Stick Welding Electrodes

This OK 55.00 low-hydrogen, all-position, basic electrode is suitable for critical applications requiring exceptional impacts at low temperatures, and provides a smooth, stable arc with very low spatter. It is AC-DCEP (electrode positive), made of steel, and measures 14 inches in length with an 1/8-inch diameter. Available in a 4.7-kilogram package.

This OK 55.00 low-hydrogen, all-position, basic electrode is suitable for critical applications requiring exceptional impacts at low temperatures, and provides a smooth, stable arc with very low spatter. It is AC-DCEP (electrode positive), made of steel, and measures 14 inches in length with an 1/8-inch diameter. Available in a 4.7-kilogram package.

This LA 7018 mild-steel electrode is a basic low hydrogen, all-position electrode (E7018-1) used on either DC or AC current. It can obtain code quality welds on higher strength steels with weld-metal toughness properties (charpy impacts) down to -46 Degrees C (-50 Degrees F), when coupled with a low hydrogen weld deposit. It is 14 inches in length with an 1/8-inch diameter, and meets CSA, Class E4918-1-H4 standards. Available in a five-kilogram package.

This LA 7018 mild-steel electrode is a basic low hydrogen, all-position electrode (E7018-1) used on either DC or AC current. It can obtain code quality welds on higher strength steels with weld-metal toughness properties (charpy impacts) down to -46 Degrees C (-50 Degrees F), when coupled with a low hydrogen weld deposit. It is 14 inches in length with an 1/8-inch diameter, and meets CSA, Class E4918-1-H4 standards. Available in a five-kilogram package.

This OK 55.00 all-position, low-hydrogen, basic steel electrode provides a smooth, stable arc with minimum spatter and is suitable for critical applications requiring exceptional impacts at low temperatures. It is AC-DCEP (electrode positive) with a length of 18 inches and a 5/32-inch diameter. Available in a 6.2-kilogram package.

This OK 55.00 all-position, low-hydrogen, basic steel electrode provides a smooth, stable arc with minimum spatter and is suitable for critical applications requiring exceptional impacts at low temperatures. It is AC-DCEP (electrode positive) with a length of 18 inches and a 5/32-inch diameter. Available in a 6.2-kilogram package.

This OK 55.00 all-position, low-hydrogen, basic steel electrode provides a smooth, stable arc with minimum spatter and is suitable for critical applications requiring exceptional impacts at low temperatures. It is AC-DCEP (electrode positive) with a length of 18 inches and a 3/16-inch diameter. Available in a 6.1-kilogram package.

This OK 55.00 all-position, low-hydrogen, basic steel electrode provides a smooth, stable arc with minimum spatter and is suitable for critical applications requiring exceptional impacts at low temperatures. It is AC-DCEP (electrode positive) with a length of 18 inches and a 3/16-inch diameter. Available in a 6.1-kilogram package.

This LA 7018 mild-steel electrode is a basic low hydrogen, all-position electrode (E7018-1) used on either DC or AC current. It can obtain code quality welds on higher strength steels with weld-metal toughness properties (charpy impacts) down to -46 Degrees C (-50 Degrees F), when coupled with a low hydrogen weld deposit. It is 12 inches in length with a 3/32-inch diameter, and meets CSA, Class E4918-1-H4 standards. Available in a 2.5-kilogram package.

This LA 7018 mild-steel electrode is a basic low hydrogen, all-position electrode (E7018-1) used on either DC or AC current. It can obtain code quality welds on higher strength steels with weld-metal toughness properties (charpy impacts) down to -46 Degrees C (-50 Degrees F), when coupled with a low hydrogen weld deposit. It is 12 inches in length with a 3/32-inch diameter, and meets CSA, Class E4918-1-H4 standards. Available in a 2.5-kilogram package.

This OK 55.00 low-hydrogen, all-position, basic electrode is suitable for critical applications requiring exceptional impacts at low temperatures, and provides a smooth, stable arc with very low spatter. It is AC-DCEP (electrode positive), made of steel, and measures 14 inches in length with a 3/32-inch diameter. Available in a 4.1-kilogram package.

This OK 55.00 low-hydrogen, all-position, basic electrode is suitable for critical applications requiring exceptional impacts at low temperatures, and provides a smooth, stable arc with very low spatter. It is AC-DCEP (electrode positive), made of steel, and measures 14 inches in length with a 3/32-inch diameter. Available in a 4.1-kilogram package.

This LA 7018 mild-steel electrode is a basic low hydrogen, all-position electrode (E7018-1) used on either DC or AC current. It can obtain code quality welds on higher strength steels with weld-metal toughness properties (charpy impacts) down to -46 Degrees C (-50 Degrees F), when coupled with a low hydrogen weld deposit. It is 14 inches in length with a 5/32-inch diameter, and meets CSA, Class E4918-1-H4 standards. Available in a five-kilogram package.

This LA 7018 mild-steel electrode is a basic low hydrogen, all-position electrode (E7018-1) used on either DC or AC current. It can obtain code quality welds on higher strength steels with weld-metal toughness properties (charpy impacts) down to -46 Degrees C (-50 Degrees F), when coupled with a low hydrogen weld deposit. It is 14 inches in length with a 5/32-inch diameter, and meets CSA, Class E4918-1-H4 standards. Available in a five-kilogram package.

This Hobart 418 mild-steel electrode has an AC, DCEN, and DCEP polarity and provides an X-ray quality weld with a stable arc and low spatter level. It is 14 inches long with an 1/8-inch diameter, and a minimum tensile strength of 70,000 PSI. Meets CSA standards. Available in a 10-pound package.

This Hobart 418 mild-steel electrode has an AC, DCEN, and DCEP polarity and provides an X-ray quality weld with a stable arc and low spatter level. It is 14 inches long with an 1/8-inch diameter, and a minimum tensile strength of 70,000 PSI. Meets CSA standards. Available in a 10-pound package.

This LA 7018 mild-steel electrode is a basic low hydrogen, all-position electrode (E7018-1) used on either DC or AC current. It can obtain code quality welds on higher strength steels with weld-metal toughness properties (charpy impacts) down to -46 Degrees C (-50 Degrees F), when coupled with a low hydrogen weld deposit. It is 18 inches in length with a 3/16-inch diameter, and meets CSA, Class E4918-1-H4 standards. Available in a five-kilogram package.

This LA 7018 mild-steel electrode is a basic low hydrogen, all-position electrode (E7018-1) used on either DC or AC current. It can obtain code quality welds on higher strength steels with weld-metal toughness properties (charpy impacts) down to -46 Degrees C (-50 Degrees F), when coupled with a low hydrogen weld deposit. It is 18 inches in length with a 3/16-inch diameter, and meets CSA, Class E4918-1-H4 standards. Available in a five-kilogram package.

This Sureweld 316L stick electrode is made of stainless steel. In addition, it is for use with: stainless steel to stainless steel. It has an overall length of 14 inches, an overall diameter of 3/32 inches, and weighs five pounds. It can be used for stick welding (SMAW), in positions including flat, horizontal, vertical-down, vertical-up and meets the standards for AWS A5.4.

This Sureweld 316L stick electrode is made of stainless steel. In addition, it is for use with: stainless steel to stainless steel. It has an overall length of 14 inches, an overall diameter of 3/32 inches, and weighs five pounds. It can be used for stick welding (SMAW), in positions including flat, horizontal, vertical-down, vertical-up and meets the standards for AWS A5.4.

This LA 6010, all-position, mild-steel electrode is used for producing very high quality welds and features a cellulosic DC+ covering to produce a forceful, deep-penetrating arc and a thin, friable, easily removed slag. It measures 14 inches in length with an 1/8-inch diameter, and meets CSA W48, Class E4310 standards. Available in a five-kilogram package.

This LA 6010, all-position, mild-steel electrode is used for producing very high quality welds and features a cellulosic DC+ covering to produce a forceful, deep-penetrating arc and a thin, friable, easily removed slag. It measures 14 inches in length with an 1/8-inch diameter, and meets CSA W48, Class E4310 standards. Available in a five-kilogram package.

This Hobart 418AC mild-steel electrode features excellent re-strike capabilities, and is used with AC straight and reverse polarities. It is 14 inches long with an 1/8-inch diameter, and a minimum tensile strength of 70,000 PSI. Meets CSA standards. Available in a 10-pound package.

This Hobart 418AC mild-steel electrode features excellent re-strike capabilities, and is used with AC straight and reverse polarities. It is 14 inches long with an 1/8-inch diameter, and a minimum tensile strength of 70,000 PSI. Meets CSA standards. Available in a 10-pound package.

This OK 55.00 all-position, low-hydrogen, basic steel electrode provides a smooth, stable arc with minimum spatter and is suitable for critical applications requiring exceptional impacts at low temperatures. It is AC-DCEP (electrode positive) with a length of 18 inches and a 1/4-inch diameter. Available in a 6.5-kilogram package.

This OK 55.00 all-position, low-hydrogen, basic steel electrode provides a smooth, stable arc with minimum spatter and is suitable for critical applications requiring exceptional impacts at low temperatures. It is AC-DCEP (electrode positive) with a length of 18 inches and a 1/4-inch diameter. Available in a 6.5-kilogram package.

This Sureweld 7018 stick electrode is made of carbon steel. In addition, it is for use with: carbon steel to carbon steel, carbon steel to low-alloy steel, low-alloy steel to low-alloy steel. It has an overall length of 14 inches, an overall diameter of 1/8 inch, and weighs five pounds. It can be used for stick welding, in positions including flat, horizontal, overhead, vertical-down, vertical-up and meets the standards for AWS A5.1.

This Sureweld 7018 stick electrode is made of carbon steel. In addition, it is for use with: carbon steel to carbon steel, carbon steel to low-alloy steel, low-alloy steel to low-alloy steel. It has an overall length of 14 inches, an overall diameter of 1/8 inch, and weighs five pounds. It can be used for stick welding, in positions including flat, horizontal, overhead, vertical-down, vertical-up and meets the standards for AWS A5.1.

This Hobart 418 mild-steel electrode has an AC, DCEN, and DCEP polarity and provides an X-ray quality weld with a stable arc and low spatter level. It is 14 inches long with a 5/32-inch diameter, and a minimum tensile strength of 70,000 PSI. Meets CSA standards. Available in a 10-pound package.

This Hobart 418 mild-steel electrode has an AC, DCEN, and DCEP polarity and provides an X-ray quality weld with a stable arc and low spatter level. It is 14 inches long with a 5/32-inch diameter, and a minimum tensile strength of 70,000 PSI. Meets CSA standards. Available in a 10-pound package.

This OK 55.00 low-hydrogen, all-position, basic electrode is suitable for critical applications requiring exceptional impacts at low temperatures, and provides a smooth, stable arc with very low spatter. It is AC-DCEP (electrode positive), made of steel, and measures 18 inches in length with an 1/8-inch diameter. Available in a six-kilogram package.

This OK 55.00 low-hydrogen, all-position, basic electrode is suitable for critical applications requiring exceptional impacts at low temperatures, and provides a smooth, stable arc with very low spatter. It is AC-DCEP (electrode positive), made of steel, and measures 18 inches in length with an 1/8-inch diameter. Available in a six-kilogram package.