Product ITEM is unavailable. See products from the same category below.
Solid Router Bits
Solid router bits are used to make plunge and profile cuts in solid surfaces. The geometry of the router bit helps determine the material it's best suited for use with. These router bits are used in CNC routers, machining centres, and milling machines for manufacturing and production applications.
This 63-600 series spiral O-flute upcut routing end mill is made of high-performance solid carbide with a bright finish. It measures 1¼-inch cut length, ¼-inch shank diameter, ¼-inch cutter diameter, three-inch overall length, and 22 degree helix angle. The right-hand end mill has center cutting and a fractional inch measurement system.
This 63-600 series spiral O-flute upcut routing end mill is made of high-performance solid carbide with a bright finish. It measures 1¼-inch cut length, ¼-inch shank diameter, ¼-inch cutter diameter, three-inch overall length, and 22 degree helix angle. The right-hand end mill has center cutting and a fractional inch measurement system.
This spiral O-flute upcut routing end mill is made of high-performance solid carbide with a bright finish. It measures ⅜-inch cut length, ¼-inch shank diameter, ¼-inch cutter diameter, two-inch overall length, and 21 degree helix angle. The right-hand single-routing end mill has center cutting and a fractional inch measurement system.
This spiral O-flute upcut routing end mill is made of high-performance solid carbide with a bright finish. It measures ⅜-inch cut length, ¼-inch shank diameter, ¼-inch cutter diameter, two-inch overall length, and 21 degree helix angle. The right-hand single-routing end mill has center cutting and a fractional inch measurement system.
This 63-700 series spiral O-flute upcut routing end mill is made of high-performance solid carbide with a bright finish. It measures 9/16-inch cut length, ¼-inch shank diameter, 5/32-inch cutter diameter, two-inch overall length, and 21 degree helix angle. The right-hand single-routing end mill has center cutting and a fractional inch measurement system.
This 63-700 series spiral O-flute upcut routing end mill is made of high-performance solid carbide with a bright finish. It measures 9/16-inch cut length, ¼-inch shank diameter, 5/32-inch cutter diameter, two-inch overall length, and 21 degree helix angle. The right-hand single-routing end mill has center cutting and a fractional inch measurement system.
This 57-200 series spiral downcut routing end mill is made of high-performance solid carbide with a bright finish. It measures one-inch cut length, ¼-inch shank diameter, ¼-inch cutter diameter, 2½-inch overall length, two flutes, and 30 degree helix angle. The right-hand end mill has center cutting and a fractional inch measurement system.
This 57-200 series spiral downcut routing end mill is made of high-performance solid carbide with a bright finish. It measures one-inch cut length, ¼-inch shank diameter, ¼-inch cutter diameter, 2½-inch overall length, two flutes, and 30 degree helix angle. The right-hand end mill has center cutting and a fractional inch measurement system.
This 63-750 series spiral O-flute upcut routing end mill is made of high-performance solid carbide with a bright finish. It measures ⅝-inch cut length, ¼-inch shank diameter, 3/16-inch cutter diameter, two-inch overall length, and 21 degree helix angle. The right-hand single-routing end mill has center cutting and a fractional inch measurement system.
This 63-750 series spiral O-flute upcut routing end mill is made of high-performance solid carbide with a bright finish. It measures ⅝-inch cut length, ¼-inch shank diameter, 3/16-inch cutter diameter, two-inch overall length, and 21 degree helix angle. The right-hand single-routing end mill has center cutting and a fractional inch measurement system.
This 190 series solid router bit with a double diamond cut is made of carbide. It measures a ⅜-inch straight shank diameter, a one-inch flute length, 2½-inch overall length, and a maximum speed of 10000 RPM. The single-end router bit is for use with composite material and fibreglass routing.
This 190 series solid router bit with a double diamond cut is made of carbide. It measures a ⅜-inch straight shank diameter, a one-inch flute length, 2½-inch overall length, and a maximum speed of 10000 RPM. The single-end router bit is for use with composite material and fibreglass routing.
This 57-200 series spiral downcut routing end mill is made of high-performance solid carbide with a bright finish. It measures 1⅛-inch cut length, ½-inch shank diameter, ½-inch cutter diameter, three-inch overall length, two flutes, and 30 degree helix angle. The right-hand end mill has center cutting and a fractional inch measurement system.
This 57-200 series spiral downcut routing end mill is made of high-performance solid carbide with a bright finish. It measures 1⅛-inch cut length, ½-inch shank diameter, ½-inch cutter diameter, three-inch overall length, two flutes, and 30 degree helix angle. The right-hand end mill has center cutting and a fractional inch measurement system.
This 57-200 series spiral downcut routing end mill is made of high-performance solid carbide with a bright finish. It measures 1⅛-inch cut length, ¼-inch shank diameter, ¼-inch cutter diameter, three-inch overall length, two flutes, and 30 degree helix angle. The right-hand end mill has center cutting and a fractional inch measurement system.
This 57-200 series spiral downcut routing end mill is made of high-performance solid carbide with a bright finish. It measures 1⅛-inch cut length, ¼-inch shank diameter, ¼-inch cutter diameter, three-inch overall length, two flutes, and 30 degree helix angle. The right-hand end mill has center cutting and a fractional inch measurement system.
This 65-000 series spiral O-flute upcut routing end mill is made of high-performance solid carbide with a bright finish. It measures 7/8-inch cut length, ¼-inch shank diameter, ¼-inch cutter diameter, 2½-inch overall length, and 25 degree helix angle. The right-hand single-routing end mill has center cutting and a fractional inch measurement system.
This 65-000 series spiral O-flute upcut routing end mill is made of high-performance solid carbide with a bright finish. It measures 7/8-inch cut length, ¼-inch shank diameter, ¼-inch cutter diameter, 2½-inch overall length, and 25 degree helix angle. The right-hand single-routing end mill has center cutting and a fractional inch measurement system.
This 63-600 series spiral O-flute upcut routing end mill is made of high-performance solid carbide with a bright finish. It measures ⅝-inch cut length, ¼-inch shank diameter, 3/16-inch cutter diameter, two-inch overall length, and 22 degree helix angle. The right-hand single-routing end mill has center cutting and a fractional inch measurement system.
This 63-600 series spiral O-flute upcut routing end mill is made of high-performance solid carbide with a bright finish. It measures ⅝-inch cut length, ¼-inch shank diameter, 3/16-inch cutter diameter, two-inch overall length, and 22 degree helix angle. The right-hand single-routing end mill has center cutting and a fractional inch measurement system.
This 63-750 series spiral O-flute upcut routing end mill is made of high-performance solid carbide with a bright finish. It measures ½-inch cut length, ¼-inch shank diameter, ⅛-inch cutter diameter, two-inch overall length, and 21 degree helix angle. The right-hand single-routing end mill has center cutting and a fractional inch measurement system.
This 63-750 series spiral O-flute upcut routing end mill is made of high-performance solid carbide with a bright finish. It measures ½-inch cut length, ¼-inch shank diameter, ⅛-inch cutter diameter, two-inch overall length, and 21 degree helix angle. The right-hand single-routing end mill has center cutting and a fractional inch measurement system.
This 61-000P series straight spiral O-flute routing end mill is made of high-performance solid carbide with a bright finish. It measures ⅝-inch cut length, 3/16-inch cutter diameter, ¼-inch shank diameter, two-inch overall length, and zero degree helix angle. The right-hand end mill has center cutting and a fractional inch measurement system.
This 61-000P series straight spiral O-flute routing end mill is made of high-performance solid carbide with a bright finish. It measures ⅝-inch cut length, 3/16-inch cutter diameter, ¼-inch shank diameter, two-inch overall length, and zero degree helix angle. The right-hand end mill has center cutting and a fractional inch measurement system.
This solid router bit with a diamond cut is made of carbide. It measures ¼-inch shank diameter, ¾-inch cut length, 2½-inch overall length, and a maximum speed ranging from 30000 to 40000 RPM. The router bit has center-end mill cutting and right-hand cutting direction. It is for use with composite material.
This solid router bit with a diamond cut is made of carbide. It measures ¼-inch shank diameter, ¾-inch cut length, 2½-inch overall length, and a maximum speed ranging from 30000 to 40000 RPM. The router bit has center-end mill cutting and right-hand cutting direction. It is for use with composite material.
This 62-600 series spiral O-flute downcut routing end mill is made of high-performance solid carbide with a bright finish. It measures ¼-inch cut length, ⅛-inch shank diameter, 1/16-inch cutter diameter, 1½-inch overall length, and 22 degree helix angle. The right-hand end mill has center cutting and a fractional inch measurement system.
This 62-600 series spiral O-flute downcut routing end mill is made of high-performance solid carbide with a bright finish. It measures ¼-inch cut length, ⅛-inch shank diameter, 1/16-inch cutter diameter, 1½-inch overall length, and 22 degree helix angle. The right-hand end mill has center cutting and a fractional inch measurement system.
This 62-700 series spiral O-flute downcut routing end mill is made of high-performance solid carbide with a bright finish. It measures ½-inch cut length, ¼-inch shank diameter, ⅛-inch cutter diameter, two-inch overall length, and 21 degree helix angle. The right-hand single-routing end mill has center cutting and a fractional inch measurement system.
This 62-700 series spiral O-flute downcut routing end mill is made of high-performance solid carbide with a bright finish. It measures ½-inch cut length, ¼-inch shank diameter, ⅛-inch cutter diameter, two-inch overall length, and 21 degree helix angle. The right-hand single-routing end mill has center cutting and a fractional inch measurement system.
To view Availability for another location, please enter postal code below
Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order.
