These single-channel surface raceways are nonmetallic. They can install both indoors and outdoors and are suited for spaces that are out of reach or have low amounts of traffic, where they are unlikely to be disturbed. They're more lightweight than metallic raceways to facilitate installations. These raceways mount on walls and ceilings, and route wire and cable throughout an area. Wire and cable are laid into the raceways, keeping the conductors from being exposed and preventing kinks. They have a single channel, so they're ideal for simple installations where wire and cable don't need to be separated. These raceways are commonly installed in educational facilities, offices, and hospitals and are used with communication, power, and low-voltage data cable. Individual components in raceway systems must be purchased from the same brand and series to ensure compatibility.
This PP1, PL1, PW2 box is made of PVC, and is off white. It features eliminates need to order three separate boxes. In addition, it meets the standards for CSA standard C22.2 No. 62, E118895/E11919, UL standard UL 5A. It has length of 5 1/3 inches, width of 5 1/3 inches, and a height of 1 2/7 inch. It is for use with PolyTrak series raceways.
This PP1, PL1, PW2 box is made of PVC, and is off white. It features eliminates need to order three separate boxes. In addition, it meets the standards for CSA standard C22.2 No. 62, E118895/E11919, UL standard UL 5A. It has length of 5 1/3 inches, width of 5 1/3 inches, and a height of 1 2/7 inch. It is for use with PolyTrak series raceways.
This PremiseTrak splice cover is made of PVC, and is off white. It features for right angle turns on same surface. In addition, it meets the standards for CSA standard C22.2 No. 62, E118895/E119190, UL standard UL 5A. It has length of one inch, width of 8/9 inch, and a height of ¾-inch. It is for use with PremiseTrak series raceways.
This PremiseTrak splice cover is made of PVC, and is off white. It features for right angle turns on same surface. In addition, it meets the standards for CSA standard C22.2 No. 62, E118895/E119190, UL standard UL 5A. It has length of one inch, width of 8/9 inch, and a height of ¾-inch. It is for use with PremiseTrak series raceways.
This PN05 blank end fitting is made of non-metallic, and is ivory-coloured. It includes one blank end fitting. In addition, it meets the standards for UL listed. It also has snap-on mounting.
This PN05 blank end fitting is made of non-metallic, and is ivory-coloured. It includes one blank end fitting. In addition, it meets the standards for UL listed. It also has snap-on mounting.
This 2300 wire clip is made of PVC, and is ivory-coloured. It features holds conductors in place, and includes one wire clip. In addition, it meets the standards for UL and CSA. It also has snap-on mounting.
This 2300 wire clip is made of PVC, and is ivory-coloured. It features holds conductors in place, and includes one wire clip. In addition, it meets the standards for UL and CSA. It also has snap-on mounting.
This T-45 junction box is made of PVC, and is off white. It features single gang two-piece snap together outlet box with adhesive backing. In addition, it meets the standards for RoHS. It has length of five inches, width of 3.26 inch, and a height of 1.62 inch. It is for use with Pan-Way T-45 or LD profile raceways.
This T-45 junction box is made of PVC, and is off white. It features single gang two-piece snap together outlet box with adhesive backing. In addition, it meets the standards for RoHS. It has length of five inches, width of 3.26 inch, and a height of 1.62 inch. It is for use with Pan-Way T-45 or LD profile raceways.
This T-70 tee is made of PVC, and is off white. It features Workstation Outlet Centre offset box, and includes one tee. In addition, it meets the standards for CE compliant, UL listed, UL 5A. It also has snap-on mounting.
This T-70 tee is made of PVC, and is off white. It features Workstation Outlet Centre offset box, and includes one tee. In addition, it meets the standards for CE compliant, UL listed, UL 5A. It also has snap-on mounting.
This PremiseTrak raceway is made of non-metallic, and is white. It includes base, cover. In addition, it meets the standards for UL 5A. It has length of five feet, width of 0.75 inches, and a height of 0.68 inch. It is for use with PremiseTrak series raceways, can be used outdoors. It also has adhesive mounting.
This PremiseTrak raceway is made of non-metallic, and is white. It includes base, cover. In addition, it meets the standards for UL 5A. It has length of five feet, width of 0.75 inches, and a height of 0.68 inch. It is for use with PremiseTrak series raceways, can be used outdoors. It also has adhesive mounting.
This PremiseTrak internal elbow fitting is made of non-metallic, and is off white. It features for inside surfaces at right angles. In addition, it meets the standards for CSA standard C22.2 No. 62, E118895/E119190, UL standard UL 5A.
This PremiseTrak internal elbow fitting is made of non-metallic, and is off white. It features for inside surfaces at right angles. In addition, it meets the standards for CSA standard C22.2 No. 62, E118895/E119190, UL standard UL 5A.
This PT1 box is made of PVC, and is off white. It features eliminates need to order three separate boxes. In addition, it meets the standards for CSA standard C22.2 No. 62, E118895/E11919, UL standard UL 5A. It has length of 5.06 inch, width of 1.91 inch, and a height of 4.9 inch. It is for use with PolyTrak series raceways.
This PT1 box is made of PVC, and is off white. It features eliminates need to order three separate boxes. In addition, it meets the standards for CSA standard C22.2 No. 62, E118895/E11919, UL standard UL 5A. It has length of 5.06 inch, width of 1.91 inch, and a height of 4.9 inch. It is for use with PolyTrak series raceways.
This PN03 tee fitting is made of non-metallic, and is ivory-coloured. It includes one tee. In addition, it meets the standards for UL listed. It also has snap-on mounting.
This PN03 tee fitting is made of non-metallic, and is ivory-coloured. It includes one tee. In addition, it meets the standards for UL listed. It also has snap-on mounting.
This PT1 lighting fixture box is made of PVC, and is off white. It features reduces inventory requirements, eliminates need to order three separate boxes. In addition, it meets the standards for CSA standard C22.2 No. 62, E118895/E119190, UL standard UL 5A. It has length of 5 1/3 inches, width of 5 1/3 inches, and a height of 1.04 inch. It is for use with non-metallic PolyTrak series raceways.
This PT1 lighting fixture box is made of PVC, and is off white. It features reduces inventory requirements, eliminates need to order three separate boxes. In addition, it meets the standards for CSA standard C22.2 No. 62, E118895/E119190, UL standard UL 5A. It has length of 5 1/3 inches, width of 5 1/3 inches, and a height of 1.04 inch. It is for use with non-metallic PolyTrak series raceways.
This PN05 raceway is made of non-metallic, and is ivory-coloured. In addition, it meets the standards for PEP and RoHS. It has length of 96 inches, width of 1 1/eight inches, and a height of 5/8-inch. It can be used outdoors. It also has adhesive mounting.
This PN05 raceway is made of non-metallic, and is ivory-coloured. In addition, it meets the standards for PEP and RoHS. It has length of 96 inches, width of 1 1/eight inches, and a height of 5/8-inch. It can be used outdoors. It also has adhesive mounting.
This PN03 raceway is made of non-metallic, and is ivory-coloured. In addition, it meets the standards for PEP. It has length of 96 inches, width of 13/16 inch, and a height of ½ inch. It can be used outdoors. It also has adhesive mounting.
This PN03 raceway is made of non-metallic, and is ivory-coloured. In addition, it meets the standards for PEP. It has length of 96 inches, width of 13/16 inch, and a height of ½ inch. It can be used outdoors. It also has adhesive mounting.
This PN10 raceway is made of non-metallic, and is ivory-coloured. In addition, it meets the standards for PEP and RoHS. It has length of 96 inches, width of 1 11/16 inch, and a height of 13/16 inches. It can be used outdoors. It also has adhesive mounting.
This PN10 raceway is made of non-metallic, and is ivory-coloured. In addition, it meets the standards for PEP and RoHS. It has length of 96 inches, width of 1 11/16 inch, and a height of 13/16 inches. It can be used outdoors. It also has adhesive mounting.
This 400 raceway is made of PVC, and is ivory-coloured. It includes wide adhesive tape. In addition, it meets the standards for PEP and RoHS. It has length of 60 inches, width of⅞ inch, and a height of 7/16 inches. It can be used outdoors. It also has adhesive mounting.
This 400 raceway is made of PVC, and is ivory-coloured. It includes wide adhesive tape. In addition, it meets the standards for PEP and RoHS. It has length of 60 inches, width of⅞ inch, and a height of 7/16 inches. It can be used outdoors. It also has adhesive mounting.
This T-45 end cap is made of PVC, and is off white. It includes end cap. In addition, it meets the standards for LP-CSISPEC-T45-1, NEC: Article 388, RoHS, UL compliant. It also has screw-on mounting.
This T-45 end cap is made of PVC, and is off white. It includes end cap. In addition, it meets the standards for LP-CSISPEC-T45-1, NEC: Article 388, RoHS, UL compliant. It also has screw-on mounting.
To view Availability for another location, please enter postal code below
Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order.
