Pneumatic and Tire Style Casters

Use these non-marking, flat-free casters to support loads of up to 280 pounds. This swivel caster has a UV- and chemical-resistant polyurethane wheel eight inches in diameter with a two-inch thick and two-inch wide ribbed tread. The semi-pneumatic wheel is supported by a zinc frame with a top plate and 3/8-inch diameter bolt holes. The bolt holes are spaced 2 5/8 inches by three inches inside and three inches by 3 5/8 inches outside.

Use these non-marking, flat-free casters to support loads of up to 280 pounds. This swivel caster has a UV- and chemical-resistant polyurethane wheel eight inches in diameter with a two-inch thick and two-inch wide ribbed tread. The semi-pneumatic wheel is supported by a zinc frame with a top plate and 3/8-inch diameter bolt holes. The bolt holes are spaced 2 5/8 inches by three inches inside and three inches by 3 5/8 inches outside.

Use these non-marking, flat-free casters to support loads of up to 450 pounds. This rigid caster has a UV- and chemical-resistant polyurethane wheel 12 inches in diameter with a four-inch thick and 3 1/2-inch wide ribbed tread. The semi-pneumatic wheel is supported by a zinc frame with a top plate and 3/8-inch diameter bolt holes. The bolt holes are spaced 2 5/8 inches by three inches inside and three inches by 3 5/8 inches outside.

Use these non-marking, flat-free casters to support loads of up to 450 pounds. This rigid caster has a UV- and chemical-resistant polyurethane wheel 12 inches in diameter with a four-inch thick and 3 1/2-inch wide ribbed tread. The semi-pneumatic wheel is supported by a zinc frame with a top plate and 3/8-inch diameter bolt holes. The bolt holes are spaced 2 5/8 inches by three inches inside and three inches by 3 5/8 inches outside.

Pneumatic wheel caster, wheel diameter 10 inches, load rating 350 inches, overall height 12 inches, caster type swivel. Designed to absorb shock and vibration caused by floor obstruction or outdoor terrain.

Pneumatic wheel caster, wheel diameter 10 inches, load rating 350 inches, overall height 12 inches, caster type swivel. Designed to absorb shock and vibration caused by floor obstruction or outdoor terrain.

Look and perform like rubber air-filled pneumatic tires. Non-marking and UV resistant. Wheels are available in 6 inch to 12inch with symmetric hub, and 10 inch with offset hub. 16 inch ribbed tread tire for wheelbarrows.

Look and perform like rubber air-filled pneumatic tires. Non-marking and UV resistant. Wheels are available in 6 inch to 12inch with symmetric hub, and 10 inch with offset hub. 16 inch ribbed tread tire for wheelbarrows.

Use these non-marking, flat-free casters to support loads of up to 450 pounds. This swivel caster has a UV- and chemical-resistant polyurethane wheel 12 inches in diameter with a four-inch thick and 3 1/2-inch wide ribbed tread. The semi-pneumatic wheel is supported by a zinc frame with a top plate and 3/8-inch diameter bolt holes. The bolt holes are spaced 2 5/8 inches by three inches inside and three inches by 3 5/8 inches outside.

Use these non-marking, flat-free casters to support loads of up to 450 pounds. This swivel caster has a UV- and chemical-resistant polyurethane wheel 12 inches in diameter with a four-inch thick and 3 1/2-inch wide ribbed tread. The semi-pneumatic wheel is supported by a zinc frame with a top plate and 3/8-inch diameter bolt holes. The bolt holes are spaced 2 5/8 inches by three inches inside and three inches by 3 5/8 inches outside.

Look and perform like rubber air-filled pneumatic tires. Non-marking and UV resistant. Wheels are available in 6 inch to 12 inch with symmetric hub, and 10 inch with offset hub. 16 inch ribbed tread tire for wheelbarrows.

Look and perform like rubber air-filled pneumatic tires. Non-marking and UV resistant. Wheels are available in 6 inch to 12 inch with symmetric hub, and 10 inch with offset hub. 16 inch ribbed tread tire for wheelbarrows.

Use these non-marking, flat-free casters to support loads of up to 250 pounds. This rigid caster has a UV- and chemical-resistant polyurethane wheel six inches in diameter with a two-inch-thick and two-inch-wide ribbed tread. The semi-pneumatic wheel is supported by a zinc frame with a top plate and 3/8-inch diameter bolt holes. The bolt holes are spaced 2 5/8 inches by three inches inside and three inches by 3 5/8 inches outside.

Use these non-marking, flat-free casters to support loads of up to 250 pounds. This rigid caster has a UV- and chemical-resistant polyurethane wheel six inches in diameter with a two-inch-thick and two-inch-wide ribbed tread. The semi-pneumatic wheel is supported by a zinc frame with a top plate and 3/8-inch diameter bolt holes. The bolt holes are spaced 2 5/8 inches by three inches inside and three inches by 3 5/8 inches outside.

Use these non-marking, flat-free casters to support loads of up to 300 pounds. This swivel caster has a UV- and chemical-resistant polyurethane wheel 10 inches in diameter with a 3 1/2-inch thick and 3 1/2-inch wide ribbed tread. The semi-pneumatic wheel is supported by a zinc frame with a top plate and 3/8-inch diameter bolt holes. The bolt holes are spaced 2 5/8 inches by three inches inside and three inches by 3 5/8 inches outside.

Use these non-marking, flat-free casters to support loads of up to 300 pounds. This swivel caster has a UV- and chemical-resistant polyurethane wheel 10 inches in diameter with a 3 1/2-inch thick and 3 1/2-inch wide ribbed tread. The semi-pneumatic wheel is supported by a zinc frame with a top plate and 3/8-inch diameter bolt holes. The bolt holes are spaced 2 5/8 inches by three inches inside and three inches by 3 5/8 inches outside.

Use these non-marking, flat-free casters to support loads of up to 300 pounds. This rigid caster has a UV- and chemical-resistant polyurethane wheel 10 inches in diameter with a 3 1/2 inches thick and 3 1/2 inches wide ribbed tread. The semi-pneumatic wheel is supported by a zinc frame with a top plate and 3/8 inches in diameter bolt holes. The bolt holes are spaced 2 5/8 inches by three inches inside and three inches by 3 5/8 inches outside.

Use these non-marking, flat-free casters to support loads of up to 300 pounds. This rigid caster has a UV- and chemical-resistant polyurethane wheel 10 inches in diameter with a 3 1/2 inches thick and 3 1/2 inches wide ribbed tread. The semi-pneumatic wheel is supported by a zinc frame with a top plate and 3/8 inches in diameter bolt holes. The bolt holes are spaced 2 5/8 inches by three inches inside and three inches by 3 5/8 inches outside.

Absorbs shock and vibration to safely carry loads of up to 450 pounds, this pneumatic swivel caster has a wheel with a tire rim measuring six inches in diameter and a ribbed tread 3 1/2 inches thick and three inches wide, for a full diameter of 10 inches. The zinc frame has a double ball raceway and a top plate. The bolt holes have an inside spacing of 2 5/16 inches and three inches, and an outside spacing of three inches and 3 5/8 inches.

Absorbs shock and vibration to safely carry loads of up to 450 pounds, this pneumatic swivel caster has a wheel with a tire rim measuring six inches in diameter and a ribbed tread 3 1/2 inches thick and three inches wide, for a full diameter of 10 inches. The zinc frame has a double ball raceway and a top plate. The bolt holes have an inside spacing of 2 5/16 inches and three inches, and an outside spacing of three inches and 3 5/8 inches.

Pneumatic wheel caster, wheel diameter 12 inches, load rating 450 inches, overall height 15 inches, caster type rigid. Designed to absorb shock and vibration caused by floor obstruction or outdoor terrain.

Pneumatic wheel caster, wheel diameter 12 inches, load rating 450 inches, overall height 15 inches, caster type rigid. Designed to absorb shock and vibration caused by floor obstruction or outdoor terrain.

This heavy-duty, flat-free caster has a capacity of 500 pounds. Built with a UV- and chemical-resistant polyurethane wheel 16 inches in diameter with a four-inch thick and four-inch wide ribbed tread. The semi-pneumatic wheel is supported by a zinc frame with a precision ball bearing and a mounting bolt bore diameter of 5/8 inches.

This heavy-duty, flat-free caster has a capacity of 500 pounds. Built with a UV- and chemical-resistant polyurethane wheel 16 inches in diameter with a four-inch thick and four-inch wide ribbed tread. The semi-pneumatic wheel is supported by a zinc frame with a precision ball bearing and a mounting bolt bore diameter of 5/8 inches.

Use these non-marking, flat-free casters to support loads of up to 280 pounds. This rigid caster has a UV- and chemical-resistant polyurethane wheel eight inches in diameter with a two-inch thick and two-inch wide ribbed tread. The semi-pneumatic wheel is supported by a zinc frame with a top plate and 3/8-inch diameter bolt holes. The bolt holes are spaced 2 5/8 inches by three inches inside and three inches by 3 5/8 inches outside.

Use these non-marking, flat-free casters to support loads of up to 280 pounds. This rigid caster has a UV- and chemical-resistant polyurethane wheel eight inches in diameter with a two-inch thick and two-inch wide ribbed tread. The semi-pneumatic wheel is supported by a zinc frame with a top plate and 3/8-inch diameter bolt holes. The bolt holes are spaced 2 5/8 inches by three inches inside and three inches by 3 5/8 inches outside.

This heavy duty, flat-free caster has a capacity of 300 pounds, Built with a UV- and chemical-resistant polyurethane wheel 10 inches in diameter with a 3 1/2-inch thick and 3 1/2-inch wide ribbed tread. The semi-pneumatic wheel is supported by a zinc frame with a precision ball bearing and a mounting bolt bore diameter of 1/2-inch.

This heavy duty, flat-free caster has a capacity of 300 pounds, Built with a UV- and chemical-resistant polyurethane wheel 10 inches in diameter with a 3 1/2-inch thick and 3 1/2-inch wide ribbed tread. The semi-pneumatic wheel is supported by a zinc frame with a precision ball bearing and a mounting bolt bore diameter of 1/2-inch.