Screw Anchors

These Tapcon screw anchors have a hex head drive and are for exterior insulation systems and masonry. The anchor is 1 3/4 x 1/4 inches and the drill bit is 3 1/2 x 3/16 inches. These screws have a one-inch minimum embedment and a 3/4-inch maximum work thickness, with an ultimate shear of 620 to 1,000 pounds and an ultimate tension of 250 to 500 pounds. These anchors come in a box of 100.

These Tapcon screw anchors have a hex head drive and are for exterior insulation systems and masonry. The anchor is 1 3/4 x 1/4 inches and the drill bit is 3 1/2 x 3/16 inches. These screws have a one-inch minimum embedment and a 3/4-inch maximum work thickness, with an ultimate shear of 620 to 1,000 pounds and an ultimate tension of 250 to 500 pounds. These anchors come in a box of 100.

This screw anchor is made of steel and has a corrosion resistant finish. Plus, it includes #6, #7, #8 screws. This screw anchor is designed for use with drywall.

This screw anchor is made of steel and has a corrosion resistant finish. Plus, it includes #6, #7, #8 screws. This screw anchor is designed for use with drywall.

These Tapcon screw anchors have a hex head drive and are for exterior insulation systems and masonry. The anchor is 2 1/4 x 1/4 inches and the drill bit is 4 1/2 x 3/16 inches. These screws have a one-inch minimum embedment and a 1 1/4-inch maximum work thickness, with an ultimate shear of 620 to 1,000 pounds and an ultimate tension of 250 to 500 pounds. These anchors come in a box of 100.

These Tapcon screw anchors have a hex head drive and are for exterior insulation systems and masonry. The anchor is 2 1/4 x 1/4 inches and the drill bit is 4 1/2 x 3/16 inches. These screws have a one-inch minimum embedment and a 1 1/4-inch maximum work thickness, with an ultimate shear of 620 to 1,000 pounds and an ultimate tension of 250 to 500 pounds. These anchors come in a box of 100.

These Twist-n-Lock E-Z anchors are for use in drywall up to 5/8 inches. These white mini self-drilling anchors have a minimum embedment of 1/2 inches, a 3/4-inch maximum thickness, and a 7/16-inch anchor diameter. These #6 screw anchors are made of nylon.

These Twist-n-Lock E-Z anchors are for use in drywall up to 5/8 inches. These white mini self-drilling anchors have a minimum embedment of 1/2 inches, a 3/4-inch maximum thickness, and a 7/16-inch anchor diameter. These #6 screw anchors are made of nylon.

These white self-drilling Twist-n-Lock E-Z anchors have a minimum embedment of 7/8 inches, a 3/4-inch maximum thickness, and a 1/2-inch anchor diameter. These #6 screw anchors are made of nylon and come in a box of 100.

These white self-drilling Twist-n-Lock E-Z anchors have a minimum embedment of 7/8 inches, a 3/4-inch maximum thickness, and a 1/2-inch anchor diameter. These #6 screw anchors are made of nylon and come in a box of 100.

These Tapcon screw anchors have a hex head drive and are for exterior insulation systems and masonry. The anchor is 3 1/4 x 1/4 inches and the drill bit is 5 1/2 x 3/16 inches. These screws have a one-inch minimum embedment and a 2 1/4-inch maximum work thickness, with an ultimate shear of 620 to 1,000 pounds and an ultimate tension of 250 to 500 pounds. These anchors come in a box of 100.

These Tapcon screw anchors have a hex head drive and are for exterior insulation systems and masonry. The anchor is 3 1/4 x 1/4 inches and the drill bit is 5 1/2 x 3/16 inches. These screws have a one-inch minimum embedment and a 2 1/4-inch maximum work thickness, with an ultimate shear of 620 to 1,000 pounds and an ultimate tension of 250 to 500 pounds. These anchors come in a box of 100.

These Tapcon screw anchors have a hex head drive and are for exterior insulation systems and masonry. The anchor is 4 x 1/4 inches and the drill bit is 5 1/2 x 3/16 inches. These screws have a one-inch minimum embedment and a three-inch maximum work thickness, with an ultimate shear of 620 to 1,000 pounds and an ultimate tension of 250 to 500 pounds. These anchors come in a box of 100.

These Tapcon screw anchors have a hex head drive and are for exterior insulation systems and masonry. The anchor is 4 x 1/4 inches and the drill bit is 5 1/2 x 3/16 inches. These screws have a one-inch minimum embedment and a three-inch maximum work thickness, with an ultimate shear of 620 to 1,000 pounds and an ultimate tension of 250 to 500 pounds. These anchors come in a box of 100.

These Tapcon screw anchors have a torx (star drive head) and are for exterior insulation systems and masonry. The anchor is 1 1/4 x 1/4 inches and the drill bit is 3 1/2 x 3/16 inches. These screws have a one-inch minimum embedment and a 1 1/4-inch maximum work thickness, with an ultimate shear of 620 to 1,000 pounds and an ultimate tension of 250 to 500 pounds.

These Tapcon screw anchors have a torx (star drive head) and are for exterior insulation systems and masonry. The anchor is 1 1/4 x 1/4 inches and the drill bit is 3 1/2 x 3/16 inches. These screws have a one-inch minimum embedment and a 1 1/4-inch maximum work thickness, with an ultimate shear of 620 to 1,000 pounds and an ultimate tension of 250 to 500 pounds.

Masonry anchor cuts its own threads into concrete, block, or brick. Ideal for window and door frame installations and Z bar to masonry. Torx 3/16 inch x 1-1/4 inches.

Masonry anchor cuts its own threads into concrete, block, or brick. Ideal for window and door frame installations and Z bar to masonry. Torx 3/16 inch x 1-1/4 inches.

These Tapcon screw anchors have a Phillips head drive and are for exterior insulation systems and masonry. The anchor is 2 3/4 x 3/16 inches and the drill bit is 4 1/2 x 5/32 inches. These screws have a one-inch minimum embedment and a 1 3/4-inch maximum work thickness, with an ultimate shear of 400 to 730 pounds and an ultimate tension of 220 to 340 pounds. These anchors come in a box of 100.

These Tapcon screw anchors have a Phillips head drive and are for exterior insulation systems and masonry. The anchor is 2 3/4 x 3/16 inches and the drill bit is 4 1/2 x 5/32 inches. These screws have a one-inch minimum embedment and a 1 3/4-inch maximum work thickness, with an ultimate shear of 400 to 730 pounds and an ultimate tension of 220 to 340 pounds. These anchors come in a box of 100.

Original masonry anchor that cuts its own threads into concrete, block or brick. Ideal for window and door frame installations and Z bar to masonry.

Original masonry anchor that cuts its own threads into concrete, block or brick. Ideal for window and door frame installations and Z bar to masonry.

These Tapcon screw anchors have a Phillips head drive and are for exterior insulation systems and masonry. The anchor is 2 1/4 x 1/4 inches and the drill bit is 4 1/2 x 3/16 inches. These screws have a one-inch minimum embedment and a 1 1/4-inch maximum work thickness, with an ultimate shear of 620 to 1,000 pounds and an ultimate tension of 250 to 500 pounds. These anchors come in a box of 100.

These Tapcon screw anchors have a Phillips head drive and are for exterior insulation systems and masonry. The anchor is 2 1/4 x 1/4 inches and the drill bit is 4 1/2 x 3/16 inches. These screws have a one-inch minimum embedment and a 1 1/4-inch maximum work thickness, with an ultimate shear of 620 to 1,000 pounds and an ultimate tension of 250 to 500 pounds. These anchors come in a box of 100.

These Tapcon screw anchors are for exterior insulation systems and masonry. The anchor is 2 1/4 x 3/16 inches and the drill bit is 4 1/2 x 5/32 inches. These screws have a one-inch minimum embedment and a 1 1/4-inch maximum work thickness, with an ultimate shear of 400 to 730 pounds and an ultimate tension of 220 to 340 pounds. These anchors come in a box of 100.

These Tapcon screw anchors are for exterior insulation systems and masonry. The anchor is 2 1/4 x 3/16 inches and the drill bit is 4 1/2 x 5/32 inches. These screws have a one-inch minimum embedment and a 1 1/4-inch maximum work thickness, with an ultimate shear of 400 to 730 pounds and an ultimate tension of 220 to 340 pounds. These anchors come in a box of 100.

These Tapcon screw anchors have a Phillips head drive and are for exterior insulation systems and masonry. The anchor is 2 3/4 x 1/4 inches and the drill bit is 4 1/2 x 3/16 inches. These screws have a one-inch minimum embedment and a 1 3/4-inch maximum work thickness, with an ultimate shear of 620 to 1,000 pounds and an ultimate tension of 250 to 500 pounds. These anchors come in a box of 100.

These Tapcon screw anchors have a Phillips head drive and are for exterior insulation systems and masonry. The anchor is 2 3/4 x 1/4 inches and the drill bit is 4 1/2 x 3/16 inches. These screws have a one-inch minimum embedment and a 1 3/4-inch maximum work thickness, with an ultimate shear of 620 to 1,000 pounds and an ultimate tension of 250 to 500 pounds. These anchors come in a box of 100.

These Tapcon screw anchors have a Phillips head drive and are for exterior insulation systems and masonry. The anchor is 4 x 1/4 inches and the drill bit is 5 1/2 x 3/16 inches. These screws have a one-inch minimum embedment and a three-inch maximum work thickness, with an ultimate shear of 620 to 1,000 pounds and an ultimate tension of 250 to 500 pounds. These anchors come in a box of 100.

These Tapcon screw anchors have a Phillips head drive and are for exterior insulation systems and masonry. The anchor is 4 x 1/4 inches and the drill bit is 5 1/2 x 3/16 inches. These screws have a one-inch minimum embedment and a three-inch maximum work thickness, with an ultimate shear of 620 to 1,000 pounds and an ultimate tension of 250 to 500 pounds. These anchors come in a box of 100.

These Tapcon screw anchors have a Phillips head drive and are for exterior insulation systems and masonry. The anchor is 3 1/4 x 3/16 inches and the drill bit is 5 1/2 x 5/32 inches. These screws have a one-inch minimum embedment and a 2 1/4-inch maximum work thickness, with an ultimate shear of 400 to 730 pounds and an ultimate tension of 220 to 340 pounds. These anchors come in a box of 100.

These Tapcon screw anchors have a Phillips head drive and are for exterior insulation systems and masonry. The anchor is 3 1/4 x 3/16 inches and the drill bit is 5 1/2 x 5/32 inches. These screws have a one-inch minimum embedment and a 2 1/4-inch maximum work thickness, with an ultimate shear of 400 to 730 pounds and an ultimate tension of 220 to 340 pounds. These anchors come in a box of 100.