General Purpose Spiral-Point Taps

This spiral point tap is made of high speed steel and has a 3.33mm diameter, 35 mm long shank. It is designed for use with aluminum, cast iron, steel, and meets the standards for ANSI. This 142 series spiral point tap has an oxide finish, and has metric measurements. It is non-coolant through, has right hand direction with a 2⅛ inch length. Plus it has two flutes and a straight shank.

This spiral point tap is made of high speed steel and has a 3.33mm diameter, 35 mm long shank. It is designed for use with aluminum, cast iron, steel, and meets the standards for ANSI. This 142 series spiral point tap has an oxide finish, and has metric measurements. It is non-coolant through, has right hand direction with a 2⅛ inch length. Plus it has two flutes and a straight shank.

This tap is made of high speed steel and has a 0.381 inch diameter, 1.6820 inch long shank. It is designed for use with steel, and meets the standards for ANSI. This 287 series tap has a bright finish, and has fractional inch measurements. It is non-coolant through, has right hand direction with a 2-15/16 inch length. Plus it has three flutes and a straight shank.

This tap is made of high speed steel and has a 0.381 inch diameter, 1.6820 inch long shank. It is designed for use with steel, and meets the standards for ANSI. This 287 series tap has a bright finish, and has fractional inch measurements. It is non-coolant through, has right hand direction with a 2-15/16 inch length. Plus it has three flutes and a straight shank.

This pipe tap is made of high speed steel and has a 0.194 inch diameter, 1.4960 inch long shank. It meets the standards for ANSI. This 105H series pipe tap has a bright (uncoated) finish, and has pipe measurements. It is non-coolant through, has right hand direction with a 2⅜ inch length. Plus it has two flutes and a straight shank.

This pipe tap is made of high speed steel and has a 0.194 inch diameter, 1.4960 inch long shank. It meets the standards for ANSI. This 105H series pipe tap has a bright (uncoated) finish, and has pipe measurements. It is non-coolant through, has right hand direction with a 2⅜ inch length. Plus it has two flutes and a straight shank.

This hand tap is made of high speed steel and has a 0.194 inch diameter, 1.5730 inch long shank. It meets the standards for ANSI. This 105 series hand tap has an oxide finish, and has pipe measurements. It is non-coolant through, has right hand direction with a 2⅜ inch length. Plus it has two flutes and a straight shank.

This hand tap is made of high speed steel and has a 0.194 inch diameter, 1.5730 inch long shank. It meets the standards for ANSI. This 105 series hand tap has an oxide finish, and has pipe measurements. It is non-coolant through, has right hand direction with a 2⅜ inch length. Plus it has two flutes and a straight shank.

This spiral point tap is made of high speed steel and has a 6 mm diameter, 40 mm long shank. It is designed for use with aluminum, cast iron, steel, and meets the standards for ANSI. This 142 series spiral point tap has an oxide finish, and has metric measurements. It is non-coolant through, has right hand direction with a 2-23/32 inch length. Plus it has two flutes and a straight shank.

This spiral point tap is made of high speed steel and has a 6 mm diameter, 40 mm long shank. It is designed for use with aluminum, cast iron, steel, and meets the standards for ANSI. This 142 series spiral point tap has an oxide finish, and has metric measurements. It is non-coolant through, has right hand direction with a 2-23/32 inch length. Plus it has two flutes and a straight shank.

This spiral point tap is made of high speed steel and has a 9.68mm diameter, 42 mm long shank. It is designed for use with aluminum, cast iron, steel, and meets ANSI standards. This 142 series spiral point tap has an oxide finish, and has metric measurements. It is non-coolant through, has right hand direction with a 2-15/16 inch length. Plus it has three flutes and a straight shank.

This spiral point tap is made of high speed steel and has a 9.68mm diameter, 42 mm long shank. It is designed for use with aluminum, cast iron, steel, and meets ANSI standards. This 142 series spiral point tap has an oxide finish, and has metric measurements. It is non-coolant through, has right hand direction with a 2-15/16 inch length. Plus it has three flutes and a straight shank.

This spiral point tap is made of high speed steel and has a 8.18mm diameter, 54 mm long shank. It is designed for use with aluminum, cast iron, steel, and meets ANSI standards. This 142 series spiral point tap has a bright finish, and has metric measurements. It is non-coolant through, has right hand direction with a 3-19/32 inch length. Plus it has three flutes and a straight shank.

This spiral point tap is made of high speed steel and has a 8.18mm diameter, 54 mm long shank. It is designed for use with aluminum, cast iron, steel, and meets ANSI standards. This 142 series spiral point tap has a bright finish, and has metric measurements. It is non-coolant through, has right hand direction with a 3-19/32 inch length. Plus it has three flutes and a straight shank.

This spiral point tap is made of high speed steel and has a 0.220 inch diameter, 1.5190 inch long shank. It meets the standards for ANSI. This 105 series spiral point tap has an oxide finish, and has pipe measurements. It is non-coolant through, has right hand direction with a 2⅜ inch length. Plus it has two flutes and a straight shank.

This spiral point tap is made of high speed steel and has a 0.220 inch diameter, 1.5190 inch long shank. It meets the standards for ANSI. This 105 series spiral point tap has an oxide finish, and has pipe measurements. It is non-coolant through, has right hand direction with a 2⅜ inch length. Plus it has two flutes and a straight shank.

This spiral point tap is made of high speed steel and has a 0.590 inch diameter, 2.5370 inch long shank. It is for use with aluminum, cast iron, steel, and meets ANSI standards. This 105 series spiral point tap has an oxide finish, and has fractional inch measurements. It is non-coolant through, has right hand direction with a 4¼ inch length. Plus it has three flutes and a straight shank.

This spiral point tap is made of high speed steel and has a 0.590 inch diameter, 2.5370 inch long shank. It is for use with aluminum, cast iron, steel, and meets ANSI standards. This 105 series spiral point tap has an oxide finish, and has fractional inch measurements. It is non-coolant through, has right hand direction with a 4¼ inch length. Plus it has three flutes and a straight shank.

This tap is made of high speed steel and has a 0.168 inch diameter, 1.3650 inch long shank. It is designed for use with steel, and meets the standards for ANSI. This 287 series tap has a black oxide finish, and has pipe measurements. It is non-coolant through, has right hand direction with a 2⅛ inch length. Plus it has two flutes and a straight shank.

This tap is made of high speed steel and has a 0.168 inch diameter, 1.3650 inch long shank. It is designed for use with steel, and meets the standards for ANSI. This 287 series tap has a black oxide finish, and has pipe measurements. It is non-coolant through, has right hand direction with a 2⅛ inch length. Plus it has two flutes and a straight shank.

This tap is made of high speed steel and has a 0.318 inch diameter, 1.5910 inch long shank. It meets the standards for ANSI. This 105H series tap has a black oxide finish, and has fractional inch measurements. It is non-coolant through, has right hand direction with a 2-23/32 inch length. Plus it has two flutes and a straight shank.

This tap is made of high speed steel and has a 0.318 inch diameter, 1.5910 inch long shank. It meets the standards for ANSI. This 105H series tap has a black oxide finish, and has fractional inch measurements. It is non-coolant through, has right hand direction with a 2-23/32 inch length. Plus it has two flutes and a straight shank.

This spiral point tap is made of high speed steel and has a 0.323 inch diameter, 1.8350 inch long shank. It is for use with aluminum, cast iron, steel, and meets ANSI standards. This 105 series spiral point tap has an oxide finish, and has fractional inch measurements. It is non-coolant through, has right hand direction with a 3-5/32 inch length. Plus it has three flutes and a straight shank.

This spiral point tap is made of high speed steel and has a 0.323 inch diameter, 1.8350 inch long shank. It is for use with aluminum, cast iron, steel, and meets ANSI standards. This 105 series spiral point tap has an oxide finish, and has fractional inch measurements. It is non-coolant through, has right hand direction with a 3-5/32 inch length. Plus it has three flutes and a straight shank.

This tap is made of high speed steel and has a 0.168 inch diameter, 1.3650 inch long shank. It is designed for use with steel. This 287 series tap has a bright finish, and has pipe measurements. It is non-coolant through, has right hand direction with a 2⅛ inch length. Plus it has two flutes and a straight shank.

This tap is made of high speed steel and has a 0.168 inch diameter, 1.3650 inch long shank. It is designed for use with steel. This 287 series tap has a bright finish, and has pipe measurements. It is non-coolant through, has right hand direction with a 2⅛ inch length. Plus it has two flutes and a straight shank.

This spiral point tap is made of high speed steel and has a 9.14mm diameter, 56 mm long shank. It is designed for use with aluminum, cast iron, steel, and meets ANSI standards. This 142 series spiral point tap has a bright finish, and has metric measurements. It is non-coolant through, has right hand direction with a 3-13/16 inch length. Plus it has three flutes and a straight shank.

This spiral point tap is made of high speed steel and has a 9.14mm diameter, 56 mm long shank. It is designed for use with aluminum, cast iron, steel, and meets ANSI standards. This 142 series spiral point tap has a bright finish, and has metric measurements. It is non-coolant through, has right hand direction with a 3-13/16 inch length. Plus it has three flutes and a straight shank.

This spiral point tap is made of high speed steel and has a 0.318 inch diameter, 1.5860 inch long shank. It is for use with aluminum, cast iron, steel, and meets ANSI standards. This 105 series spiral point tap has an oxide finish, and has fractional inch measurements. It is non-coolant through, has right hand direction with a 2-23/32 inch length. Plus it has two flutes and a straight shank.

This spiral point tap is made of high speed steel and has a 0.318 inch diameter, 1.5860 inch long shank. It is for use with aluminum, cast iron, steel, and meets ANSI standards. This 105 series spiral point tap has an oxide finish, and has fractional inch measurements. It is non-coolant through, has right hand direction with a 2-23/32 inch length. Plus it has two flutes and a straight shank.

This hand tap is made of high speed steel and has a 0.255 inch diameter, 1.5660 inch long shank. It is designed for use with aluminum, cast iron, steel, and meets the standards for ANSI. This 105 series hand tap has an oxide finish, and has fractional inch measurements. It is non-coolant through, has right hand direction with a 2½ inch length. Plus it has two flutes and a straight shank.

This hand tap is made of high speed steel and has a 0.255 inch diameter, 1.5660 inch long shank. It is designed for use with aluminum, cast iron, steel, and meets the standards for ANSI. This 105 series hand tap has an oxide finish, and has fractional inch measurements. It is non-coolant through, has right hand direction with a 2½ inch length. Plus it has two flutes and a straight shank.