Airline Filtration & CO Monitors for SAR

This 41 series replacement filter cartridge with supplied air respirator system is made of steel. It is for use with 41A, 41P2, and 41P6 air-line filters.

This 41 series replacement filter cartridge with supplied air respirator system is made of steel. It is for use with 41A, 41P2, and 41P6 air-line filters.

This replacement filter kit is suitable for use with BB50-series breather box air filtration panels. The supplied-air respirator kit includes an A replacement filter, a C replacement filter, and a D replacement filter.

This replacement filter kit is suitable for use with BB50-series breather box air filtration panels. The supplied-air respirator kit includes an A replacement filter, a C replacement filter, and a D replacement filter.

This breather box with four couplings has a flow capacity of 79 cubic feet per minute. It offers 50 cubic feet per minute of filtration and meets the CSA Z180.1 and NIOSH standards. The breather box has a 1/2 inch industrial interchange inlet and provides grade-D breathing air for four users. A built-in carbon monoxide monitor operates on 9V DC and/or 115V AC for continuous detection.

This breather box with four couplings has a flow capacity of 79 cubic feet per minute. It offers 50 cubic feet per minute of filtration and meets the CSA Z180.1 and NIOSH standards. The breather box has a 1/2 inch industrial interchange inlet and provides grade-D breathing air for four users. A built-in carbon monoxide monitor operates on 9V DC and/or 115V AC for continuous detection.

This breather box with four couplings has a flow capacity of 123 cubic feet per minute. It offers 100 cubic feet per minute filtration and meets the CSA Z180.1 breathing air standard. The breather box has a 1/2 inch industrial interchange inlet and provides grade-D breathing air for four users. A built-in carbon monoxide monitor operates on 9V DC and/or 115V AC for continuous detection.

This breather box with four couplings has a flow capacity of 123 cubic feet per minute. It offers 100 cubic feet per minute filtration and meets the CSA Z180.1 breathing air standard. The breather box has a 1/2 inch industrial interchange inlet and provides grade-D breathing air for four users. A built-in carbon monoxide monitor operates on 9V DC and/or 115V AC for continuous detection.

This stage-1 particulate filter is suitable for use with BB50-CO breather box air filtration. The supplied-air respirator kit includes O-ring.

This stage-1 particulate filter is suitable for use with BB50-CO breather box air filtration. The supplied-air respirator kit includes O-ring.

This replacement filter kit includes two five-micron filter elements, one 0.01-micron filter element, and one 0.003-micron filter element. It is suitable for use with 9874-MR four-worker systems multi-regulator of supplied-air-respirator system.

This replacement filter kit includes two five-micron filter elements, one 0.01-micron filter element, and one 0.003-micron filter element. It is suitable for use with 9874-MR four-worker systems multi-regulator of supplied-air-respirator system.

This breather box with two couplings has a flow capacity of 48 cubic feet per minute. It offers 30 cubic feet per minute of filtration and meets the CSA Z180.1 and NIOSH standards. The breather box has a 1/2 inch industrial interchange inlet and provides grade-D breathing air for three users. A built-in carbon monoxide monitor operates on 9V DC and/or 115V AC for continuous detection.

This breather box with two couplings has a flow capacity of 48 cubic feet per minute. It offers 30 cubic feet per minute of filtration and meets the CSA Z180.1 and NIOSH standards. The breather box has a 1/2 inch industrial interchange inlet and provides grade-D breathing air for three users. A built-in carbon monoxide monitor operates on 9V DC and/or 115V AC for continuous detection.

This portable air filtration panel for two-worker systems has a rugged Pelican case with a carrying handle, latches for protection and security, and CO monitor with 115V AC to 9V DC power adapter. This panel provides up to 30 cubic feet meter of air ranging from 5 to 125 pounds per square inch. It measures 13 length x 6 width x 12 inches height and has quick-disconnect Hansen couplers.

This portable air filtration panel for two-worker systems has a rugged Pelican case with a carrying handle, latches for protection and security, and CO monitor with 115V AC to 9V DC power adapter. This panel provides up to 30 cubic feet meter of air ranging from 5 to 125 pounds per square inch. It measures 13 length x 6 width x 12 inches height and has quick-disconnect Hansen couplers.

This replacement filter kit is suitable for use with BB15-CO and BB30-CO breather box air filtration units. The supplied-air respirator kit includes an A replacement filter, a C replacement filter, and a D replacement filter.

This replacement filter kit is suitable for use with BB15-CO and BB30-CO breather box air filtration units. The supplied-air respirator kit includes an A replacement filter, a C replacement filter, and a D replacement filter.

This carbon monoxide calibration kit is a two-point calibration for accurate monitoring of filtered air by the oil-less compressor/carry-air/wall air filtration panels. It has a durable plastic case with an integrated carrying handle/latch, span gas, zero gas, and regulator. It measures 15 length x 8 width x 5 1/2 inches height and is suitable for use with a supplied-air-respirator system.

This carbon monoxide calibration kit is a two-point calibration for accurate monitoring of filtered air by the oil-less compressor/carry-air/wall air filtration panels. It has a durable plastic case with an integrated carrying handle/latch, span gas, zero gas, and regulator. It measures 15 length x 8 width x 5 1/2 inches height and is suitable for use with a supplied-air-respirator system.

This breathing air panel with four couplings has a flow capacity of 79 cubic feet per minute. It offers 50 cubic feet per minute filtration and meets the CSA Z180.1 and NIOSH standards. The air panel has a 1/2 inch industrial interchange inlet and provides grade-D breathing air for four users. A built-in carbon monoxide monitor operates on 9V DC and/or 115V AC for continuous detection.

This breathing air panel with four couplings has a flow capacity of 79 cubic feet per minute. It offers 50 cubic feet per minute filtration and meets the CSA Z180.1 and NIOSH standards. The air panel has a 1/2 inch industrial interchange inlet and provides grade-D breathing air for four users. A built-in carbon monoxide monitor operates on 9V DC and/or 115V AC for continuous detection.

This auto-drain assembly of supplied-air respirator system has an operating pressure of 150 pounds per square inch and includes a gauge. It is suitable for use with breather box air filtration.

This auto-drain assembly of supplied-air respirator system has an operating pressure of 150 pounds per square inch and includes a gauge. It is suitable for use with breather box air filtration.

This portable carbon monoxide monitor with lights and alarm has a maximum inlet pressure of 150 pounds per square inch and a five feet hose. It is suitable for eight users and runs on 9V DC/115V AC. The carbon monoxide monitor has 3/16 inch colder plug fittings and includes an attachment kit for any brand air pump, filters, and compressors.

This portable carbon monoxide monitor with lights and alarm has a maximum inlet pressure of 150 pounds per square inch and a five feet hose. It is suitable for eight users and runs on 9V DC/115V AC. The carbon monoxide monitor has 3/16 inch colder plug fittings and includes an attachment kit for any brand air pump, filters, and compressors.

This adapter with 100 to 120V AC power comes in black. The adapter has a capacity of 50/100 cubic feet per minute. It is suitable for use with carbon monoxide monitor in portable compressed air filter, regulator panel 256-02-00/256-02-01, and retrofit carbon monoxide monitor kit W-2808.

This adapter with 100 to 120V AC power comes in black. The adapter has a capacity of 50/100 cubic feet per minute. It is suitable for use with carbon monoxide monitor in portable compressed air filter, regulator panel 256-02-00/256-02-01, and retrofit carbon monoxide monitor kit W-2808.

This supplied-air calibration kit comes in black. It is used to calibrate the carbon monoxide monitors and includes a 3/5 cubic foot cylinder of zero gas, a 3/5 cubic foot cylinder of span gas, a cylinder valve, and a case. The calibration kit has a capacity of 50/100 cubic feet per minute and is suitable for use with a portable compressed air filter, a regulator panel, and a retrofit CO monitor kit.

This supplied-air calibration kit comes in black. It is used to calibrate the carbon monoxide monitors and includes a 3/5 cubic foot cylinder of zero gas, a 3/5 cubic foot cylinder of span gas, a cylinder valve, and a case. The calibration kit has a capacity of 50/100 cubic feet per minute and is suitable for use with a portable compressed air filter, a regulator panel, and a retrofit CO monitor kit.

This portable air filtration panel for five-worker systems has a rugged Pelican case with a handle, a 16 gauge steel stand-coated with black powder, quick-disconnect Hansen brass couplers, and CO monitor with 115V AC to 9V DC power adapter. This panel provides up to 60 cubic feet meter of air pressure ranging from 5 to 125 pounds per square inch. It measures 20 1/2 length x 6 3/4 width x 14 1/2 inches height.

This portable air filtration panel for five-worker systems has a rugged Pelican case with a handle, a 16 gauge steel stand-coated with black powder, quick-disconnect Hansen brass couplers, and CO monitor with 115V AC to 9V DC power adapter. This panel provides up to 60 cubic feet meter of air pressure ranging from 5 to 125 pounds per square inch. It measures 20 1/2 length x 6 3/4 width x 14 1/2 inches height.