Screw Anchors

This Tapcon straight shank drill bit is 4 1/2 x 3/16 inches, with a one-inch minimum embedment, a maximum work thickness of 1 3/4 inches, and a 1/4-inch anchor diameter.

This Tapcon straight shank drill bit is 4 1/2 x 3/16 inches, with a one-inch minimum embedment, a maximum work thickness of 1 3/4 inches, and a 1/4-inch anchor diameter.

These Twist-n-Lock E-Z anchors are for use in drywall up to 5/8 inches. These white mini self-drilling anchors have a minimum embedment of 1/2 inches, a 3/4-inch maximum thickness, and a 7/16-inch anchor diameter. These #6 screw anchors are made of nylon.

These Twist-n-Lock E-Z anchors are for use in drywall up to 5/8 inches. These white mini self-drilling anchors have a minimum embedment of 1/2 inches, a 3/4-inch maximum thickness, and a 7/16-inch anchor diameter. These #6 screw anchors are made of nylon.

This Tapcon straight shank drill bit is 4 1/2 x 5/32 inches, with a one-inch minimum embedment, a maximum work thickness of 1 3/4 inches, and a 3/16-inch anchor diameter.

This Tapcon straight shank drill bit is 4 1/2 x 5/32 inches, with a one-inch minimum embedment, a maximum work thickness of 1 3/4 inches, and a 3/16-inch anchor diameter.

This Tapcon straight shank drill bit is 3 1/2 x 3/16 inches, with a one-inch minimum embedment, a maximum work thickness of 3/4 inches, and a 1/4-inch anchor diameter.

This Tapcon straight shank drill bit is 3 1/2 x 3/16 inches, with a one-inch minimum embedment, a maximum work thickness of 3/4 inches, and a 1/4-inch anchor diameter.

These Tapcon screw anchors are for exterior insulation systems and masonry. The anchor is 2 1/4 x 3/16 inches and the drill bit is 4 1/2 x 5/32 inches. These screws have a one-inch minimum embedment and a 1 1/4-inch maximum work thickness, with an ultimate shear of 400 to 730 pounds and an ultimate tension of 220 to 340 pounds. These anchors come in a box of 100.

These Tapcon screw anchors are for exterior insulation systems and masonry. The anchor is 2 1/4 x 3/16 inches and the drill bit is 4 1/2 x 5/32 inches. These screws have a one-inch minimum embedment and a 1 1/4-inch maximum work thickness, with an ultimate shear of 400 to 730 pounds and an ultimate tension of 220 to 340 pounds. These anchors come in a box of 100.

These Tapcon screw anchors have a Phillips head drive and are for exterior insulation systems and masonry. The anchor is 2 3/4 x 3/16 inches and the drill bit is 4 1/2 x 5/32 inches. These screws have a one-inch minimum embedment and a 1 3/4-inch maximum work thickness, with an ultimate shear of 400 to 730 pounds and an ultimate tension of 220 to 340 pounds. These anchors come in a box of 100.

These Tapcon screw anchors have a Phillips head drive and are for exterior insulation systems and masonry. The anchor is 2 3/4 x 3/16 inches and the drill bit is 4 1/2 x 5/32 inches. These screws have a one-inch minimum embedment and a 1 3/4-inch maximum work thickness, with an ultimate shear of 400 to 730 pounds and an ultimate tension of 220 to 340 pounds. These anchors come in a box of 100.

These Tapcon screw anchors have a hex head drive and are for exterior insulation systems and masonry. The anchor is 3 1/4 x 1/4 inches and the drill bit is 5 1/2 x 3/16 inches. These screws have a one-inch minimum embedment and a 2 1/4-inch maximum work thickness, with an ultimate shear of 620 to 1,000 pounds and an ultimate tension of 250 to 500 pounds. These anchors come in a box of 100.

These Tapcon screw anchors have a hex head drive and are for exterior insulation systems and masonry. The anchor is 3 1/4 x 1/4 inches and the drill bit is 5 1/2 x 3/16 inches. These screws have a one-inch minimum embedment and a 2 1/4-inch maximum work thickness, with an ultimate shear of 620 to 1,000 pounds and an ultimate tension of 250 to 500 pounds. These anchors come in a box of 100.

Original masonry anchor that cuts its own threads into concrete, block or brick. Ideal for window and door frame installations and Z bar to masonry.

Original masonry anchor that cuts its own threads into concrete, block or brick. Ideal for window and door frame installations and Z bar to masonry.

These Tapcon screw anchors have a Phillips head drive and are for exterior insulation systems and masonry. The anchor is 2 1/4 x 1/4 inches and the drill bit is 4 1/2 x 3/16 inches. These screws have a one-inch minimum embedment and a 1 1/4-inch maximum work thickness, with an ultimate shear of 620 to 1,000 pounds and an ultimate tension of 250 to 500 pounds. These anchors come in a box of 100.

These Tapcon screw anchors have a Phillips head drive and are for exterior insulation systems and masonry. The anchor is 2 1/4 x 1/4 inches and the drill bit is 4 1/2 x 3/16 inches. These screws have a one-inch minimum embedment and a 1 1/4-inch maximum work thickness, with an ultimate shear of 620 to 1,000 pounds and an ultimate tension of 250 to 500 pounds. These anchors come in a box of 100.

These Tapcon screw anchors have a Phillips head drive and are for exterior insulation systems and masonry. The anchor is 5 x 1/4 inches and the drill bit is 6 1/2 x 3/16 inches. These screws have a one-inch minimum embedment and a four-inch maximum work thickness, with an ultimate shear of 620 to 1,000 pounds and an ultimate tension of 250 to 500 pounds. These anchors come in a box of 100.

These Tapcon screw anchors have a Phillips head drive and are for exterior insulation systems and masonry. The anchor is 5 x 1/4 inches and the drill bit is 6 1/2 x 3/16 inches. These screws have a one-inch minimum embedment and a four-inch maximum work thickness, with an ultimate shear of 620 to 1,000 pounds and an ultimate tension of 250 to 500 pounds. These anchors come in a box of 100.

These Tapcon screw anchors have a Phillips head drive and are for exterior insulation systems and masonry. The anchor is 3 1/4 x 1/4 inches and the drill bit is 5 1/2 x 3/16 inches. These screws have a one-inch minimum embedment and a 2 1/4-inch maximum work thickness, with an ultimate shear of 620 to 1,000 pounds and an ultimate tension of 250 to 500 pounds. These anchors come in a box of 100.

These Tapcon screw anchors have a Phillips head drive and are for exterior insulation systems and masonry. The anchor is 3 1/4 x 1/4 inches and the drill bit is 5 1/2 x 3/16 inches. These screws have a one-inch minimum embedment and a 2 1/4-inch maximum work thickness, with an ultimate shear of 620 to 1,000 pounds and an ultimate tension of 250 to 500 pounds. These anchors come in a box of 100.

These Tapcon screw anchors have a Phillips head drive and are for exterior insulation systems and masonry. The anchor is 2 3/4 x 1/4 inches and the drill bit is 4 1/2 x 3/16 inches. These screws have a one-inch minimum embedment and a 1 3/4-inch maximum work thickness, with an ultimate shear of 620 to 1,000 pounds and an ultimate tension of 250 to 500 pounds. These anchors come in a box of 100.

These Tapcon screw anchors have a Phillips head drive and are for exterior insulation systems and masonry. The anchor is 2 3/4 x 1/4 inches and the drill bit is 4 1/2 x 3/16 inches. These screws have a one-inch minimum embedment and a 1 3/4-inch maximum work thickness, with an ultimate shear of 620 to 1,000 pounds and an ultimate tension of 250 to 500 pounds. These anchors come in a box of 100.

These Tapcon screw anchors have a Phillips head drive and are for exterior insulation systems and masonry. The anchor is 3 1/4 x 3/16 inches and the drill bit is 5 1/2 x 5/32 inches. These screws have a one-inch minimum embedment and a 2 1/4-inch maximum work thickness, with an ultimate shear of 400 to 730 pounds and an ultimate tension of 220 to 340 pounds. These anchors come in a box of 100.

These Tapcon screw anchors have a Phillips head drive and are for exterior insulation systems and masonry. The anchor is 3 1/4 x 3/16 inches and the drill bit is 5 1/2 x 5/32 inches. These screws have a one-inch minimum embedment and a 2 1/4-inch maximum work thickness, with an ultimate shear of 400 to 730 pounds and an ultimate tension of 220 to 340 pounds. These anchors come in a box of 100.

Original masonry anchor that cuts its own threads into concrete, block or brick. Ideal for window and door frame installations and Z bar to masonry.

Original masonry anchor that cuts its own threads into concrete, block or brick. Ideal for window and door frame installations and Z bar to masonry.

These Tapcon screw anchors have a Phillips head drive and are for exterior insulation systems and masonry. The anchor is 1 3/4 x 1/4 inches and the drill bit is 3 1/2 x 3/16 inches. These screws have a one-inch minimum embedment and a 1 3/4-inch maximum work thickness, with an ultimate shear of 620 to 1,000 pounds and an ultimate tension of 250 to 500 pounds. These anchors come in a box of 100.

These Tapcon screw anchors have a Phillips head drive and are for exterior insulation systems and masonry. The anchor is 1 3/4 x 1/4 inches and the drill bit is 3 1/2 x 3/16 inches. These screws have a one-inch minimum embedment and a 1 3/4-inch maximum work thickness, with an ultimate shear of 620 to 1,000 pounds and an ultimate tension of 250 to 500 pounds. These anchors come in a box of 100.

These white self-drilling Twist-n-Lock E-Z anchors have a minimum embedment of 7/8 inches, a 3/4-inch maximum thickness, and a 1/2-inch anchor diameter. These #6 screw anchors are made of nylon and come in a box of 100.

These white self-drilling Twist-n-Lock E-Z anchors have a minimum embedment of 7/8 inches, a 3/4-inch maximum thickness, and a 1/2-inch anchor diameter. These #6 screw anchors are made of nylon and come in a box of 100.