Diamond Saw Blades

This Silent Runner masonry/refractory S-4 blade measures 14 x 0.125 x 1 inches. It has a long life on extremely hard, dense/non-abrasive materials, fused refractory, hot-pressed structural ceramics, carbide billets and fused refractories of alumina, calcia, silica, zirconia, and magnesia. The blade is suitable for cutting thick granite and similar stones.

This Silent Runner masonry/refractory S-4 blade measures 14 x 0.125 x 1 inches. It has a long life on extremely hard, dense/non-abrasive materials, fused refractory, hot-pressed structural ceramics, carbide billets and fused refractories of alumina, calcia, silica, zirconia, and magnesia. The blade is suitable for cutting thick granite and similar stones.

This FR3 Dri Disc segmented diamond saw blade has a 12-inch diameter and a one inch round arbour. It has a maximum speed of 6300 revolutions per minute that cuts concrete, iron, and metal up to four inches depth. The wet/dry fire rescue blade is suitable for use with power cutters.

This FR3 Dri Disc segmented diamond saw blade has a 12-inch diameter and a one inch round arbour. It has a maximum speed of 6300 revolutions per minute that cuts concrete, iron, and metal up to four inches depth. The wet/dry fire rescue blade is suitable for use with power cutters.

This banner line diamond saw blade has a 0.125 inch thickness and 14-inch diameter. It operates at a maximum power of 5 to 65 HP with a speed of 4365 RPM and has a one-inch round arbour. The wet cutting blade with segmented rim cuts green/hard concrete and asphalt of 0.125 inch width. It is for use with large flat saws and small flat saws.

This banner line diamond saw blade has a 0.125 inch thickness and 14-inch diameter. It operates at a maximum power of 5 to 65 HP with a speed of 4365 RPM and has a one-inch round arbour. The wet cutting blade with segmented rim cuts green/hard concrete and asphalt of 0.125 inch width. It is for use with large flat saws and small flat saws.

This segmented diamond saw blade has six inches diameter with 0.1 inch thickness and operates at a maximum power of 210 HP. It has a maximum speed of 10185 revolutions per minute and a triangular arbour that cuts concrete/granite of 1 3/16 inches depth. The general-purpose dry blade is suitable for use with masonry saws.

This segmented diamond saw blade has six inches diameter with 0.1 inch thickness and operates at a maximum power of 210 HP. It has a maximum speed of 10185 revolutions per minute and a triangular arbour that cuts concrete/granite of 1 3/16 inches depth. The general-purpose dry blade is suitable for use with masonry saws.

This banner line diamond saw blade has a 0.125 inch thickness and 18-inch diameter. It operates at a maximum power of 5 to 65 HP with a speed of 3395 RPM and has a one-inch round arbour. The wet cutting blade with segmented rim cuts green/hard concrete and asphalt of 0.125 inch width. It is for use with large flat saws and small flat saws.

This banner line diamond saw blade has a 0.125 inch thickness and 18-inch diameter. It operates at a maximum power of 5 to 65 HP with a speed of 3395 RPM and has a one-inch round arbour. The wet cutting blade with segmented rim cuts green/hard concrete and asphalt of 0.125 inch width. It is for use with large flat saws and small flat saws.

This diamond saw blade has a 0.125-inch plate thickness and 14-inch diameter. It has a one-inch round arbour and a segmented rim of 0.125 inch width. The wet/dry cutting blade operates at a power of 20 horsepower with a speed of 5460 RPM and has a cutting depth of five inches that cuts iron. It is for use with power cutters and small flat saws.

This diamond saw blade has a 0.125-inch plate thickness and 14-inch diameter. It has a one-inch round arbour and a segmented rim of 0.125 inch width. The wet/dry cutting blade operates at a power of 20 horsepower with a speed of 5460 RPM and has a cutting depth of five inches that cuts iron. It is for use with power cutters and small flat saws.

This Excel 1000 Series Purple segmented diamond saw blade has six inches diameter and a triangular arbour. It has a maximum speed of 10185 revolutions per minute that cuts concrete and granite up to 1 3/16 inches depth. The dry demolition blade is suitable for use with masonry saws.

This Excel 1000 Series Purple segmented diamond saw blade has six inches diameter and a triangular arbour. It has a maximum speed of 10185 revolutions per minute that cuts concrete and granite up to 1 3/16 inches depth. The dry demolition blade is suitable for use with masonry saws.

This diamond saw blade has a 0.125 inch thickness and 20 inches diameter. It operates at a maximum power of 5 to 48 HP with a speed of 3055 RPM and has a one-inch round arbour. The wet cutting blade with a segmented rim cuts asphalt, asphalt over concrete, and green concrete of 0.125 inch width. It is for use with large flat saws and small flat saws.

This diamond saw blade has a 0.125 inch thickness and 20 inches diameter. It operates at a maximum power of 5 to 48 HP with a speed of 3055 RPM and has a one-inch round arbour. The wet cutting blade with a segmented rim cuts asphalt, asphalt over concrete, and green concrete of 0.125 inch width. It is for use with large flat saws and small flat saws.

This TSD-S Dri Disc diamond saw blade has a 0.110 inch thickness and 10 inches diameter. It has a ⅝ / ⅞ inch round arbour with a speed of 6115 RPM and operates at a maximum power of 3 HP. The general-purpose wet/dry cutting blade with turbo rim cuts concrete, masonry, brick, and stone of 3¾ inches depth. It is for use with tile saws.

This TSD-S Dri Disc diamond saw blade has a 0.110 inch thickness and 10 inches diameter. It has a ⅝ / ⅞ inch round arbour with a speed of 6115 RPM and operates at a maximum power of 3 HP. The general-purpose wet/dry cutting blade with turbo rim cuts concrete, masonry, brick, and stone of 3¾ inches depth. It is for use with tile saws.

This Vari-Cut diamond saw blade has a 0.070 inch thickness and eight inches diameter. It has a ⅝-inch arbour and 0.06 inch plate thickness. The wet/dry cutting blade with continuous rim cuts porcelain tile, granite, quarry tile, and dense floor tile of 2¾ inches depth. It is for use with angle grinders, circular saws, and tile saws.

This Vari-Cut diamond saw blade has a 0.070 inch thickness and eight inches diameter. It has a ⅝-inch arbour and 0.06 inch plate thickness. The wet/dry cutting blade with continuous rim cuts porcelain tile, granite, quarry tile, and dense floor tile of 2¾ inches depth. It is for use with angle grinders, circular saws, and tile saws.