Stainless Steel Stick Welding Electrodes

This Sureweld 308L stick electrode is made of stainless steel. In addition, it is for use with: stainless steel to stainless steel. It has an overall length of 14 inches, an overall diameter of 3/32 inches, and weighs five pounds. It can be used for stick welding (SMAW), in positions including flat, horizontal, vertical-down, vertical-up and meets the standards for AWS A5.4.

This Sureweld 308L stick electrode is made of stainless steel. In addition, it is for use with: stainless steel to stainless steel. It has an overall length of 14 inches, an overall diameter of 3/32 inches, and weighs five pounds. It can be used for stick welding (SMAW), in positions including flat, horizontal, vertical-down, vertical-up and meets the standards for AWS A5.4.

This Atom Arc T steel electrode is AC-DCEP (electrode positive) and is used for welding T-1 steel in all applications. It measures 14 inches in length with a 3/16-inch diameter, and meets CSA W48 standards.

This Atom Arc T steel electrode is AC-DCEP (electrode positive) and is used for welding T-1 steel in all applications. It measures 14 inches in length with a 3/16-inch diameter, and meets CSA W48 standards.

This OK 55.00 low-hydrogen, all-position, basic electrode is suitable for critical applications requiring exceptional impacts at low temperatures, and provides a smooth, stable arc with very low spatter. It is AC-DCEP (electrode positive), made of steel, and measures 14 inches in length with a 3/32-inch diameter. Available in a 4.1-kilogram package.

This OK 55.00 low-hydrogen, all-position, basic electrode is suitable for critical applications requiring exceptional impacts at low temperatures, and provides a smooth, stable arc with very low spatter. It is AC-DCEP (electrode positive), made of steel, and measures 14 inches in length with a 3/32-inch diameter. Available in a 4.1-kilogram package.

This OK 61.30 electrode has an extra-low carbon, stainless steel design for welding 19 Cr 10 Ni-type steels and is suitable for welding stabilized stainless steels of similar composition, except when full creep resistance of the base material is to be met. It has a DC+ and AC polarity, a minimum tensile strength of 82,700 PSI, and measures 1/8 inch in diameter. Available in a 4.1-kilogram package.

This OK 61.30 electrode has an extra-low carbon, stainless steel design for welding 19 Cr 10 Ni-type steels and is suitable for welding stabilized stainless steels of similar composition, except when full creep resistance of the base material is to be met. It has a DC+ and AC polarity, a minimum tensile strength of 82,700 PSI, and measures 1/8 inch in diameter. Available in a 4.1-kilogram package.

This Atom Arc 8018 electrode is AC-DCEP (electrode positive) and used to weld high-tensile steels in the 70 to 80 ksi (483 to 553 MPa) tensile strength range. It measures 14 inches in length with a 5/32-inch diameter, and meets CSA W48 standards.

This Atom Arc 8018 electrode is AC-DCEP (electrode positive) and used to weld high-tensile steels in the 70 to 80 ksi (483 to 553 MPa) tensile strength range. It measures 14 inches in length with a 5/32-inch diameter, and meets CSA W48 standards.

Atom Arc 9018 low alloy electrodes for attachment welds on T1, HY-80, and HY-90 steels, and other high-tensile, quenched and tempered steels. AC-DCEP (electrode positive). AWS/ASME SFA 5.5, Class E9018-M. MIL-E-0022200/1, MIL-9018-M.

Atom Arc 9018 low alloy electrodes for attachment welds on T1, HY-80, and HY-90 steels, and other high-tensile, quenched and tempered steels. AC-DCEP (electrode positive). AWS/ASME SFA 5.5, Class E9018-M. MIL-E-0022200/1, MIL-9018-M.

Measuring 14 inches long, with a 1/8 inch diameter, this stick electrode has a tensile strength of 124,000 psi. It is made of stainless steel, and the container size is 3.75 pounds, with an AWS classification E2209-17.

Measuring 14 inches long, with a 1/8 inch diameter, this stick electrode has a tensile strength of 124,000 psi. It is made of stainless steel, and the container size is 3.75 pounds, with an AWS classification E2209-17.

This Atom Arc T steel electrode is AC-DCEP (electrode positive) and is used for welding T-1 steel in all applications. It measures 14 inches in length with a 3/32-inch diameter, and meets CSA W48 standards.

This Atom Arc T steel electrode is AC-DCEP (electrode positive) and is used for welding T-1 steel in all applications. It measures 14 inches in length with a 3/32-inch diameter, and meets CSA W48 standards.

This Atom Arc 10018-MM electrode is designed for use with the following materials: low-alloy, high-tensile steel. It has an overall length of 14 inches, an overall diameter of 1/8 inch, and weighs 50 pounds. It meets the standards for ASME SFA 5.5 E10018-D2 H4R.

This Atom Arc 10018-MM electrode is designed for use with the following materials: low-alloy, high-tensile steel. It has an overall length of 14 inches, an overall diameter of 1/8 inch, and weighs 50 pounds. It meets the standards for ASME SFA 5.5 E10018-D2 H4R.

This OK 67.70 electrode has an over-alloyed, stainless steel design and is for use as a buffer layer in welding acid-resistant clad steels and stainless steels to other types of steel. It has outstanding weld properties on both AC and DC+ current, and can be used in all positions except vertical down. It is 17 inches long with a 3/32-inch diameter, and has a minimum tensile strength of 88,500 PSI. Meets CSA W48 standards. Available in a 1.7-kilogram package.

This OK 67.70 electrode has an over-alloyed, stainless steel design and is for use as a buffer layer in welding acid-resistant clad steels and stainless steels to other types of steel. It has outstanding weld properties on both AC and DC+ current, and can be used in all positions except vertical down. It is 17 inches long with a 3/32-inch diameter, and has a minimum tensile strength of 88,500 PSI. Meets CSA W48 standards. Available in a 1.7-kilogram package.

This OK 67.60 extra-low carbon stainless steel electrode is suitable for welding stainless steel to mild and low alloyed steels, and welding transition layers when surfacing mild steel with stainless steel weld metal. It has a DC+ and AC polarity with a minimum tensile strength of 68,100 PSI, and measures 3/16 inch in diameter. Available in a 1.8-kilogram package.

This OK 67.60 extra-low carbon stainless steel electrode is suitable for welding stainless steel to mild and low alloyed steels, and welding transition layers when surfacing mild steel with stainless steel weld metal. It has a DC+ and AC polarity with a minimum tensile strength of 68,100 PSI, and measures 3/16 inch in diameter. Available in a 1.8-kilogram package.

This OK 67.70 electrode has an over-alloyed, stainless steel design and is for use as a buffer layer in welding acid-resistant clad steels and stainless steels to other types of steel. It has outstanding weld properties on both AC and DC+ current, and can be used in all positions except vertical down. It is 17 inches long with a 5/32-inch diameter, and has a minimum tensile strength of 88,500 PSI. Meets CSA W48 standards. Available in a 4.4-kilogram package.

This OK 67.70 electrode has an over-alloyed, stainless steel design and is for use as a buffer layer in welding acid-resistant clad steels and stainless steels to other types of steel. It has outstanding weld properties on both AC and DC+ current, and can be used in all positions except vertical down. It is 17 inches long with a 5/32-inch diameter, and has a minimum tensile strength of 88,500 PSI. Meets CSA W48 standards. Available in a 4.4-kilogram package.

This E385 welding rod measures 16 inches in length with a 2.5-millimetre diameter, and is available in a 0.6-kilogram package.

This E385 welding rod measures 16 inches in length with a 2.5-millimetre diameter, and is available in a 0.6-kilogram package.

This E316L electrode measures 16 inches in length with a 3/32-inch diameter. It is available in a 1.8-kilogram package.

This E316L electrode measures 16 inches in length with a 3/32-inch diameter. It is available in a 1.8-kilogram package.

This OK 55.00 all-position, low-hydrogen, basic steel electrode provides a smooth, stable arc with minimum spatter and is suitable for critical applications requiring exceptional impacts at low temperatures. It is AC-DCEP (electrode positive) with a length of 18 inches and a 5/32-inch diameter. Available in a 6.2-kilogram package.

This OK 55.00 all-position, low-hydrogen, basic steel electrode provides a smooth, stable arc with minimum spatter and is suitable for critical applications requiring exceptional impacts at low temperatures. It is AC-DCEP (electrode positive) with a length of 18 inches and a 5/32-inch diameter. Available in a 6.2-kilogram package.

This OK 61.30 electrode has an extra-low carbon, stainless steel design for welding 19 Cr 10 Ni-type steels and is suitable for welding stabilized stainless steels of similar composition, except when full creep resistance of the base material is to be met. It has a DC+ and AC polarity, a minimum tensile strength of 82,700 PSI, and measures 5/64 inch in diameter. Available in a 1.6-kilogram package.

This OK 61.30 electrode has an extra-low carbon, stainless steel design for welding 19 Cr 10 Ni-type steels and is suitable for welding stabilized stainless steels of similar composition, except when full creep resistance of the base material is to be met. It has a DC+ and AC polarity, a minimum tensile strength of 82,700 PSI, and measures 5/64 inch in diameter. Available in a 1.6-kilogram package.