Repair Putties

This putty is black in colour and comes in a four ounce stick. It is designed for use on metal repair and meets the standards for NSF/ANSI 61. This putty has a working time of three minutes.

This putty is black in colour and comes in a four ounce stick. It is designed for use on metal repair and meets the standards for NSF/ANSI 61. This putty has a working time of three minutes.

This epoxy putty is grey and comes in a two ounce stick. It is designed for use on automotive, exhaust systems, household repairs, machine parts, plumbing, rust damage, stripped threads and meets the standards for 29 CFR 1910.1200, OSHA Hazard Communication Standard. This epoxy putty has a working time of five minutes.

This epoxy putty is grey and comes in a two ounce stick. It is designed for use on automotive, exhaust systems, household repairs, machine parts, plumbing, rust damage, stripped threads and meets the standards for 29 CFR 1910.1200, OSHA Hazard Communication Standard. This epoxy putty has a working time of five minutes.

This putty is black, grey and comes in a four ounce stick. It is designed for use on aluminum gear housing, fill abandoned drill holes in aluminum, insulate wire connections, rebuild, repair zinc, replace broken knob on drill press, seal stainless steel electrical panel, secure wire nuts, steel, stop leaking drum and meets the standards for ASTM. This putty has a working time of three minutes.

This putty is black, grey and comes in a four ounce stick. It is designed for use on aluminum gear housing, fill abandoned drill holes in aluminum, insulate wire connections, rebuild, repair zinc, replace broken knob on drill press, seal stainless steel electrical panel, secure wire nuts, steel, stop leaking drum and meets the standards for ASTM. This putty has a working time of three minutes.

J-B Weld WaterWeld will plug or seal leaks and patch holes and cracks in almost anything. Ideal for repairing plumbing, fuel tanks, tub and shower, drains, pool and spa, boats and potable water tanks: setup occurs even under water. After curing, it can be drilled, tapped, filed, sanded and painted. WaterWeld has a set time of 15-25 minutes and sets hard in one hour. WaterWeld cures to an off-white color, is rated at a tensile strength of 1300 PSI and will withstand temperatures up to 300 Degrees

J-B Weld WaterWeld will plug or seal leaks and patch holes and cracks in almost anything. Ideal for repairing plumbing, fuel tanks, tub and shower, drains, pool and spa, boats and potable water tanks: setup occurs even under water. After curing, it can be drilled, tapped, filed, sanded and painted. WaterWeld has a set time of 15-25 minutes and sets hard in one hour. WaterWeld cures to an off-white color, is rated at a tensile strength of 1300 PSI and will withstand temperatures up to 300 Degrees

Plastic steel putty (A) is metal filled and bonds to most metal, concrete, and some plastics. Cures at room temperature. Can be drilled, tapped, machined, or painted. Resistant to oil, gasoline, water, and many chemicals, 1 lb.

Plastic steel putty (A) is metal filled and bonds to most metal, concrete, and some plastics. Cures at room temperature. Can be drilled, tapped, machined, or painted. Resistant to oil, gasoline, water, and many chemicals, 1 lb.

J-B Weld HighHeat is a hand mixable epoxy putty stick formulated to bond and repair materials that will be exposed to high temperatures in automotive and industrial maintenance applications. It cures to a tough, hard bond with little to no shrinkage. This industrial-strength product sets in 1 hour at room temperature. After 8 hours, it can be drilled, tapped, machined, ground, filed and painted. It is able to withstand continuous heat exposure of 400 Degrees F and intermittent heat up to 550 Deg

J-B Weld HighHeat is a hand mixable epoxy putty stick formulated to bond and repair materials that will be exposed to high temperatures in automotive and industrial maintenance applications. It cures to a tough, hard bond with little to no shrinkage. This industrial-strength product sets in 1 hour at room temperature. After 8 hours, it can be drilled, tapped, machined, ground, filed and painted. It is able to withstand continuous heat exposure of 400 Degrees F and intermittent heat up to 550 Deg

Plastic steel putty (SF) is a fast-curing, steel filled epoxy for emergency repairs in under one hour. Cures in five minutes. Mixes, applies, and cures at temperatures as low as 40 degrees F. Can be machine, drilled, tapped or sanded, 1 lb.

Plastic steel putty (SF) is a fast-curing, steel filled epoxy for emergency repairs in under one hour. Cures in five minutes. Mixes, applies, and cures at temperatures as low as 40 degrees F. Can be machine, drilled, tapped or sanded, 1 lb.

This putty is green, white and comes in a four ounce stick. It is designed for use on dings in fiberglass, fiberglass fixtures, fill cracks, form missing corners, holes in ceramic, re-attach, seal holes, seal leaks in water tanks, secure loose hardware, shape, waterproof fittings and meets the standards for ASTM. This putty has a working time of 20 minutes.

This putty is green, white and comes in a four ounce stick. It is designed for use on dings in fiberglass, fiberglass fixtures, fill cracks, form missing corners, holes in ceramic, re-attach, seal holes, seal leaks in water tanks, secure loose hardware, shape, waterproof fittings and meets the standards for ASTM. This putty has a working time of 20 minutes.

Aluminum putty (F) is for non-rusting repairs to aluminum castings, machinery and equipment. Resistant to chlorofluorocarbons, bonds to aluminum, fills porosity. Can be machined, drilled or tapped. Qualified under Mil Spec DOD-C-2417B (SH), type II, 1 lb.

Aluminum putty (F) is for non-rusting repairs to aluminum castings, machinery and equipment. Resistant to chlorofluorocarbons, bonds to aluminum, fills porosity. Can be machined, drilled or tapped. Qualified under Mil Spec DOD-C-2417B (SH), type II, 1 lb.

Titanium reinforced epoxy putty is designed for making repairs to machinery and equipment that can be precision machined. High temperature resistance 350 degrees F. High compressive strength 18800 PSI. Qualified under Mil Spec DOD-C-24176 (SH) type I, II.

Titanium reinforced epoxy putty is designed for making repairs to machinery and equipment that can be precision machined. High temperature resistance 350 degrees F. High compressive strength 18800 PSI. Qualified under Mil Spec DOD-C-24176 (SH) type I, II.

This putty is grey and tan and comes in a four ounce tube. It is designed for use on plumbing repair and meets the standards for 29 CFR 1910.1200. This putty has a working time of 15 minutes.

This putty is grey and tan and comes in a four ounce tube. It is designed for use on plumbing repair and meets the standards for 29 CFR 1910.1200. This putty has a working time of 15 minutes.

This putty is grey and comes in a two pound container It is designed for use on hydraulic rams, parts that require a machined finish, rebuild wear rings, repair equipment, restore bearing housings, scored shafts, valves and meets the standards for ASTM. This putty has a working time of.

This putty is grey and comes in a two pound container It is designed for use on hydraulic rams, parts that require a machined finish, rebuild wear rings, repair equipment, restore bearing housings, scored shafts, valves and meets the standards for ASTM. This putty has a working time of.

This putty is grey and comes in a eight ounce can. It is designed for use on metal repair and meets the standards for ASTM D4060, ASTM E1640, and ISO 604. This putty has a working time of 30 minutes.

This putty is grey and comes in a eight ounce can. It is designed for use on metal repair and meets the standards for ASTM D4060, ASTM E1640, and ISO 604. This putty has a working time of 30 minutes.

Flexane 94 liquid is a castable, non-shrinking, low-viscosity (6,000 cps) urethane compound that cures to a rigid rubber material (Hardness Shore A 94). Makes flexible molds and non-scratching holding fixtures. Demolds in less than five hours, 1 lb.

Flexane 94 liquid is a castable, non-shrinking, low-viscosity (6,000 cps) urethane compound that cures to a rigid rubber material (Hardness Shore A 94). Makes flexible molds and non-scratching holding fixtures. Demolds in less than five hours, 1 lb.

Fibreglass resin is compatible with all paints, including gel coat and marine paints. The one-quart container is waterproof and may be sand-able in less than two hours. It can even be used as a sealer on damaged and rotted wood.

Fibreglass resin is compatible with all paints, including gel coat and marine paints. The one-quart container is waterproof and may be sand-able in less than two hours. It can even be used as a sealer on damaged and rotted wood.