Threadlockers & Retaining Compounds

243 removable theadlocker is a general-purpose threadlocking adhesive especially well suited for fasteners between 1/4 in. and 3/4 in. diameter (6 to 20 mm). Applied to threaded components before assembly, 50 mL bottle.

243 removable theadlocker is a general-purpose threadlocking adhesive especially well suited for fasteners between 1/4 in. and 3/4 in. diameter (6 to 20 mm). Applied to threaded components before assembly, 50 mL bottle.

This medium-strength threadlocker is blue and comes in a 0.02 fluid ounce capsule. It meets the standards for ASTM D-5363, MIL-S-46163-A. This medium-strength threadlocker has a working time of five minutes, and has a threadlocking strength of medium.

This medium-strength threadlocker is blue and comes in a 0.02 fluid ounce capsule. It meets the standards for ASTM D-5363, MIL-S-46163-A. This medium-strength threadlocker has a working time of five minutes, and has a threadlocking strength of medium.

243 removable theadlocker is a general-purpose threadlocking adhesive especially well suited for fasteners between 1/4 in. and 3/4 in. diameter (6 to 20 mm). Applied to threaded components before assembly, 10 mL bottle.

243 removable theadlocker is a general-purpose threadlocking adhesive especially well suited for fasteners between 1/4 in. and 3/4 in. diameter (6 to 20 mm). Applied to threaded components before assembly, 10 mL bottle.

This primerless high-strength threadlocker is red and comes in a 1.69 fluid ounce bottle. It meets the standards for CEPA DSL/NDSL, CERCLA/SARA 311, CERCLA/SARA 312, CERCLA/SARA 313, OSHA 29 CFR 1910.1200, TSCA. This primerless high-strength threadlocker has a working time of 10 minutes, and has a threadlocking strength of high, and is oil tolerant, primerless.

This primerless high-strength threadlocker is red and comes in a 1.69 fluid ounce bottle. It meets the standards for CEPA DSL/NDSL, CERCLA/SARA 311, CERCLA/SARA 312, CERCLA/SARA 313, OSHA 29 CFR 1910.1200, TSCA. This primerless high-strength threadlocker has a working time of 10 minutes, and has a threadlocking strength of high, and is oil tolerant, primerless.

This medium-strength threadlocker is blue and comes in a 0.34 fluid ounce bottle. It meets the standards for ASTM D-5363, MIL-S-46163-A. This medium-strength threadlocker has a working time of five minutes, and has a threadlocking strength of medium.

This medium-strength threadlocker is blue and comes in a 0.34 fluid ounce bottle. It meets the standards for ASTM D-5363, MIL-S-46163-A. This medium-strength threadlocker has a working time of five minutes, and has a threadlocking strength of medium.

Gel Twist(TM) threadlocker will not drip or run like traditional liquid threadlockers. Threadlocker gel stays on the part which makes it great for vertical and overhead applications. Extended nozzle allows for easy applications in hard-to-reach locations.

Gel Twist(TM) threadlocker will not drip or run like traditional liquid threadlockers. Threadlocker gel stays on the part which makes it great for vertical and overhead applications. Extended nozzle allows for easy applications in hard-to-reach locations.

This medium-strength threadlocker is blue and comes in a 1.69 fluid ounce bottle. It meets the standards for ASTM D-5363, MIL-S-46163-A. This medium-strength threadlocker has a working time of five minutes, and has a threadlocking strength of medium.

This medium-strength threadlocker is blue and comes in a 1.69 fluid ounce bottle. It meets the standards for ASTM D-5363, MIL-S-46163-A. This medium-strength threadlocker has a working time of five minutes, and has a threadlocking strength of medium.

This high-strength threadlocker is red and comes in a 0.34 fluid ounce bottle. It meets the standards for ASTM D-5363, MIL-S-46163-A. This high-strength threadlocker has a working time of 8 minutes, and has a threadlocking strength of high, and is oil tolerant.

This high-strength threadlocker is red and comes in a 0.34 fluid ounce bottle. It meets the standards for ASTM D-5363, MIL-S-46163-A. This high-strength threadlocker has a working time of 8 minutes, and has a threadlocking strength of high, and is oil tolerant.

This high-strength threadlocker is red and comes in a 1.69 fluid ounce bottle. It meets the standards for ASTM D-5363, MIL-S-46163-A. This high-strength threadlocker has a working time of 8 minutes, and has a threadlocking strength of high, and is oil tolerant.

This high-strength threadlocker is red and comes in a 1.69 fluid ounce bottle. It meets the standards for ASTM D-5363, MIL-S-46163-A. This high-strength threadlocker has a working time of 8 minutes, and has a threadlocking strength of high, and is oil tolerant.

This high-strength threadlocker is red and comes in a 1.69 fluid ounce bottle. It meets the standards for ASTM D-5363, MIL-S-46163-A. This high-strength threadlocker has a working time of 45 minutes, and has a threadlocking strength of high, and is oil tolerant.

This high-strength threadlocker is red and comes in a 1.69 fluid ounce bottle. It meets the standards for ASTM D-5363, MIL-S-46163-A. This high-strength threadlocker has a working time of 45 minutes, and has a threadlocking strength of high, and is oil tolerant.

This retaining compound is green in colour and comes in a 0.3 fluid ounce bottle. It meets the standards for 29 CFR 1910.1200. This retaining compound has a working time of 10 minutes.

This retaining compound is green in colour and comes in a 0.3 fluid ounce bottle. It meets the standards for 29 CFR 1910.1200. This retaining compound has a working time of 10 minutes.

This six-millilitre series 243 medium-strength threadlocker has a 24-hour full cure and 1350 to 3000 thixotropic viscosity. With a dimethacrylate ester chemical type, this surf-insensitive threadlocker has 1.08 specific gravity and a flash point greater than 93.3C. It is oil-resistant and is removable with 1/4 to 3/4-inch hardware.

This six-millilitre series 243 medium-strength threadlocker has a 24-hour full cure and 1350 to 3000 thixotropic viscosity. With a dimethacrylate ester chemical type, this surf-insensitive threadlocker has 1.08 specific gravity and a flash point greater than 93.3C. It is oil-resistant and is removable with 1/4 to 3/4-inch hardware.

This retaining compound is green in colour and comes in a 1.7 fluid ounce bottle. It meets the standards for 29 CFR 1910.1200. This retaining compound has a working time of one hour.

This retaining compound is green in colour and comes in a 1.7 fluid ounce bottle. It meets the standards for 29 CFR 1910.1200. This retaining compound has a working time of one hour.

This retaining compound is green and comes in a 8.5 fluid ounce bottle. It meets the standards for 29 CFR 1910.1200. This retaining compound has a working time of four minutes.

This retaining compound is green and comes in a 8.5 fluid ounce bottle. It meets the standards for 29 CFR 1910.1200. This retaining compound has a working time of four minutes.

This thread locker is blue. It meets the standards for California Proposition 65, Grade N, Mil-S-46163A, NSF, OEM Specified, Type II. This thread locker has a working time of 20 minutes, and has a threadlocking strength of medium, and is no-drip.

This thread locker is blue. It meets the standards for California Proposition 65, Grade N, Mil-S-46163A, NSF, OEM Specified, Type II. This thread locker has a working time of 20 minutes, and has a threadlocking strength of medium, and is no-drip.

This low-strength threadlocker is purple and comes in a 0.34 fluid ounce bottle. It meets the standards for Mil-S-46163-A Type II Grade M. This low-strength threadlocker has a working time of 20 minutes, and has a threadlocking strength of low, and it meets mil spec.

This low-strength threadlocker is purple and comes in a 0.34 fluid ounce bottle. It meets the standards for Mil-S-46163-A Type II Grade M. This low-strength threadlocker has a working time of 20 minutes, and has a threadlocking strength of low, and it meets mil spec.