Epoxy Coatings

Dries fast, 30 minutes to touch and tack free. Excellent color retention. Protects new and previously painted metal. Can be used as a primer under Beyond finishes. Results in a smooth, washable, professional gloss finish. Meets LEED product requirements for indoor air quality.

Dries fast, 30 minutes to touch and tack free. Excellent color retention. Protects new and previously painted metal. Can be used as a primer under Beyond finishes. Results in a smooth, washable, professional gloss finish. Meets LEED product requirements for indoor air quality.

This is an interior and exterior acrylic urethane accent base paint for use on metal surfaces. Each one-gallon can cover 180 to 545 square feet. This paint is water-based, semi-gloss, and contains 0.0 grams per litre of volatile organic compounds. The dry-time is 30 minutes, and the dry-time on a re-coat is two to four hours. This paint can be applied in temperatures ranging from 50 to 100 degrees Fahrenheit.

This is an interior and exterior acrylic urethane accent base paint for use on metal surfaces. Each one-gallon can cover 180 to 545 square feet. This paint is water-based, semi-gloss, and contains 0.0 grams per litre of volatile organic compounds. The dry-time is 30 minutes, and the dry-time on a re-coat is two to four hours. This paint can be applied in temperatures ranging from 50 to 100 degrees Fahrenheit.

This is a semi-gloss, white, water-based acrylic primer for interior use. It can be applied using a brush, a roll, or as a spray, and will cover 300 to 400 square feet per gallon. The optimal temperature range for application is 50 to 90 degrees Fahrenheit. This primer takes 30 minutes to dry, and if a recoat is needed, it will take two hours to dry. The cure time for this primer is seven to ten days. This listing is for a 931 millilitre can.

This is a semi-gloss, white, water-based acrylic primer for interior use. It can be applied using a brush, a roll, or as a spray, and will cover 300 to 400 square feet per gallon. The optimal temperature range for application is 50 to 90 degrees Fahrenheit. This primer takes 30 minutes to dry, and if a recoat is needed, it will take two hours to dry. The cure time for this primer is seven to ten days. This listing is for a 931 millilitre can.

High performance epoxy 2 component system, 9100 series. Designed to provide high-performance service in moderate to severe environments. Primarily intended for use directly on sound rusted steel with minimum surface preparation.

High performance epoxy 2 component system, 9100 series. Designed to provide high-performance service in moderate to severe environments. Primarily intended for use directly on sound rusted steel with minimum surface preparation.

This deep base colour, urethane-modified acrylic enamel paint, is for interior and exterior use on galvanized steel, aluminum and other metals. One gallon will cover 180 to 545 square feet. This water-based paint has a high-gloss finish. Apply within a temperature range of 50 to 100 degrees Fahrenheit, using a spray, roll, or brush. It will dry in one hour, with a recoat dry time of one hour and a seven-day cure time.

This deep base colour, urethane-modified acrylic enamel paint, is for interior and exterior use on galvanized steel, aluminum and other metals. One gallon will cover 180 to 545 square feet. This water-based paint has a high-gloss finish. Apply within a temperature range of 50 to 100 degrees Fahrenheit, using a spray, roll, or brush. It will dry in one hour, with a recoat dry time of one hour and a seven-day cure time.

This 473 millilitre can of solvent-based, shellac primer is white in colour, with a flat finish. This shellac is for mild to moderate exposure conditions, and for best results, should be applied in temperatures ranging from zero to 90 degrees Fahrenheit. It dries in 20 minutes, with a recoat dry time of 45 minutes, and it cures in one to three days. Apply this primer using a brush, roll, or spray. One gallon will provide 500 square feet of coverage.

This 473 millilitre can of solvent-based, shellac primer is white in colour, with a flat finish. This shellac is for mild to moderate exposure conditions, and for best results, should be applied in temperatures ranging from zero to 90 degrees Fahrenheit. It dries in 20 minutes, with a recoat dry time of 45 minutes, and it cures in one to three days. Apply this primer using a brush, roll, or spray. One gallon will provide 500 square feet of coverage.

This is a 797-millilitre can of white, gloss, epoxy, whiteboard paint. The VOC content is 343 grams per litre. This paint has a solvent base, and a cure time is 72 hours. The dry time is one hour, and the recoat dry time is 20 to 30 minutes. This is interior paint and should be applied with a roller in 50 to 90 degrees Fahrenheit. One can has 45 to 55 square feet of coverage.

This is a 797-millilitre can of white, gloss, epoxy, whiteboard paint. The VOC content is 343 grams per litre. This paint has a solvent base, and a cure time is 72 hours. The dry time is one hour, and the recoat dry time is 20 to 30 minutes. This is interior paint and should be applied with a roller in 50 to 90 degrees Fahrenheit. One can has 45 to 55 square feet of coverage.

This is a flat, white, shellac primer paint for use in mild to moderate exposure conditions. This is a 946-millilitre can of primer and a solvent base. With a dry time of 20 minutes and a recoat time of 45 minutes, this paint will cover 500 square feet per gallon. Apply this paint in temperatures from zero to 90 degrees Fahrenheit, using a brush, roll, or spray. It cures completely in one to three days.

This is a flat, white, shellac primer paint for use in mild to moderate exposure conditions. This is a 946-millilitre can of primer and a solvent base. With a dry time of 20 minutes and a recoat time of 45 minutes, this paint will cover 500 square feet per gallon. Apply this paint in temperatures from zero to 90 degrees Fahrenheit, using a brush, roll, or spray. It cures completely in one to three days.

This is a flat-finish, red-oxide-coloured, solvent-based primer for use on metal surfaces. It has an alkyd resin. This primer will dry in eight to 12 hours, with a recoat dry time of 24 hours and a cure time of 24 hours. It can be applied using a brush, a roll, or as a spray. This primer should be used in mild to moderate exposure conditions and applied in temperatures ranging from 32 to 90 degrees Fahrenheit. Each can is 3.78 litres and provides 66 to 110 square feet of coverage.

This is a flat-finish, red-oxide-coloured, solvent-based primer for use on metal surfaces. It has an alkyd resin. This primer will dry in eight to 12 hours, with a recoat dry time of 24 hours and a cure time of 24 hours. It can be applied using a brush, a roll, or as a spray. This primer should be used in mild to moderate exposure conditions and applied in temperatures ranging from 32 to 90 degrees Fahrenheit. Each can is 3.78 litres and provides 66 to 110 square feet of coverage.

Brush, roll, or spray this glossy black solvent-based paint on metal surfaces. This paint has an alkyd resin. It can be applied in temperatures between 32 and 90 degrees Fahrenheit. Each 946-millilitre can will cover 66 to 110 square feet, with a drying time of eight to 12 hours, and a recoat drying time of 24 hours. It will dry completely in another 24 hours. This paint is made for mild to moderate exposure conditions.

Brush, roll, or spray this glossy black solvent-based paint on metal surfaces. This paint has an alkyd resin. It can be applied in temperatures between 32 and 90 degrees Fahrenheit. Each 946-millilitre can will cover 66 to 110 square feet, with a drying time of eight to 12 hours, and a recoat drying time of 24 hours. It will dry completely in another 24 hours. This paint is made for mild to moderate exposure conditions.

This is leather-brown rust paint for metal surfaces. It can be applied with a brush, roll, or spray. This paint has a gloss finish and a solvent base. Use in areas with mild to moderate exposure conditions, and apply within a temperature range of 32 to 90 degrees Fahrenheit. One 946-millilitre can will cover 66 to 110 square feet. It takes eight to 12 hours to dry, and if a recoat is needed, it will take 24 hours to dry. This paint dries completely in 24 hours.

This is leather-brown rust paint for metal surfaces. It can be applied with a brush, roll, or spray. This paint has a gloss finish and a solvent base. Use in areas with mild to moderate exposure conditions, and apply within a temperature range of 32 to 90 degrees Fahrenheit. One 946-millilitre can will cover 66 to 110 square feet. It takes eight to 12 hours to dry, and if a recoat is needed, it will take 24 hours to dry. This paint dries completely in 24 hours.

High performance water-based, zero VOC, zero HAP's, no solvent odor industrial/commercial coating for occupied spaces. Fast dry to the touch and recoat. Green Seal certified and contributed to all LEED credits for indoor air quality. Easy to mix and use kit for walls, equipment and more.

High performance water-based, zero VOC, zero HAP's, no solvent odor industrial/commercial coating for occupied spaces. Fast dry to the touch and recoat. Green Seal certified and contributed to all LEED credits for indoor air quality. Easy to mix and use kit for walls, equipment and more.

High performance epoxy 2 component system, 9100 series. Designed to provide high-performance service in moderate to severe environments. Primarily intended for use directly on sound rusted steel with minimum surface preparation.

High performance epoxy 2 component system, 9100 series. Designed to provide high-performance service in moderate to severe environments. Primarily intended for use directly on sound rusted steel with minimum surface preparation.