Product ITEM is unavailable. See products from the same category below.
Retaining Compounds for Metals
Retaining compounds fill the space between unthreaded metal parts to hold them in place and dampen vibration. They are anaerobic, which means they remain fluid until they fill the empty space between metal surfaces and then cure in the absence of air, allowing them to seep into small crevices before bonding. Retaining compounds help reduce friction between tight fitting parts to evenly distribute load, reduce wear, and prevent the production of small particles caused by abrasion. They are often used in automotive or heavy machinery applications to hold bearings inside their housing or mount gears and pulleys onto shafts.
This retaining compound is green and comes in a 1.7 fluid ounce bottle. It meets the standards for 29 CFR 1910.1200. This retaining compound has a working time of four minutes.
This retaining compound is green and comes in a 1.7 fluid ounce bottle. It meets the standards for 29 CFR 1910.1200. This retaining compound has a working time of four minutes.
This retaining compound is green and comes in a 0.3 fluid ounce bottle. It meets the standards for 29 CFR 1910.1200. This retaining compound has a working time of three minutes.
This retaining compound is green and comes in a 0.3 fluid ounce bottle. It meets the standards for 29 CFR 1910.1200. This retaining compound has a working time of three minutes.
This PC 7350 conveyor belt repair is made with a polyurethane compound to provide excellent adhesion and peel strength, flexibility, self-levelling, and a fast two-hour full cure. It has a shear strength of 900 psi and a maximum temperature of 176 Degrees F. Available in a 400-millilitre bottle.
This PC 7350 conveyor belt repair is made with a polyurethane compound to provide excellent adhesion and peel strength, flexibility, self-levelling, and a fast two-hour full cure. It has a shear strength of 900 psi and a maximum temperature of 176 Degrees F. Available in a 400-millilitre bottle.
This retaining compound is green and comes in a 0.3 fluid ounce bottle. It meets the standards for 29 CFR 1910.1200. This retaining compound has a working time of four minutes.
This retaining compound is green and comes in a 0.3 fluid ounce bottle. It meets the standards for 29 CFR 1910.1200. This retaining compound has a working time of four minutes.
This retaining compound is green in colour and comes in a 1.7 fluid ounce bottle. It meets the standards for 29 CFR 1910.1200. This retaining compound has a working time of one hour.
This retaining compound is green in colour and comes in a 1.7 fluid ounce bottle. It meets the standards for 29 CFR 1910.1200. This retaining compound has a working time of one hour.
This retaining compound is green in colour and comes in a 1.7 fluid ounce bottle. It meets the standards for 29 CFR 1910.1200. This retaining compound has a working time of 6 minutes.
This retaining compound is green in colour and comes in a 1.7 fluid ounce bottle. It meets the standards for 29 CFR 1910.1200. This retaining compound has a working time of 6 minutes.
This retaining compound is silver and comes in a 0.2 fluid ounce tube. It meets the standards for 29 CFR 1910.1200. This retaining compound has a working time of 15 minutes.
This retaining compound is silver and comes in a 0.2 fluid ounce tube. It meets the standards for 29 CFR 1910.1200. This retaining compound has a working time of 15 minutes.
This retaining compound is green and comes in a 8.5 fluid ounce bottle. It meets the standards for 29 CFR 1910.1200. This retaining compound has a working time of three minutes.
This retaining compound is green and comes in a 8.5 fluid ounce bottle. It meets the standards for 29 CFR 1910.1200. This retaining compound has a working time of three minutes.
This high-strength, high-viscosity 680 retaining compound fills gaps between loose fitting components to increase the strength of cylindrical, non-threaded assemblies. Its green, slip-fit formula is fast curing and primerless, oil-tolerant, and has a 180 Degrees C rating. Available in a one-litre bottle.
This high-strength, high-viscosity 680 retaining compound fills gaps between loose fitting components to increase the strength of cylindrical, non-threaded assemblies. Its green, slip-fit formula is fast curing and primerless, oil-tolerant, and has a 180 Degrees C rating. Available in a one-litre bottle.
This retaining compound is green in colour and comes in a 0.7 ounce stick. It meets the standards for 29 CFR 1910.1200. This retaining compound has a working time of 10 minutes.
This retaining compound is green in colour and comes in a 0.7 ounce stick. It meets the standards for 29 CFR 1910.1200. This retaining compound has a working time of 10 minutes.
This retaining compound is green in colour and comes in a 1.7 fluid ounce bottle. It meets the standards for 29 CFR 1910.1200. This retaining compound has a working time of two hours.
This retaining compound is green in colour and comes in a 1.7 fluid ounce bottle. It meets the standards for 29 CFR 1910.1200. This retaining compound has a working time of two hours.
This retaining compound is green in colour and comes in a 8.5 fluid ounce bottle. It meets the standards for ASTM D-5363, CFIA Listed, and MIL-R-460B. This retaining compound has a working time of 10 minutes.
This retaining compound is green in colour and comes in a 8.5 fluid ounce bottle. It meets the standards for ASTM D-5363, CFIA Listed, and MIL-R-460B. This retaining compound has a working time of 10 minutes.
This retaining compound is green in colour and comes in a 250 mL bottle. It meets the standards for NSF, Registered to NSF Category P1, RoHs, and WRAS. This retaining compound has a working time of 10 minutes.
This retaining compound is green in colour and comes in a 250 mL bottle. It meets the standards for NSF, Registered to NSF Category P1, RoHs, and WRAS. This retaining compound has a working time of 10 minutes.
This retaining compound is green in colour and comes in a 8.5 fluid ounce bottle. It meets the standards for 29 CFR 1910.1200. This retaining compound has a working time of two hours.
This retaining compound is green in colour and comes in a 8.5 fluid ounce bottle. It meets the standards for 29 CFR 1910.1200. This retaining compound has a working time of two hours.
This conveyor belt repair is amber, black and comes in a 800 g can. Retaining compounds fill the space between unthreaded metal parts to hold them in place and dampen vibration. They are anaerobic, which means they remain fluid until they fill the empty space between metal surfaces and then cure in the absence of air, allowing them to seep into small crevices before bonding.
This conveyor belt repair is amber, black and comes in a 800 g can. Retaining compounds fill the space between unthreaded metal parts to hold them in place and dampen vibration. They are anaerobic, which means they remain fluid until they fill the empty space between metal surfaces and then cure in the absence of air, allowing them to seep into small crevices before bonding.
This retaining compound is green and comes in a 1.7 fluid ounce bottle. It meets the standards for 29 CFR 1910.1200. This retaining compound has a working time of three minutes.
This retaining compound is green and comes in a 1.7 fluid ounce bottle. It meets the standards for 29 CFR 1910.1200. This retaining compound has a working time of three minutes.
To view Availability for another location, please enter postal code below
Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order.
