Air, Oil and Water Solenoid Valves

This two-way, normally closed solenoid valve is for control of air, inert gas, water, or light oil applications. This 120 AC valve has a 3/4-inch orifice diameter, a 82 Degrees F maximum fluid temperature, and a 125 PSI maximum operating pressure. This 6:1 watt, 60 Hz valve is made of brass with an NBR seal and is CSA certified.

This two-way, normally closed solenoid valve is for control of air, inert gas, water, or light oil applications. This 120 AC valve has a 3/4-inch orifice diameter, a 82 Degrees F maximum fluid temperature, and a 125 PSI maximum operating pressure. This 6:1 watt, 60 Hz valve is made of brass with an NBR seal and is CSA certified.

This two-way, normally closed solenoid valve is for control of air, inert gas, water, or light oil applications. This 120 AC valve has a 1/2-inch orifice diameter, a 180 Degrees F maximum fluid temperature, and a 150 PSI maximum operating pressure. This 10:1 watt, 60 Hz valve is made of brass with an NBR seal and is CSA certified.

This two-way, normally closed solenoid valve is for control of air, inert gas, water, or light oil applications. This 120 AC valve has a 1/2-inch orifice diameter, a 180 Degrees F maximum fluid temperature, and a 150 PSI maximum operating pressure. This 10:1 watt, 60 Hz valve is made of brass with an NBR seal and is CSA certified.

This is a 24DC, 11.6 watts, normally-closed valve. It's 1/2-inch in size, brass with galvanized pipe, and a nitrile rubber seat. This high flow valve is used to control air, inert gas, water, or light oil applications, including laundry equipment and industrial controls.

This is a 24DC, 11.6 watts, normally-closed valve. It's 1/2-inch in size, brass with galvanized pipe, and a nitrile rubber seat. This high flow valve is used to control air, inert gas, water, or light oil applications, including laundry equipment and industrial controls.

This UL/CSA/CE-certified, normally closed (NC), 3/4-inch, 2-way/2-position brass solenoid valve has an orifice diameter of 3/32 inches with an electric rating of 120 volts AC and 10.1 watts. The maximum allowable pressure is 150 PSI. It is used in car washes, air compressor pumps, laundry equipment, and industrial controls.

This UL/CSA/CE-certified, normally closed (NC), 3/4-inch, 2-way/2-position brass solenoid valve has an orifice diameter of 3/32 inches with an electric rating of 120 volts AC and 10.1 watts. The maximum allowable pressure is 150 PSI. It is used in car washes, air compressor pumps, laundry equipment, and industrial controls.

This UL/CSA/CE-certified, normally closed (NC), 3/8-inch, 2-way/2-position brass solenoid valve has an orifice diameter of 5/8 inches with an electric rating of 120 volts AC and 10.1 watts. The maximum allowable pressure is 125 PSI. It is used in car washes, air compressor pumps, laundry equipment, and industrial controls.

This UL/CSA/CE-certified, normally closed (NC), 3/8-inch, 2-way/2-position brass solenoid valve has an orifice diameter of 5/8 inches with an electric rating of 120 volts AC and 10.1 watts. The maximum allowable pressure is 125 PSI. It is used in car washes, air compressor pumps, laundry equipment, and industrial controls.

This two-way, normally closed solenoid valve is for control of air, inert gas, water, or light oil applications. This 120 AC valve has a one-inch orifice diameter, a 180 Degrees F maximum fluid temperature, and a 150 PSI maximum operating pressure. This 6:1 watt, 60 Hz valve is made of brass with an NBR seal and is CSA certified.

This two-way, normally closed solenoid valve is for control of air, inert gas, water, or light oil applications. This 120 AC valve has a one-inch orifice diameter, a 180 Degrees F maximum fluid temperature, and a 150 PSI maximum operating pressure. This 6:1 watt, 60 Hz valve is made of brass with an NBR seal and is CSA certified.

This two-way, normally closed solenoid valve is for control of air, inert gas, water, or light oil applications. This 120 AC valve has a 1/4-inch orifice diameter, a 82 Degrees F maximum fluid temperature, and a 180 PSI maximum operating pressure. This 6:1 watt valve is made of brass with an NBR seal and is CSA certified.

This two-way, normally closed solenoid valve is for control of air, inert gas, water, or light oil applications. This 120 AC valve has a 1/4-inch orifice diameter, a 82 Degrees F maximum fluid temperature, and a 180 PSI maximum operating pressure. This 6:1 watt valve is made of brass with an NBR seal and is CSA certified.

This UL/CSA/CE-certified, normally closed (NC), 3/4-inch, 2-way/2-position brass solenoid valve has an orifice diameter of 3/4 inches with an electric rating of 24 volts AC and 11.6 watts. The maximum allowable pressure is 90 PSI. It is used in car washes, air compressor pumps, laundry equipment, and industrial controls.

This UL/CSA/CE-certified, normally closed (NC), 3/4-inch, 2-way/2-position brass solenoid valve has an orifice diameter of 3/4 inches with an electric rating of 24 volts AC and 11.6 watts. The maximum allowable pressure is 90 PSI. It is used in car washes, air compressor pumps, laundry equipment, and industrial controls.

This UL/CSA/CE-certified, normally open, 1/2-inch, 2-way/2-position brass solenoid valve has an orifice diameter of 5/8 inches with an electric rating of 120 volts AC and 10.1 watts. The maximum allowable pressure is 150 PSI. It is used in car washes, air compressor pumps, laundry equipment, and industrial controls.

This UL/CSA/CE-certified, normally open, 1/2-inch, 2-way/2-position brass solenoid valve has an orifice diameter of 5/8 inches with an electric rating of 120 volts AC and 10.1 watts. The maximum allowable pressure is 150 PSI. It is used in car washes, air compressor pumps, laundry equipment, and industrial controls.