Product ITEM is unavailable. See products from the same category below.
Carbon Steel Stick Welding Electrodes
Carbon steel stick electrodes provide filler metal for welding carbon steel and other compatible metals in SMAW (shielded metal arc welding) tasks. These carbon steel welding rods have a coating that releases shielding gas as it's heated, which helps keep contaminants out of the weld pool. This means the electrodes don't require an external source of shielding gas, so they can be used in windy outdoor areas.
This LA 7018 mild-steel electrode is a basic low hydrogen, all-position electrode (E7018-1) used on either DC or AC current. It can obtain code quality welds on higher strength steels with weld-metal toughness properties (charpy impacts) down to -46 Degrees C (-50 Degrees F), when coupled with a low hydrogen weld deposit. It is 12 inches in length with a 3/32-inch diameter, and meets CSA, Class E4918-1-H4 standards. Available in a 2.5-kilogram package.
This LA 7018 mild-steel electrode is a basic low hydrogen, all-position electrode (E7018-1) used on either DC or AC current. It can obtain code quality welds on higher strength steels with weld-metal toughness properties (charpy impacts) down to -46 Degrees C (-50 Degrees F), when coupled with a low hydrogen weld deposit. It is 12 inches in length with a 3/32-inch diameter, and meets CSA, Class E4918-1-H4 standards. Available in a 2.5-kilogram package.
This LA 18 low-hydrogen, basic DC+/AC electrode features a special low-moisture pick-up (LMP) coating. It is 12 inches in length with a 3/32-inch diameter, and meets CSA, Class E4918-1-H4 standards. Available in a 2.5-kilogram package.
This LA 18 low-hydrogen, basic DC+/AC electrode features a special low-moisture pick-up (LMP) coating. It is 12 inches in length with a 3/32-inch diameter, and meets CSA, Class E4918-1-H4 standards. Available in a 2.5-kilogram package.
This LA 8018-C1 electrode is made of low-alloy steel. In addition, it is for use with: steel. It has an overall length of 14 inches, an overall diameter of 1/8 inch, and weighs 11 pounds. It can be used for stick welding (SMAW), in positions including flat, horizontal, overhead, vertical-down, vertical-up and meets the standards for AWS A5½/ASME SFA 5½, Class E5518-C1, Class E8018-C1-H4, CSA W48.
This LA 8018-C1 electrode is made of low-alloy steel. In addition, it is for use with: steel. It has an overall length of 14 inches, an overall diameter of 1/8 inch, and weighs 11 pounds. It can be used for stick welding (SMAW), in positions including flat, horizontal, overhead, vertical-down, vertical-up and meets the standards for AWS A5½/ASME SFA 5½, Class E5518-C1, Class E8018-C1-H4, CSA W48.
This LA 6013, all-position, general-purpose, mild-steel electrode features a rutile AC/DC -/+ design for an extremely versatile and user-friendly performance. Its fast freeze slag characteristics make it ideally suited for welding sheet metal out of position (vertical down). It measures 12 inches in length with a 3/32-inch diameter, and meets CSA W48, Class E4313 standards. Available in a 2.5-kilogram package.
This LA 6013, all-position, general-purpose, mild-steel electrode features a rutile AC/DC -/+ design for an extremely versatile and user-friendly performance. Its fast freeze slag characteristics make it ideally suited for welding sheet metal out of position (vertical down). It measures 12 inches in length with a 3/32-inch diameter, and meets CSA W48, Class E4313 standards. Available in a 2.5-kilogram package.
This MNR Cast 99, DC + AC, specialty welding electrode is made of 99% nickel and cast iron with a 100% non-conductive flux coating for very soft machinable welds in deep recesses or close access areas. It is 12 inches long with a 3/32-inch diameter, and has a minimum tensile strength of 40,000 PSI. Available in a five-kilogram package.
This MNR Cast 99, DC + AC, specialty welding electrode is made of 99% nickel and cast iron with a 100% non-conductive flux coating for very soft machinable welds in deep recesses or close access areas. It is 12 inches long with a 3/32-inch diameter, and has a minimum tensile strength of 40,000 PSI. Available in a five-kilogram package.
This user-friendly LA EXCELARC 18 all-position, low hydrogen, basic AC/DC+ electrode is used to weld "difficult-to-weld" steels requiring Charpy impacts down to -30 Degrees C (-20 Degrees F), combined with a low hydrogen weld deposit. Suitable applications include structural steel fabrication, mining, forestry, maintenance, and repair. It is 14 inches in length with an 1/8-inch diameter, and meets CSA, Class E4918-H8 standards. Available in a five-kilogram package.
This user-friendly LA EXCELARC 18 all-position, low hydrogen, basic AC/DC+ electrode is used to weld "difficult-to-weld" steels requiring Charpy impacts down to -30 Degrees C (-20 Degrees F), combined with a low hydrogen weld deposit. Suitable applications include structural steel fabrication, mining, forestry, maintenance, and repair. It is 14 inches in length with an 1/8-inch diameter, and meets CSA, Class E4918-H8 standards. Available in a five-kilogram package.
This LA 7024, rutile AC/DC-, heavily coated, mild-steel electrode is used for flat position welding and is ideally suited for high-speed fillet weld applications. It is 14 inches in length with a 5/32-inch diameter, and meets CSA, Class E4924 standards. Available in a five-kilogram package.
This LA 7024, rutile AC/DC-, heavily coated, mild-steel electrode is used for flat position welding and is ideally suited for high-speed fillet weld applications. It is 14 inches in length with a 5/32-inch diameter, and meets CSA, Class E4924 standards. Available in a five-kilogram package.
These electrodes are used for welding mild steel. They are cellulosic AC/DC+ and are suited for maintenance work where dirty or rusty materials are found. They measure 14 x 5/32 inches, and the cellulose in the coating produces a stable, forceful penetrating arc. They come in a package weighing five kilograms.
These electrodes are used for welding mild steel. They are cellulosic AC/DC+ and are suited for maintenance work where dirty or rusty materials are found. They measure 14 x 5/32 inches, and the cellulose in the coating produces a stable, forceful penetrating arc. They come in a package weighing five kilograms.
This LA 18 Plus electrode is made of low-hydrogen steel. In addition, it is for use with: steel. It has an overall length of 18 inches, an overall diameter of 3/16 inch, and weighs 11 pounds. It can be used for stick welding (SMAW), in positions including flat, horizontal, overhead, vertical-down, vertical-up and meets the standards for AWS A5.1/ASME SFA 5.1, CSA W48, E4918-1-H4, E7018-1-H4.
This LA 18 Plus electrode is made of low-hydrogen steel. In addition, it is for use with: steel. It has an overall length of 18 inches, an overall diameter of 3/16 inch, and weighs 11 pounds. It can be used for stick welding (SMAW), in positions including flat, horizontal, overhead, vertical-down, vertical-up and meets the standards for AWS A5.1/ASME SFA 5.1, CSA W48, E4918-1-H4, E7018-1-H4.
This LA 18 PLUS complete low-hydrogen, all-position, AC/DC electrode is designed to meet severe impact requirements down to -45 Degrees C (-50 Degrees F) and provides superior low temperature toughness properties with consistent weld metal soundness at low temperatures. It is 18 inches in length with a 3/16-inch diameter, and meets CSA W48, Class E4918-1-H4 standards. Available in a five-kilogram package.
This LA 18 PLUS complete low-hydrogen, all-position, AC/DC electrode is designed to meet severe impact requirements down to -45 Degrees C (-50 Degrees F) and provides superior low temperature toughness properties with consistent weld metal soundness at low temperatures. It is 18 inches in length with a 3/16-inch diameter, and meets CSA W48, Class E4918-1-H4 standards. Available in a five-kilogram package.
This LA 18 low-hydrogen, basic DC+/AC electrode features a special low-moisture pick-up (LMP) coating. It is 18 inches in length with a 3/16-inch diameter, and meets CSA, Class E4918-1-H4 standards. Available in a five-kilogram package.
This LA 18 low-hydrogen, basic DC+/AC electrode features a special low-moisture pick-up (LMP) coating. It is 18 inches in length with a 3/16-inch diameter, and meets CSA, Class E4918-1-H4 standards. Available in a five-kilogram package.
This LA 8018-C2 electrode is made of low-alloy steel. In addition, it is for use with: steel. It has an overall length of 14 inches, an overall diameter of 1/8 inch, and weighs 11 pounds. It can be used for stick welding (SMAW), in positions including flat, horizontal, overhead, vertical-down, vertical-up and meets the standards for AWS A5½/ASME SFA 5½, Class E8018-C2-H4.
This LA 8018-C2 electrode is made of low-alloy steel. In addition, it is for use with: steel. It has an overall length of 14 inches, an overall diameter of 1/8 inch, and weighs 11 pounds. It can be used for stick welding (SMAW), in positions including flat, horizontal, overhead, vertical-down, vertical-up and meets the standards for AWS A5½/ASME SFA 5½, Class E8018-C2-H4.
Use this MNR Universal mild-steel electrode for all-round repairs and general fabrication. It has a fast-freezing slag system for maximum positional operability and is ideal for high-speed welding on thin-gauge, clean, or new steel components. It is DC +/- AC, 12 inches long with a 3/32-inch diameter, and has a minimum tensile strength of 75,000 PSI. Available in a 0.45-kilogram package.
Use this MNR Universal mild-steel electrode for all-round repairs and general fabrication. It has a fast-freezing slag system for maximum positional operability and is ideal for high-speed welding on thin-gauge, clean, or new steel components. It is DC +/- AC, 12 inches long with a 3/32-inch diameter, and has a minimum tensile strength of 75,000 PSI. Available in a 0.45-kilogram package.
Use this MNR Universal mild-steel electrode for all-round repairs and general fabrication. It has a fast-freezing slag system for maximum positional operability and is ideal for high-speed welding on thin-gauge, clean, or new steel components. It is DC +/- AC, 14 inches long with an 1/8-inch diameter, and has a minimum tensile strength of 75,000 PSI. Available in a 0.45-kilogram package.
Use this MNR Universal mild-steel electrode for all-round repairs and general fabrication. It has a fast-freezing slag system for maximum positional operability and is ideal for high-speed welding on thin-gauge, clean, or new steel components. It is DC +/- AC, 14 inches long with an 1/8-inch diameter, and has a minimum tensile strength of 75,000 PSI. Available in a 0.45-kilogram package.
This LA 6010, all-position, mild-steel electrode is used for producing very high quality welds and features a cellulosic DC+ covering to produce a forceful, deep-penetrating arc and a thin, friable, easily removed slag. It measures 14 inches in length with an 1/8-inch diameter, and meets CSA W48, Class E4310 standards. Available in a five-kilogram package.
This LA 6010, all-position, mild-steel electrode is used for producing very high quality welds and features a cellulosic DC+ covering to produce a forceful, deep-penetrating arc and a thin, friable, easily removed slag. It measures 14 inches in length with an 1/8-inch diameter, and meets CSA W48, Class E4310 standards. Available in a five-kilogram package.
These electrodes are used for welding mild steel. They are cellulosic DC+ and yields welds that possess mechanical properties. They measure 12 x 3/32 inches, and the cellulose in the coating produces a deep, forceful penetrating arc. They come in a package weighing 2.5 kilograms.
These electrodes are used for welding mild steel. They are cellulosic DC+ and yields welds that possess mechanical properties. They measure 12 x 3/32 inches, and the cellulose in the coating produces a deep, forceful penetrating arc. They come in a package weighing 2.5 kilograms.
To view Availability for another location, please enter postal code below
Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order.
