Product ITEM is unavailable. See products from the same category below.
Circular Saw Blades
Circular saw blades are used with circular saws, mitre and chop saws, table saws, and concrete and masonry saws. They have teeth that cut through material and grooves to help limit vibration and disperse heat caused by friction that can cause overheating and damage the blade. Blades are designed for use with a specific material, such as wood or metal. Generally, larger blades are used for industrial applications and smaller blades are used in circular saws and other handheld tools.
This combination circular saw blade has a 6½-inch diameter with 0.047 inch plate thickness and a speed of 8000 RPM. It has 24 teeth and a ⅝ inch round arbour. The blade with 15 Degrees hook angle and an alternate top bevel tooth has a carbide tip that cuts wood of 2 3/16 inches depth and 0.071 inch width. It is for use with circular saws.
This combination circular saw blade has a 6½-inch diameter with 0.047 inch plate thickness and a speed of 8000 RPM. It has 24 teeth and a ⅝ inch round arbour. The blade with 15 Degrees hook angle and an alternate top bevel tooth has a carbide tip that cuts wood of 2 3/16 inches depth and 0.071 inch width. It is for use with circular saws.
This combination circular saw blade is 10 inches in diameter with 0.071 inch plate thickness and a speed of 5200 RPM. It has 60 teeth and a ⅝ inch round arbour. The blade with 15 Degrees hook angle and an alternate top bevel tooth has a carbide tip that cuts wood of four inches depth. It is for use with circular, table, radial arm, and miter saws.
This combination circular saw blade is 10 inches in diameter with 0.071 inch plate thickness and a speed of 5200 RPM. It has 60 teeth and a ⅝ inch round arbour. The blade with 15 Degrees hook angle and an alternate top bevel tooth has a carbide tip that cuts wood of four inches depth. It is for use with circular, table, radial arm, and miter saws.
This combination circular saw blade has a 12-inch diameter with a 0.065 inch plate thickness and a speed of 4200 RPM. It has an 18 Degrees hook angle with 60 teeth and a one inch round arbour. The blade with alternate top bevel tooth grind and carbide tip cuts wood of 4½ inches depth. It is for use with miter saws and table saws.
This combination circular saw blade has a 12-inch diameter with a 0.065 inch plate thickness and a speed of 4200 RPM. It has an 18 Degrees hook angle with 60 teeth and a one inch round arbour. The blade with alternate top bevel tooth grind and carbide tip cuts wood of 4½ inches depth. It is for use with miter saws and table saws.
This aluminum cutting circular saw blade has a 6½-inch diameter with a 0.047 inch plate thickness and a speed of 8000 RPM. It has a carbide tip and a ⅝ inch round arbour. The blade with 36 teeth has three Degrees hook angle and flat top grind tooth. It is suitable for cutting aluminum and non-ferrous metals.
This aluminum cutting circular saw blade has a 6½-inch diameter with a 0.047 inch plate thickness and a speed of 8000 RPM. It has a carbide tip and a ⅝ inch round arbour. The blade with 36 teeth has three Degrees hook angle and flat top grind tooth. It is suitable for cutting aluminum and non-ferrous metals.
This metal-cutting circular saw blade has a 12-inch diameter with a 0.071 inch plate thickness and a speed of 1800 RPM. It has a carbide tip and a one inch round arbour. The blade with 60 teeth has 10 Degrees hook angle and MATB tooth grind. It is suitable for cutting aluminum, ferrous/non-ferrous metals, and steel.
This metal-cutting circular saw blade has a 12-inch diameter with a 0.071 inch plate thickness and a speed of 1800 RPM. It has a carbide tip and a one inch round arbour. The blade with 60 teeth has 10 Degrees hook angle and MATB tooth grind. It is suitable for cutting aluminum, ferrous/non-ferrous metals, and steel.
This metal-cutting circular saw blade has a 7¼-inch diameter with a 0.063 inch plate thickness and a speed of 5800 RPM. It has a carbide tip and a ⅝ inch round arbour. The blade with 48 teeth has 10 Degrees hook angle and MATB tooth grind. It is suitable for cutting aluminum, ferrous/non-ferrous metals, and steel.
This metal-cutting circular saw blade has a 7¼-inch diameter with a 0.063 inch plate thickness and a speed of 5800 RPM. It has a carbide tip and a ⅝ inch round arbour. The blade with 48 teeth has 10 Degrees hook angle and MATB tooth grind. It is suitable for cutting aluminum, ferrous/non-ferrous metals, and steel.
This non-ferrous metal-cutting circular saw blade has a 12-inch diameter with a 0.087 inch plate thickness and a speed of 6500 RPM. It has five Degrees hook angle with 80 teeth and a one inch round arbour. The blade with triple chip grind tooth and carbide tip cut aluminum, non-ferrous metals, and plastic of two inches depth.
This non-ferrous metal-cutting circular saw blade has a 12-inch diameter with a 0.087 inch plate thickness and a speed of 6500 RPM. It has five Degrees hook angle with 80 teeth and a one inch round arbour. The blade with triple chip grind tooth and carbide tip cut aluminum, non-ferrous metals, and plastic of two inches depth.
This crosscutting circular saw blade has a 7¼-inch diameter with 0.047 inch plate thickness and a speed of 7000 RPM. It has 24 teeth and a ⅝ inch round arbour. The blade with 18 Degrees hook angle and an alternate top bevel tooth has a carbide tip that cuts wood of 2 ⅜ inches depth and 0.071 inch width. It is for use with circular saws.
This crosscutting circular saw blade has a 7¼-inch diameter with 0.047 inch plate thickness and a speed of 7000 RPM. It has 24 teeth and a ⅝ inch round arbour. The blade with 18 Degrees hook angle and an alternate top bevel tooth has a carbide tip that cuts wood of 2 ⅜ inches depth and 0.071 inch width. It is for use with circular saws.
This non-ferrous metal circular saw blade has a 7¼-inch diameter with 0.087 inch plate thickness and a speed of 7000 RPM. It has 80 teeth and a ⅝ inch round arbour. The blade with 15 Degrees hook angle and a TCG tooth has a carbide tip that cuts aluminum, non-ferrous metals, and plastic of 1¼ inches depth.
This non-ferrous metal circular saw blade has a 7¼-inch diameter with 0.087 inch plate thickness and a speed of 7000 RPM. It has 80 teeth and a ⅝ inch round arbour. The blade with 15 Degrees hook angle and a TCG tooth has a carbide tip that cuts aluminum, non-ferrous metals, and plastic of 1¼ inches depth.
This ripping circular saw blade has a 7¼-inch diameter with 0.047 inch plate thickness and a speed of 7000 RPM. It has 24 teeth and a ⅝ inch round arbour. The blade with 15 Degrees hook angle and an alternate top bevel tooth has a carbide tip that cuts wood of 2 ⅜ inches depth and 0.071 inch width.
This ripping circular saw blade has a 7¼-inch diameter with 0.047 inch plate thickness and a speed of 7000 RPM. It has 24 teeth and a ⅝ inch round arbour. The blade with 15 Degrees hook angle and an alternate top bevel tooth has a carbide tip that cuts wood of 2 ⅜ inches depth and 0.071 inch width.
This crosscutting circular saw blade has a 7¼-inch diameter with 0.047 inch plate thickness and a speed of 7000 RPM. It has 60 teeth and a ⅝ inch round arbour. The blade with 15 Degrees hook angle and an alternate top bevel tooth has a carbide tip that cuts wood of 3 ⅛ inches depth and 0.071 inch width. It is for use with circular saws.
This crosscutting circular saw blade has a 7¼-inch diameter with 0.047 inch plate thickness and a speed of 7000 RPM. It has 60 teeth and a ⅝ inch round arbour. The blade with 15 Degrees hook angle and an alternate top bevel tooth has a carbide tip that cuts wood of 3 ⅛ inches depth and 0.071 inch width. It is for use with circular saws.
This metal-cutting circular saw blade is 14 inches in diameter with a 0.094 inch plate thickness and a speed of 1600 RPM. It has a carbide tip and a one inch round arbour. The blade with 90 teeth has 10 Degrees hook angle and MATB tooth grind. It is suitable for cutting aluminum, ferrous/non-ferrous metals, and steel.
This metal-cutting circular saw blade is 14 inches in diameter with a 0.094 inch plate thickness and a speed of 1600 RPM. It has a carbide tip and a one inch round arbour. The blade with 90 teeth has 10 Degrees hook angle and MATB tooth grind. It is suitable for cutting aluminum, ferrous/non-ferrous metals, and steel.
This metal-cutting circular saw blade is 14 inches in diameter with a 0.094 inch plate thickness and a speed of 1600 RPM. It has a carbide tip and a one inch round arbour. The blade with 70 teeth has 10 Degrees hook angle and MATB tooth grind. It is suitable for cutting aluminum, ferrous/non-ferrous metals, and steel.
This metal-cutting circular saw blade is 14 inches in diameter with a 0.094 inch plate thickness and a speed of 1600 RPM. It has a carbide tip and a one inch round arbour. The blade with 70 teeth has 10 Degrees hook angle and MATB tooth grind. It is suitable for cutting aluminum, ferrous/non-ferrous metals, and steel.
To view Availability for another location, please enter postal code below
Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order.
