Anchors create a secure mounting point to attach an item or equipment to a mounting surface. Anchors for concrete, block, and brick install into masonry surfaces and provide a threaded mounting point to secure items into place. Anchors for drywall and plaster attach items onto hollow mounting surfaces without a stud or other structural member. Adhesive anchors, also called chemical anchors, use adhesives to secure the anchor and hold items in place. Rod hangers install into a mounting surface, providing a mounting point for threaded rods and fasteners. Spring anchors screw into a mounting surface or threaded hole and create a point to secure springs, cables, and wires.
These Tapcon screw anchors have a hex head drive and are for exterior insulation systems and masonry. The anchor is 1 3/4 x 1/4 inches and the drill bit is 3 1/2 x 3/16 inches. These screws have a one-inch minimum embedment and a 3/4-inch maximum work thickness, with an ultimate shear of 620 to 1,000 pounds and an ultimate tension of 250 to 500 pounds. These anchors come in a box of 100.
These Tapcon screw anchors have a hex head drive and are for exterior insulation systems and masonry. The anchor is 1 3/4 x 1/4 inches and the drill bit is 3 1/2 x 3/16 inches. These screws have a one-inch minimum embedment and a 3/4-inch maximum work thickness, with an ultimate shear of 620 to 1,000 pounds and an ultimate tension of 250 to 500 pounds. These anchors come in a box of 100.
This screw anchor is made of steel and has a corrosion resistant finish. Plus, it includes #6, #7, #8 screws. This screw anchor is designed for use with drywall.
This screw anchor is made of steel and has a corrosion resistant finish. Plus, it includes #6, #7, #8 screws. This screw anchor is designed for use with drywall.
These Tapcon screw anchors have a hex head drive and are for exterior insulation systems and masonry. The anchor is 2 1/4 x 1/4 inches and the drill bit is 4 1/2 x 3/16 inches. These screws have a one-inch minimum embedment and a 1 1/4-inch maximum work thickness, with an ultimate shear of 620 to 1,000 pounds and an ultimate tension of 250 to 500 pounds. These anchors come in a box of 100.
These Tapcon screw anchors have a hex head drive and are for exterior insulation systems and masonry. The anchor is 2 1/4 x 1/4 inches and the drill bit is 4 1/2 x 3/16 inches. These screws have a one-inch minimum embedment and a 1 1/4-inch maximum work thickness, with an ultimate shear of 620 to 1,000 pounds and an ultimate tension of 250 to 500 pounds. These anchors come in a box of 100.
This mechanical anchor is made of steel and has a zinc-plated finish. It meets the standards for ACI 355.2 material quality, and 2006 and 2009 International Building Code (IBC) compliant, A-A-1923A Type 4, FM Approved, ICC-ES AC19, UL Listed industry standards. This mechanical anchor is designed for use with concrete.
This mechanical anchor is made of steel and has a zinc-plated finish. It meets the standards for ACI 355.2 material quality, and 2006 and 2009 International Building Code (IBC) compliant, A-A-1923A Type 4, FM Approved, ICC-ES AC19, UL Listed industry standards. This mechanical anchor is designed for use with concrete.
These Twist-n-Lock E-Z anchors are for use in drywall up to 5/8 inches. These white mini self-drilling anchors have a minimum embedment of 1/2 inches, a 3/4-inch maximum thickness, and a 7/16-inch anchor diameter. These #6 screw anchors are made of nylon.
These Twist-n-Lock E-Z anchors are for use in drywall up to 5/8 inches. These white mini self-drilling anchors have a minimum embedment of 1/2 inches, a 3/4-inch maximum thickness, and a 7/16-inch anchor diameter. These #6 screw anchors are made of nylon.
These white self-drilling Twist-n-Lock E-Z anchors have a minimum embedment of 7/8 inches, a 3/4-inch maximum thickness, and a 1/2-inch anchor diameter. These #6 screw anchors are made of nylon and come in a box of 100.
These white self-drilling Twist-n-Lock E-Z anchors have a minimum embedment of 7/8 inches, a 3/4-inch maximum thickness, and a 1/2-inch anchor diameter. These #6 screw anchors are made of nylon and come in a box of 100.
Carbon steel imperial dynaset threaded drop-in anchor is a one-piece female anchor, ready for installation. Provides neat flush finish with high holding powers at relatively shallow embedment, 3/8 inch. Box quantity of 50.
Carbon steel imperial dynaset threaded drop-in anchor is a one-piece female anchor, ready for installation. Provides neat flush finish with high holding powers at relatively shallow embedment, 3/8 inch. Box quantity of 50.
These Tapcon screw anchors have a hex head drive and are for exterior insulation systems and masonry. The anchor is 3 1/4 x 1/4 inches and the drill bit is 5 1/2 x 3/16 inches. These screws have a one-inch minimum embedment and a 2 1/4-inch maximum work thickness, with an ultimate shear of 620 to 1,000 pounds and an ultimate tension of 250 to 500 pounds. These anchors come in a box of 100.
These Tapcon screw anchors have a hex head drive and are for exterior insulation systems and masonry. The anchor is 3 1/4 x 1/4 inches and the drill bit is 5 1/2 x 3/16 inches. These screws have a one-inch minimum embedment and a 2 1/4-inch maximum work thickness, with an ultimate shear of 620 to 1,000 pounds and an ultimate tension of 250 to 500 pounds. These anchors come in a box of 100.
These Tapcon screw anchors have a hex head drive and are for exterior insulation systems and masonry. The anchor is 4 x 1/4 inches and the drill bit is 5 1/2 x 3/16 inches. These screws have a one-inch minimum embedment and a three-inch maximum work thickness, with an ultimate shear of 620 to 1,000 pounds and an ultimate tension of 250 to 500 pounds. These anchors come in a box of 100.
These Tapcon screw anchors have a hex head drive and are for exterior insulation systems and masonry. The anchor is 4 x 1/4 inches and the drill bit is 5 1/2 x 3/16 inches. These screws have a one-inch minimum embedment and a three-inch maximum work thickness, with an ultimate shear of 620 to 1,000 pounds and an ultimate tension of 250 to 500 pounds. These anchors come in a box of 100.
These Tapcon screw anchors have a Phillips head drive and are for exterior insulation systems and masonry. The anchor is 2 3/4 x 3/16 inches and the drill bit is 4 1/2 x 5/32 inches. These screws have a one-inch minimum embedment and a 1 3/4-inch maximum work thickness, with an ultimate shear of 400 to 730 pounds and an ultimate tension of 220 to 340 pounds. These anchors come in a box of 100.
These Tapcon screw anchors have a Phillips head drive and are for exterior insulation systems and masonry. The anchor is 2 3/4 x 3/16 inches and the drill bit is 4 1/2 x 5/32 inches. These screws have a one-inch minimum embedment and a 1 3/4-inch maximum work thickness, with an ultimate shear of 400 to 730 pounds and an ultimate tension of 220 to 340 pounds. These anchors come in a box of 100.
Masonry anchor cuts its own threads into concrete, block, or brick. Ideal for window and door frame installations and Z bar to masonry. Torx 3/16 inch x 1-1/4 inches.
Masonry anchor cuts its own threads into concrete, block, or brick. Ideal for window and door frame installations and Z bar to masonry. Torx 3/16 inch x 1-1/4 inches.
These Tapcon screw anchors have a torx (star drive head) and are for exterior insulation systems and masonry. The anchor is 1 1/4 x 1/4 inches and the drill bit is 3 1/2 x 3/16 inches. These screws have a one-inch minimum embedment and a 1 1/4-inch maximum work thickness, with an ultimate shear of 620 to 1,000 pounds and an ultimate tension of 250 to 500 pounds.
These Tapcon screw anchors have a torx (star drive head) and are for exterior insulation systems and masonry. The anchor is 1 1/4 x 1/4 inches and the drill bit is 3 1/2 x 3/16 inches. These screws have a one-inch minimum embedment and a 1 1/4-inch maximum work thickness, with an ultimate shear of 620 to 1,000 pounds and an ultimate tension of 250 to 500 pounds.
This wedge anchor is made of steel and has a zinc-plated finish. Plus, it includes a nut and washer. This wedge anchor is designed for use with concrete.
This wedge anchor is made of steel and has a zinc-plated finish. Plus, it includes a nut and washer. This wedge anchor is designed for use with concrete.
To view Availability for another location, please enter postal code below
Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order.
