics to 1½% lanthanated with better arc Starting, arc stability and less tip erosion, substitute for 2% thoriated. In addition, it is for use with: aluminum, carbon steel, copper, low-alloy steel, magnesium, nickel, stainless steel, titanium. It has an overall length of seven inches, an overall diameter of 1/8 inch. It can be used for TIG welding and meets the standards for AWS A5.12, ISO 6848.
This tungsten electrode features forms a clean, balled end when heated, provides good arc stability for ac welding with a balanced or unbalanced squarewave or sine wave. In addition, it is for use with: aluminum, magnesium. It has an overall length of seven inches, an overall diameter of 3/32 inches. It can be used for TIG welding and meets the standards for AWS A5.12, ISO 6848.
This tungsten electrode features forms a clean, balled end when heated, provides good arc stability for ac welding with a balanced or unbalanced squarewave or sine wave. In addition, it is for use with: aluminum, magnesium. It has an overall length of seven inches, an overall diameter of 3/32 inches. It can be used for TIG welding and meets the standards for AWS A5.12, ISO 6848.
Precision centerless ground tungsten electrodes for TIG (GTAW) welding. 2% ceriated tungsten electrodes are non-radioactive, easier to start than pure tungsten. Electrodes can be used on AC or DC in either polarity.
Precision centerless ground tungsten electrodes for TIG (GTAW) welding. 2% ceriated tungsten electrodes are non-radioactive, easier to start than pure tungsten. Electrodes can be used on AC or DC in either polarity.
This tungsten electrode is designed for use with the following materials: aluminum, carbon steel, copper, low-alloy steel, magnesium, nickel, stainless steel, titanium. It has an overall length of seven inches, an overall diameter of 3/32 inches. It can be used for TIG welding and meets the standards for AWS A5.12.
This tungsten electrode is designed for use with the following materials: aluminum, carbon steel, copper, low-alloy steel, magnesium, nickel, stainless steel, titanium. It has an overall length of seven inches, an overall diameter of 3/32 inches. It can be used for TIG welding and meets the standards for AWS A5.12.
This 36 x 1/8-inch low alloy TIG rod s used for industrial and general fabrication, mobile equipment, automotive, and ship/barge building. It comes in three tubes of 4.54 kilograms each.
This 36 x 1/8-inch low alloy TIG rod s used for industrial and general fabrication, mobile equipment, automotive, and ship/barge building. It comes in three tubes of 4.54 kilograms each.
This tungsten electrode features similar characteristics to 1½% lanthanated with better arc Starting, arc stability and less tip erosion, substitute for 2% thoriated. In addition, it is for use with: aluminum, carbon steel, copper, low-alloy steel, magnesium, nickel, stainless steel, titanium. It has an overall length of seven inches, an overall diameter of 0.04 inches. It can be used for TIG welding and meets the standards for AWS A5.12, ISO 6848.
This tungsten electrode features similar characteristics to 1½% lanthanated with better arc Starting, arc stability and less tip erosion, substitute for 2% thoriated. In addition, it is for use with: aluminum, carbon steel, copper, low-alloy steel, magnesium, nickel, stainless steel, titanium. It has an overall length of seven inches, an overall diameter of 0.04 inches. It can be used for TIG welding and meets the standards for AWS A5.12, ISO 6848.
This tungsten electrode features performs well in dc welding and arc Starting at low-current settings. In addition, it is for use with: aluminum, carbon steel, copper, low-alloy steel, magnesium, nickel, stainless steel, titanium. It has an overall length of seven inches, an overall diameter of 0.0625 inches. It can be used for TIG welding and meets the standards for AWS A5.12, ISO 6848.
This tungsten electrode features performs well in dc welding and arc Starting at low-current settings. In addition, it is for use with: aluminum, carbon steel, copper, low-alloy steel, magnesium, nickel, stainless steel, titanium. It has an overall length of seven inches, an overall diameter of 0.0625 inches. It can be used for TIG welding and meets the standards for AWS A5.12, ISO 6848.
To view Availability for another location, please enter postal code below
Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order.