Instant Adhesives

This PC9462 epoxy adhesive backing compound kit is for use on crushers, has a shear strength of 19,000 PSI, and is available in a 20.5-pound bucket. With a two-hour functional cure and a 24-hour full cure, this kit has blue epoxy, a temperature range of -20 to 200℉, and varying coverage.

This PC9462 epoxy adhesive backing compound kit is for use on crushers, has a shear strength of 19,000 PSI, and is available in a 20.5-pound bucket. With a two-hour functional cure and a 24-hour full cure, this kit has blue epoxy, a temperature range of -20 to 200℉, and varying coverage.

This 495 instant adhesive is clear and comes in a 0.1 fluid ounce tube. It meets the standards for 29 CFR 1910.1200, A-A-3097. This instant adhesive features low viscosity. In addition, it has a working time of 20 seconds and has a tensile strength of 1,990 psi. It is not water-resistant.

This 495 instant adhesive is clear and comes in a 0.1 fluid ounce tube. It meets the standards for 29 CFR 1910.1200, A-A-3097. This instant adhesive features low viscosity. In addition, it has a working time of 20 seconds and has a tensile strength of 1,990 psi. It is not water-resistant.

This 404 instant adhesive is clear and comes in a 0.33 fluid ounce bottle. It meets the standards for 29 CFR 1910.1200, A-A-3097, CFIA. This instant adhesive features bonding plastics and elastomeric materials where very fast fixturing is required, low viscosity. In addition, it has a working time of 30 seconds and has a tensile strength of 755 psi. It is not water-resistant.

This 404 instant adhesive is clear and comes in a 0.33 fluid ounce bottle. It meets the standards for 29 CFR 1910.1200, A-A-3097, CFIA. This instant adhesive features bonding plastics and elastomeric materials where very fast fixturing is required, low viscosity. In addition, it has a working time of 30 seconds and has a tensile strength of 755 psi. It is not water-resistant.

This 454 instant adhesive is clear and comes in a 0.1 fluid ounce tube. It meets the standards for 29 CFR 1910.1200, A-A-3097, CFIA. This instant adhesive features non-wicking, specially suited to porous materials. In addition, it has a working time of 15 seconds and has a tensile strength of 2,190 psi. It is not water-resistant.

This 454 instant adhesive is clear and comes in a 0.1 fluid ounce tube. It meets the standards for 29 CFR 1910.1200, A-A-3097, CFIA. This instant adhesive features non-wicking, specially suited to porous materials. In addition, it has a working time of 15 seconds and has a tensile strength of 2,190 psi. It is not water-resistant.

This AA H8100 structural adhesive is green and comes in a 50 mL dual-cartridge. This structural adhesive features environment resistant, high elongation, non-sag, rapid cure, temperature resistant. In addition, it is impact resistant.

This AA H8100 structural adhesive is green and comes in a 50 mL dual-cartridge. This structural adhesive features environment resistant, high elongation, non-sag, rapid cure, temperature resistant. In addition, it is impact resistant.

This 495 instant adhesive is clear and comes in a one fluid ounce bottle. It meets the standards for 29 CFR 1910.1200, A-A-3097. This instant adhesive features low viscosity. In addition, it has a working time of 5 seconds and has a tensile strength of 1,990 psi. It is not water-resistant.

This 495 instant adhesive is clear and comes in a one fluid ounce bottle. It meets the standards for 29 CFR 1910.1200, A-A-3097. This instant adhesive features low viscosity. In addition, it has a working time of 5 seconds and has a tensile strength of 1,990 psi. It is not water-resistant.

This 406 instant adhesive is clear and comes in a 20 gram bottle. It meets the standards for A-A-3097. This instant adhesive features fast fixture, low viscosity. In addition, it has a working time of 10 seconds and has a tensile strength of 1,890 psi. It is not water-resistant.

This 406 instant adhesive is clear and comes in a 20 gram bottle. It meets the standards for A-A-3097. This instant adhesive features fast fixture, low viscosity. In addition, it has a working time of 10 seconds and has a tensile strength of 1,890 psi. It is not water-resistant.

This sensor-safe, high temperature, room temperature vulcanizing gasket maker resists ageing, weathering, and thermal cycling without hardening, shrinking, or cracking. The red, thixotropic, silicone paste can withstand a temperature range of -59 to 313 Degrees C and has a flashpoint of greater than 93 Degrees C. The non-corrosive sealant begins to harden in 30 minutes and fully cures in 24 hours This non-corrosive product comes in a 300-millilitre cartridge.

This sensor-safe, high temperature, room temperature vulcanizing gasket maker resists ageing, weathering, and thermal cycling without hardening, shrinking, or cracking. The red, thixotropic, silicone paste can withstand a temperature range of -59 to 313 Degrees C and has a flashpoint of greater than 93 Degrees C. The non-corrosive sealant begins to harden in 30 minutes and fully cures in 24 hours This non-corrosive product comes in a 300-millilitre cartridge.

Instant adhesives, also known as superglues, bond and cure the fastest among all adhesives. They are one-part adhesives that need minimal clamping time. Some adhesives require primers to prepare materials before bonding.

Instant adhesives, also known as superglues, bond and cure the fastest among all adhesives. They are one-part adhesives that need minimal clamping time. Some adhesives require primers to prepare materials before bonding.

Instant adhesives, also known as superglues, bond and cure the fastest among all adhesives. They are one-part adhesives that need minimal clamping time. Some adhesives require primers to prepare materials before bonding.

Instant adhesives, also known as superglues, bond and cure the fastest among all adhesives. They are one-part adhesives that need minimal clamping time. Some adhesives require primers to prepare materials before bonding.

This 380 instant adhesive is black and comes in a one fluid ounce bottle. It meets the standards for 29 CFR 1910.1200, CFIA. This instant adhesive features designed for close fitting parts, low viscosity, rubber toughened. In addition, it has a working time of 90 seconds and has a tensile strength of 2,700 psi. It is not water-resistant.

This 380 instant adhesive is black and comes in a one fluid ounce bottle. It meets the standards for 29 CFR 1910.1200, CFIA. This instant adhesive features designed for close fitting parts, low viscosity, rubber toughened. In addition, it has a working time of 90 seconds and has a tensile strength of 2,700 psi. It is not water-resistant.

Instant adhesives, also known as superglues, bond and cure the fastest among all adhesives. They are one-part adhesives that need minimal clamping time. Some adhesives require primers to prepare materials before bonding.

Instant adhesives, also known as superglues, bond and cure the fastest among all adhesives. They are one-part adhesives that need minimal clamping time. Some adhesives require primers to prepare materials before bonding.

This 401 instant adhesive is clear and comes in a 0.7 fluid ounce bottle. It meets the standards for 29 CFR 1910.1200, CFIA. This instant adhesive features very high strength on close fitting parts. In addition, it has a working time of 5 seconds and has a tensile strength of 1,900 psi. It is not water-resistant.

This 401 instant adhesive is clear and comes in a 0.7 fluid ounce bottle. It meets the standards for 29 CFR 1910.1200, CFIA. This instant adhesive features very high strength on close fitting parts. In addition, it has a working time of 5 seconds and has a tensile strength of 1,900 psi. It is not water-resistant.

This Super Glue Brush and Nozzle instant adhesive is clear and comes in a 0.35 fluid ounce bottle. This instant adhesive features impact resistant, precision tip nozzle. In addition, it has a working time of 30 seconds and is waterproof.

This Super Glue Brush and Nozzle instant adhesive is clear and comes in a 0.35 fluid ounce bottle. This instant adhesive features impact resistant, precision tip nozzle. In addition, it has a working time of 30 seconds and is waterproof.

This 0.71-ounce bottle of Superweld super glue provides a strong instant bond in just seconds. It works on multiple and hard-to-bond surfaces. It's clear in colour, can cover 3500 per square inch, and has a tip applicator for even and pinpoint surface applications.

This 0.71-ounce bottle of Superweld super glue provides a strong instant bond in just seconds. It works on multiple and hard-to-bond surfaces. It's clear in colour, can cover 3500 per square inch, and has a tip applicator for even and pinpoint surface applications.

This 480 instant adhesive is black and comes in a 0.7 fluid ounce bottle. It meets the standards for 29 CFR 1910.1200. This instant adhesive features enhanced shock resistance, high shear strength, high tensile strength, increased flexibility and peel strength, rubber reinforced. In addition, it has a working time of 90 seconds and has a tensile strength of 1,700 to 3,600 psi.

This 480 instant adhesive is black and comes in a 0.7 fluid ounce bottle. It meets the standards for 29 CFR 1910.1200. This instant adhesive features enhanced shock resistance, high shear strength, high tensile strength, increased flexibility and peel strength, rubber reinforced. In addition, it has a working time of 90 seconds and has a tensile strength of 1,700 to 3,600 psi.