Bulk Air Hoses

This air hose has a length of 50 feet, a maximum operating pressure of 300 psi @ 70 Degrees F and is yellow, has an operating temperature of -40 Degrees to 150 Degrees F and is made of rubber. In addition, it has ⅜ inch inside diameter.

This air hose has a length of 50 feet, a maximum operating pressure of 300 psi @ 70 Degrees F and is yellow, has an operating temperature of -40 Degrees to 150 Degrees F and is made of rubber. In addition, it has ⅜ inch inside diameter.

The blue E-Z Form(TM) hose is an excellent alternative to moulded hose. It is reinforced with three-ply textile plies and a wire helix, and made from EPDM. The hose complies with standards SAE J20R2-D1. The hose can withstand temperatures between -40 Degrees C - 125 Degrees C. Its working pressure is 75 PSI. It is 1 3/4 inches. This hose is good for air-, coolant-, mild chemicals-, water-, coolant systems-, drain lines-, and vacuum-service. The blue E-Z Form(TM) hose has a strength and high temp

The blue E-Z Form(TM) hose is an excellent alternative to moulded hose. It is reinforced with three-ply textile plies and a wire helix, and made from EPDM. The hose complies with standards SAE J20R2-D1. The hose can withstand temperatures between -40 Degrees C - 125 Degrees C. Its working pressure is 75 PSI. It is 1 3/4 inches. This hose is good for air-, coolant-, mild chemicals-, water-, coolant systems-, drain lines-, and vacuum-service. The blue E-Z Form(TM) hose has a strength and high temp

Use E-Z Form(TM) hose where water hose is desired for a flexible, highly bendable solution. The hose is red and 1 3/8 inches. It can withstand temperatures between -29 Degrees C - 93 Degrees C. Its composition of black nitrile with multi-ply textile, and wire helix gives the hose its strength and high temperature rating.

Use E-Z Form(TM) hose where water hose is desired for a flexible, highly bendable solution. The hose is red and 1 3/8 inches. It can withstand temperatures between -29 Degrees C - 93 Degrees C. Its composition of black nitrile with multi-ply textile, and wire helix gives the hose its strength and high temperature rating.

Use the jiffy push-on hose for multipurpose uses. It can be used as an air hose or to convey water, mild chemicals, and various petroleum products. It is oil-resistant. It measures 0.500 x 0.750 inches and is sold per foot. The hose is red. No clamps or special tools are needed for the jiffy hose. It is MSHA-approved and silicone-free.

Use the jiffy push-on hose for multipurpose uses. It can be used as an air hose or to convey water, mild chemicals, and various petroleum products. It is oil-resistant. It measures 0.500 x 0.750 inches and is sold per foot. The hose is red. No clamps or special tools are needed for the jiffy hose. It is MSHA-approved and silicone-free.

This push-on hose meets the standards for RMA Class B, has a length of 50 feet, a maximum operating pressure of 300 psi @ 70 Degrees F and is red, has an operating temperature of -40 Degrees to 180 Degrees F and is made of nitrile. In addition, it has ¾ inch inside diameter. This push-on hose is for use on air, automatic transmission fluid, diesel fuel, ethylene glycol, fuel oil, gasoline, hydraulic fluid, kerosene, lubricat, and more.

This push-on hose meets the standards for RMA Class B, has a length of 50 feet, a maximum operating pressure of 300 psi @ 70 Degrees F and is red, has an operating temperature of -40 Degrees to 180 Degrees F and is made of nitrile. In addition, it has ¾ inch inside diameter. This push-on hose is for use on air, automatic transmission fluid, diesel fuel, ethylene glycol, fuel oil, gasoline, hydraulic fluid, kerosene, lubricat, and more.

This easy couple hose has a length of 50 feet, a maximum operating pressure of 300 psi @ 70 Degrees F and is black, has an operating temperature of -40 Degrees to 212 Degrees F and is made of neoprene. In addition, it has 1⅜ inch outside diameter, ¾ inch inside diameter. This easy couple hose is for use on air, automatic transmission fluid, diesel fuel, ethylene glycol, fuel oil, gasoline, hydraulic fluid, and more.

This easy couple hose has a length of 50 feet, a maximum operating pressure of 300 psi @ 70 Degrees F and is black, has an operating temperature of -40 Degrees to 212 Degrees F and is made of neoprene. In addition, it has 1⅜ inch outside diameter, ¾ inch inside diameter. This easy couple hose is for use on air, automatic transmission fluid, diesel fuel, ethylene glycol, fuel oil, gasoline, hydraulic fluid, and more.

This air hose has a length of 500 feet, a maximum operating pressure of 200 psi @ 70 Degrees F, is red, has an operating temperature of -20.2 Degrees to 210.2 Degrees F and is made of nitrile synthetic rubber. In addition, it has 11/16 inch outside diameter and ⅜ inch inside diameter.

This air hose has a length of 500 feet, a maximum operating pressure of 200 psi @ 70 Degrees F, is red, has an operating temperature of -20.2 Degrees to 210.2 Degrees F and is made of nitrile synthetic rubber. In addition, it has 11/16 inch outside diameter and ⅜ inch inside diameter.

This hose bends to fit an assortment of applications where moulded hose might otherwise be used. At 3 3/8 inches, this red E-Z Form(TM) hose can withstand temperature extremes between -29 Degrees C - 93 Degrees C. It is made of black nitrile with multi-ply textile and wire helix. This gives the hose its strength and high temperature rating.

This hose bends to fit an assortment of applications where moulded hose might otherwise be used. At 3 3/8 inches, this red E-Z Form(TM) hose can withstand temperature extremes between -29 Degrees C - 93 Degrees C. It is made of black nitrile with multi-ply textile and wire helix. This gives the hose its strength and high temperature rating.

E-Z Form(TM) hose to installations where tight bends exceed the bend radius of other hoses: where the application might otherwise indicate specifying a formed hose.

E-Z Form(TM) hose to installations where tight bends exceed the bend radius of other hoses: where the application might otherwise indicate specifying a formed hose.