!
Browser upgrade recommended: Improve your Grainger.ca experience by upgrading your browser to Edge or Chrome. Learn more about our supported browsers.

Filter Results By

Applied Filters
Clear All

Shop By
Brand
Price
Contact Material
Tongue Width
Insulation Material
Maximum Operating Temperature
Insulation Type
Maximum Wire Size
Contact Finish
Minimum Wire Size

Ring Terminals

Ring terminals fasten around bolts or threaded connection posts to create semipermanent connections between wires and circuit points. Also known as ring connectors, they connect power or ground wires to post-type connections in high-vibration applications, such as automobiles, airplanes, and industrial equipment. They have a barrel-shaped body where the stripped conductors fit into. Conductors are either crimped or soldered in the barrel and have a round, tongue-style terminal that's flat and has mounting holes for fastening to connection points.

https://catalogue.grainger.ca/?hybris=true

104 Results Found

In stock at branch(0)
Results per page :  16 | 32 | 48
  • PICO
  • RING CONNECTORS, SHRINK TUBING, 600V, 16-14 GA, STUD SZ 5/16 IN, 4 1/64 IN L, COPPER, PK 25
  • Item # PIC5908-15
  • Mfr. Model # 5908-15
  • EHC: EHC :
  • These ring connectors are designed for a 16- to 14-gauge wire and fit a 5/16-inch stud. These 600-volt connectors are 4 1/64 inches long and can withstand temperatures up to 105 Degrees C. They have heat-shrink tubing insulation and a copper alloy 110 connection with a brazed seam. These connectors come in a pack of 25.

    View more View less

    SDS Document Not Found

    For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

    CATALOGUE PAGE # N/A
  • PICO
  • RING TERMINALS, 600 V, 12-10 GA, STUD SZ 3/8 IN, YELLOW, 4 13/32 IN L, VINYL/COPPER, PK 50
  • Item # PIC1909CS
  • Mfr. Model # 1909-15
  • EHC: EHC :
  • These ring terminals are designed for a 12- to 10-gauge wire and fit a 3/8-inch stud. They have a yellow flared vinyl insulation and a tin-plated copper crimp connection with a butted seam. These 600-volt ring terminals are 4 13/32 inches long and can withstand temperatures up to 75 Degrees C. They meet CSA standards and come in a pack of 50.

    View more View less

    SDS Document Not Found

    For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

    CATALOGUE PAGE # N/A
  • PICO
  • RING CONNECTORS, SHRINK TUBING, 600V, 12-10 GA, STUD SZ 1/4 IN, 4 13/32 IN L, COPPER, PK 25
  • Item # PIC6006-15
  • Mfr. Model # 6006-15
  • EHC: EHC :
  • These ring connectors are designed for a 12- to 10-gauge wire and fit a 1/4-inch stud. These 600-volt connectors are 4 13/32 inches long and can withstand temperatures up to 105 Degrees C. They have heat-shrink tubing insulation and a copper alloy 110 connection with a brazed seam. These connectors come in a pack of 25.

    View more View less

    SDS Document Not Found

    For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

    CATALOGUE PAGE # N/A
  • PICO
  • RING TERMINALS, 600 V, 12-10 GA, STUD SZ 1/2 IN, YELLOW, 4 13/32 IN L, VINYL/COPPER, PK 50
  • Item # PIC1913-15
  • Mfr. Model # 1913-15
  • EHC: EHC :
  • These ring terminals are designed for a 12- to 10-gauge wire and fit a 1/2-inch stud. They have a yellow flared vinyl insulation and a tin-plated copper crimp connection with a butted seam. These 600-volt ring terminals are 4 13/32 inches long and can withstand temperatures up to 75 Degrees C. They meet CSA standards and come in a pack of 50.

    View more View less

    SDS Document Not Found

    For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

    CATALOGUE PAGE # N/A
  • PICO
  • RING CONNECTORS, NON-INSULATED, 600 V, 16-14 GA, STUD SZ #10, 4 1/64 IN L, COPPER, PK 100
  • Item # PIC2405CS
  • Mfr. Model # 2405CS
  • EHC: EHC :
  • These non-insulated ring connectors are designed for a 16- to 14-gauge wire and fit a number 10 stud. These 600-volt connectors are 4 1/64 inches long and can withstand temperatures up to 75 Degrees C. They have a copper alloy 110 connection with a butted seam. These connectors meet CSA standards and come in a pack of 100.

    View more View less

    SDS Document Not Found

    For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

    CATALOGUE PAGE # N/A
  • PICO
  • RING CONNECTORS, NON-INSULATED, 600 V, 16-14 GA, STUD SZ 1/4 IN, 4 13/32 IN L, COPPER, PK 100
  • Item # PIC2406CS
  • Mfr. Model # 2406CS
  • EHC: EHC :
  • These non-insulated ring connectors are designed for a 16- to 14-gauge wire and fit a 1/4-inch stud. These 600-volt connectors are 4 13/32 inches long and can withstand temperatures up to 75 Degrees C. They have a copper alloy 110 connection with a butted seam. These connectors meet CSA standards and come in a pack of 100.

    View more View less

    SDS Document Not Found

    For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

    CATALOGUE PAGE # N/A
  • PICO
  • RING CONNECTORS, NON-INSULATED, BUTTED, 600 V, 12-10 GA, STUD SZ #8, COPPER, PK 100
  • Item # PIC2504CS
  • Mfr. Model # 2504CS
  • EHC: EHC :
  • These non-insulated ring connectors are designed for a 12- to 10-gauge wire and fit a number eight stud. These 600-volt connectors are 4 1/64 inches long and can withstand temperatures up to 75 Degrees C. They have a copper alloy 110 connection with a butted seam. These connectors meet CSA standards and come in a pack of 100.

    View more View less

    SDS Document Not Found

    For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

    CATALOGUE PAGE # N/A
  • PICO
  • RING CONNECTORS, SHRINK TUBING, 600V, 12-10 GA, STUD SZ 5/16 IN, 4 13/32 IN L, COPPER, PK 25
  • Item # PIC6008-15
  • Mfr. Model # 6008-15
  • EHC: EHC :
  • These ring connectors are designed for a 12- to 10-gauge wire and fit a 5/16-inch stud. These 600-volt connectors are 4 13/32 inches long and can withstand temperatures up to 105 Degrees C. They have yellow heat-shrink tubing insulation and a copper alloy 110 connection with a brazed seam. These connectors come in a pack of 25.

    View more View less

    SDS Document Not Found

    For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

    CATALOGUE PAGE # N/A
  • PICO
  • RING CONNECTORS, SHRINK TUBING, 600V, 12-10 GA, STUD SZ #10, 4 1/64 IN L, COPPER, PK 25
  • Item # PIC6005-15
  • Mfr. Model # 6005-15
  • EHC: EHC :
  • These ring connectors are designed for a 12- to 10-gauge wire and fit a number 10 stud. These 600-volt connectors are 4 1/64 inches long and can withstand temperatures up to 105 Degrees C. They have heat-shrink tubing insulation and a copper alloy 110 connection with a brazed seam. These connectors come in a pack of 25.

    View more View less

    SDS Document Not Found

    For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

    CATALOGUE PAGE # N/A
  • PICO
  • RING TERMINALS, NON-INSULATED, BUTTED, 600 V, 12-10 GA, STUD SZ 3/8 IN, COPPER, PK 100
  • Item # PIC2509CS
  • Mfr. Model # 2509CS
  • EHC: EHC :
  • These non-insulated ring terminals are designed for a 12- to 10-gauge wire and fit a 3/8-inch stud. These 600-volt terminals are 4 13/32 inches long and can withstand temperatures up to 75 Degrees C. They have a copper alloy 110 connection with a butted seam. These terminals meet CSA standards and come in a pack of 100.

    View more View less

    SDS Document Not Found

    For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

    CATALOGUE PAGE # N/A
  • PICO
  • RING CONNECTORS, NON-INSULATED, BUTTED, 600 V, 12-10 GA, STUD SZ #10, COPPER, PK 100
  • Item # PIC2505CS
  • Mfr. Model # 2505CS
  • EHC: EHC :
  • These non-insulated ring connectors are designed for a 12- to 10-gauge wire and fit a number 10 stud. These 600-volt connectors are 4 13/32 inches long and can withstand temperatures up to 75 Degrees C. They have a copper alloy 110 connection with a butted seam. These connectors meet CSA standards and come in a pack of 100.

    View more View less

    SDS Document Not Found

    For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

    CATALOGUE PAGE # N/A
  • PICO
  • LUG RING, BRAZED, NON-INSULATED, 1083 ° C, 8 GA, 5/16 IN STUD, 4 IN LENGTH, COPPER/TIN, PK 25
  • Item # PIC4008PK
  • Mfr. Model # 4008PK
  • EHC: EHC :
  • This non-insulated, starter/ground lug ring is designed for eight-gauge wire, fits a 5/16-inch stud, and is four inches long. It can withstand a maximum temperature of 1083 Degrees C. Made of copper alloy 110 with electro-tin plating, and a brazed seam, this item comes 25 per pack.

    View more View less

    SDS Document Not Found

    For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

    CATALOGUE PAGE # N/A
  • PICO
  • RING TERMINALS, NON-INSULATED, BRAZED, 600 V, 16-14 GA, STUD SZ #10, COPPER, PK 100
  • Item # PIC2705CS
  • Mfr. Model # 2705CS
  • EHC: EHC :
  • These non-insulated ring terminals are designed for a 16- to 14-gauge wire and fit a number 10 stud. These 600-volt terminals are 4 1/64 inches long and can withstand temperatures up to 75 Degrees C. They have a copper alloy 110 connection with a brazed seam. These terminals meet CSA standards and come in a pack of 100.

    View more View less

    SDS Document Not Found

    For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

    CATALOGUE PAGE # N/A
  • PICO
  • RING TERMINALS, 600 V, 16-14 GA, STUD SZ #8, 4 13/32 IN L, NYLON/COPPER/BRASS, PK 100
  • Item # PIC3004CS
  • Mfr. Model # 3004CS
  • EHC: EHC :
  • These ring terminals are designed for a 16- to 14-gauge wire and fit a number eight stud. These 600-volt terminals are 4 13/32 inches long and can withstand temperatures up to 75 Degrees C. They have nylon insulation and a copper alloy 110 connection with a butted seamless brass end. These terminals come in a pack of 100.

    View more View less

    SDS Document Not Found

    For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

    CATALOGUE PAGE # N/A
  • PICO
  • LUG RING, TUBULAR, NON-INSULATED, 1083 ° C, 8 GA, 5/16 IN STUD, 4 IN LENGTH, COPPER/TIN, PK 25
  • Item # PIC4038PK
  • Mfr. Model # 4038PK
  • EHC: EHC :
  • This non-insulated, starter/ground lug ring is designed for eight-gauge wire, fits a 5/16-inch stud, and is four inches in length. Made of copper alloy 110 with electro-tin plating, and a tubular seam, this item comes 25 per pack. It can withstand a maximum temperature of 1083 Degrees C.

    View more View less

    SDS Document Not Found

    For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

    CATALOGUE PAGE # N/A
  • PICO
  • RING TERMINALS, 600 V, 22-18 GA, STUD SZ #10, 4 13/32 IN L, NYLON/COPPER/BRASS, PK 100
  • Item # PIC2905CS
  • Mfr. Model # 2905CS
  • EHC: EHC :
  • These ring terminals are designed for a 22- to 18-gauge wire and fit a number 10 stud. These 600-volt terminals are 4 13/32 inches long and can withstand temperatures up to 75 Degrees C. They have nylon insulation and a copper alloy 110 connection with a butted seamless brass end. These terminals come in a pack of 100.

    View more View less

    SDS Document Not Found

    For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

    CATALOGUE PAGE # N/A
Results per page :  16 | 32 | 48

Add to Order List

Your items were added

Your items were added to some lists

Max quantity exceeded. The item could not be added to the following List(s)

No Existing List Found. Please Create New List below.

Your list has been created

Please select a list