Cable ladder trays have side rails with rungs to route and support cable. The rungs allow cable to enter and exit anywhere along the span, and they facilitate future changes. These trays also provide free air flow to prevent overheating, which could damage the cable. They mount overhead or under floors, and they're often used in whole-facility installations with large diameter cable in long spans. Their aluminum construction is lightweight and resists corrosion. Cable ladder trays install as systems, with straight sections, fittings, and accessories connecting to form a pathway.
This ladder tray hold down clamp is made of aluminum. In addition, it meets the standards for NEMA VE1. It has length of 2⅜ inch, width of 1 5/8-inch, and a height of 5/16 inches. It is for use with Cope four-inch load depth aluminum ladder trays.
This ladder tray hold down clamp is made of aluminum. In addition, it meets the standards for NEMA VE1. It has length of 2⅜ inch, width of 1 5/8-inch, and a height of 5/16 inches. It is for use with Cope four-inch load depth aluminum ladder trays.
This ladder tray splice plate is made of aluminum. In addition, it meets the standards for NEMA VE1. It has length of six inches, width of 1/eight inches, and a height of four inches. It is for use with Cope four-inch load depth aluminum ladder trays.
This ladder tray splice plate is made of aluminum. In addition, it meets the standards for NEMA VE1. It has length of six inches, width of 1/eight inches, and a height of four inches. It is for use with Cope four-inch load depth aluminum ladder trays.
This ladder tray is made of aluminum. It includes splice plates and hardware. In addition, it meets the standards for NEMA VE-1. It has length of 12 feet, width of 24 inches, and a height of 5¼ inch.
This ladder tray is made of aluminum. It includes splice plates and hardware. In addition, it meets the standards for NEMA VE-1. It has length of 12 feet, width of 24 inches, and a height of 5¼ inch.
This horizontal elbow is made of aluminum. In addition, it meets the standards for NEMA VE1. It has length of 36 inches, width of one foot, and a height of 5¼ inch. It is for use with 1two-inchladder trays 2HCL2 and 2HCL4, and is suitable for changes direction in a horizontal plane applications.
This horizontal elbow is made of aluminum. In addition, it meets the standards for NEMA VE1. It has length of 36 inches, width of one foot, and a height of 5¼ inch. It is for use with 1two-inchladder trays 2HCL2 and 2HCL4, and is suitable for changes direction in a horizontal plane applications.
This ladder tray is made of aluminum. It includes splice plates and hardware. In addition, it meets the standards for NEMA VE-1. It has length of 12 feet, width of 12 inches, and a height of 5¼ inch.
This ladder tray is made of aluminum. It includes splice plates and hardware. In addition, it meets the standards for NEMA VE-1. It has length of 12 feet, width of 12 inches, and a height of 5¼ inch.
This horizontal elbow is made of aluminum. In addition, it meets the standards for NEMA VE1. It has length of four feet, width of two feet, and a height of 5¼ inch. It is for use with 24 inch ladder trays 2HCL3 and 2HCL5, and is suitable for changes direction in a horizontal plane applications.
This horizontal elbow is made of aluminum. In addition, it meets the standards for NEMA VE1. It has length of four feet, width of two feet, and a height of 5¼ inch. It is for use with 24 inch ladder trays 2HCL3 and 2HCL5, and is suitable for changes direction in a horizontal plane applications.
This vertical elbow is made of aluminum. It includes splice plate. In addition, it meets the standards for NEMA VE1. It has length of 29¼ inch, width of two feet, and a height of 24 inch. It is for use with 24 inch ladder trays 2HCL3 and 2HCL5, and is suitable for changes direction up in a vertical plane applications.
This vertical elbow is made of aluminum. It includes splice plate. In addition, it meets the standards for NEMA VE1. It has length of 29¼ inch, width of two feet, and a height of 24 inch. It is for use with 24 inch ladder trays 2HCL3 and 2HCL5, and is suitable for changes direction up in a vertical plane applications.
This ladder tray is made of aluminum. It includes splice plates and hardware. In addition, it meets the standards for NEMA VE-1. It has length of 12 feet, width of 12 inches, and a height of 5¼ inch.
This ladder tray is made of aluminum. It includes splice plates and hardware. In addition, it meets the standards for NEMA VE-1. It has length of 12 feet, width of 12 inches, and a height of 5¼ inch.
This vertical elbow is made of aluminum. It includes splice plate. In addition, it meets the standards for NEMA VE1. It has length of 29¼ inch, width of one foot, and a height of 12 inches. It is for use with 1two-inchladder trays 2HCL2 and 2HCL4, and is suitable for changes direction up in a vertical plane applications.
This vertical elbow is made of aluminum. It includes splice plate. In addition, it meets the standards for NEMA VE1. It has length of 29¼ inch, width of one foot, and a height of 12 inches. It is for use with 1two-inchladder trays 2HCL2 and 2HCL4, and is suitable for changes direction up in a vertical plane applications.
This horizontal tee is made of aluminum. In addition, it meets the standards for NEMA VE1. It has length of five feet, width of 36 inches, and a height of 5¼ inch. It is for use with 1two-inchladder trays 2HCL2 and 2HCL4, and is suitable for connects third tray at a 90 Degrees angle, branches right or left from main run applications.
This horizontal tee is made of aluminum. In addition, it meets the standards for NEMA VE1. It has length of five feet, width of 36 inches, and a height of 5¼ inch. It is for use with 1two-inchladder trays 2HCL2 and 2HCL4, and is suitable for connects third tray at a 90 Degrees angle, branches right or left from main run applications.
This ladder tray splice plate is made of aluminum. In addition, it meets the standards for NEMA VE1. It has length of 7¾-inch, width of 1/eight inches, and a height of four inches. It is for use with Cope four-inch load depth aluminum ladder trays.
This ladder tray splice plate is made of aluminum. In addition, it meets the standards for NEMA VE1. It has length of 7¾-inch, width of 1/eight inches, and a height of four inches. It is for use with Cope four-inch load depth aluminum ladder trays.
This ladder tray is made of aluminum. It includes splice plates and hardware. In addition, it meets the standards for NEMA VE-1. It has length of 12 feet, width of 24 inches, and a height of 5¼ inch.
This ladder tray is made of aluminum. It includes splice plates and hardware. In addition, it meets the standards for NEMA VE-1. It has length of 12 feet, width of 24 inches, and a height of 5¼ inch.
This ladder tray reducing fitting is made of aluminum. In addition, it meets the standards for NEMA VE1. It has length of 12 inches, width of 24 inches, and a height of 5¼ inch. It is for use with Cope 24 inch ladder trays 2HCL3 and 2HCL5.
This ladder tray reducing fitting is made of aluminum. In addition, it meets the standards for NEMA VE1. It has length of 12 inches, width of 24 inches, and a height of 5¼ inch. It is for use with Cope 24 inch ladder trays 2HCL3 and 2HCL5.
To view Availability for another location, please enter postal code below
Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order.
