Ces trousses contiennent chacune 3 tarauds à goujure droite. Les tarauds ont tous la même taille de filetage, la même longueur de filetage et la même longueur totale, mais chacun a un style de chanfrein différent. Le premier a un chanfrein conique, le deuxième un chanfrein de finition et le troisième un chanfrein d’obturation. Les tarauds à goujures droites sont utilisés avec une clé à taraud pour créer/réparer des filetages internes dans des trous borgnes ou traversants. Lors de la création d’un filetage dans un trou avec un taraud, les copeaux se déplacent dans les goujures sans être évacués.
Cet ensemble de tarauds est en acier rapide et a une tige de 9/64 po de diamètre. Il comprend un taraud finisseur, un taraud bouchon, un taraud conique et répond à la norme USCTI Tableau 302. Cet ensemble de tarauds a un fini TIN. Il a une direction à droite et une longueur de 1 7/8 po.
Cet ensemble de tarauds est en acier rapide et a une tige de 9/64 po de diamètre. Il comprend un taraud finisseur, un taraud bouchon, un taraud conique et répond à la norme USCTI Tableau 302. Cet ensemble de tarauds a un fini TIN. Il a une direction à droite et une longueur de 1 7/8 po.
Cet ensemble de tarauds est en acier rapide et a une tige de 3/8 po de diamètre. Il comprend un taraud finisseur, un taraud bouchon, un taraud conique et répond à la norme USCTI Tableau 302. Cet ensemble de tarauds a un fini TIN. Il a une direction à droite et une longueur de 2 15/16 po.
Cet ensemble de tarauds est en acier rapide et a une tige de 3/8 po de diamètre. Il comprend un taraud finisseur, un taraud bouchon, un taraud conique et répond à la norme USCTI Tableau 302. Cet ensemble de tarauds a un fini TIN. Il a une direction à droite et une longueur de 2 15/16 po.
Cet ensemble de tarauds est en acier rapide et a une tige de 37/64 po de diamètre. Il comprend un taraud finisseur, un taraud bouchon, un taraud conique et répond à la norme USCTI Tableau 302. Cet ensemble de tarauds a un fini TIN. Il a une direction à droite et une longueur de 4 1/4 po.
Cet ensemble de tarauds est en acier rapide et a une tige de 37/64 po de diamètre. Il comprend un taraud finisseur, un taraud bouchon, un taraud conique et répond à la norme USCTI Tableau 302. Cet ensemble de tarauds a un fini TIN. Il a une direction à droite et une longueur de 4 1/4 po.
This tap set is made of high speed steel and has a 9/64 inch diameter shank. It includes one bottoming tap, one plug tap, one taper tap, and meets the standards for USCTI Table 302. This tap set has a bright (uncoated) finish. It has right hand direction with a 1 13/16 inch length.
This tap set is made of high speed steel and has a 9/64 inch diameter shank. It includes one bottoming tap, one plug tap, one taper tap, and meets the standards for USCTI Table 302. This tap set has a bright (uncoated) finish. It has right hand direction with a 1 13/16 inch length.
This tap set is made of high speed steel and has a 9/64 inch diameter shank. It includes one bottoming tap, one plug tap, one taper tap, and meets the standards for USCTI Table 302. This tap set has a TiN finish. It has right hand direction with a 1⅞ inch length.
This tap set is made of high speed steel and has a 9/64 inch diameter shank. It includes one bottoming tap, one plug tap, one taper tap, and meets the standards for USCTI Table 302. This tap set has a TiN finish. It has right hand direction with a 1⅞ inch length.
This tap set is made of high speed steel and has a 9/64 inch diameter shank. It includes one bottoming tap, one plug tap, one taper tap, and meets the standards for USCTI Table 302. This tap set has a bright (uncoated) finish. It has right hand direction with a 1 13/16 inch length.
This tap set is made of high speed steel and has a 9/64 inch diameter shank. It includes one bottoming tap, one plug tap, one taper tap, and meets the standards for USCTI Table 302. This tap set has a bright (uncoated) finish. It has right hand direction with a 1 13/16 inch length.
This three-piece tap kit is made of high speed steel and has a 3.58 mm diameter shank. It includes one bottoming tap, one plug tap, one taper tap, and is designed for use with aluminum, brass, bronze, cast iron, copper, steel, and meets the standards for USCTI. This HTGP-3PC-TN series three-piece tap kit has a TiN finish. It has right hand direction with a 49.28 mm length.
This three-piece tap kit is made of high speed steel and has a 3.58 mm diameter shank. It includes one bottoming tap, one plug tap, one taper tap, and is designed for use with aluminum, brass, bronze, cast iron, copper, steel, and meets the standards for USCTI. This HTGP-3PC-TN series three-piece tap kit has a TiN finish. It has right hand direction with a 49.28 mm length.
This three-piece tap kit is made of high speed steel and has a 10.90 mm diameter shank. It includes one bottoming tap, one plug tap, one taper tap, and is designed for use with aluminum, brass, bronze, cast iron, copper, steel, and meets the standards for USCTI. This HTGP-3PC-TN series three-piece tap kit has a TiN finish. It has right hand direction with a 91.19 mm length.
This three-piece tap kit is made of high speed steel and has a 10.90 mm diameter shank. It includes one bottoming tap, one plug tap, one taper tap, and is designed for use with aluminum, brass, bronze, cast iron, copper, steel, and meets the standards for USCTI. This HTGP-3PC-TN series three-piece tap kit has a TiN finish. It has right hand direction with a 91.19 mm length.
This tap set is made of high speed steel and has a 7/32 inch diameter shank. It includes one bottoming tap, one plug tap, one taper tap, and meets the standards for USCTI Table 302. This tap set has a bright (uncoated) finish. It has right hand direction with a 2⅜ inch length.
This tap set is made of high speed steel and has a 7/32 inch diameter shank. It includes one bottoming tap, one plug tap, one taper tap, and meets the standards for USCTI Table 302. This tap set has a bright (uncoated) finish. It has right hand direction with a 2⅜ inch length.
This tap set is made of high speed steel and has a ¼ inch diameter shank. It includes one bottoming tap, one plug tap, one taper tap, and meets the standards for USCTI Table 302. This tap set has a bright (uncoated) finish. It has right hand direction with a 2½ inch length.
This tap set is made of high speed steel and has a ¼ inch diameter shank. It includes one bottoming tap, one plug tap, one taper tap, and meets the standards for USCTI Table 302. This tap set has a bright (uncoated) finish. It has right hand direction with a 2½ inch length.
This tap set is made of high speed steel and has a 17/32 inch diameter shank. It includes one bottoming tap, one plug tap, one taper tap, and meets the standards for USCTI Table 302. This tap set has a bright (uncoated) finish. It has right hand direction with a 4 1/32 inch length.
This tap set is made of high speed steel and has a 17/32 inch diameter shank. It includes one bottoming tap, one plug tap, one taper tap, and meets the standards for USCTI Table 302. This tap set has a bright (uncoated) finish. It has right hand direction with a 4 1/32 inch length.
This three-piece tap kit is made of high speed steel and has a 9.68 mm diameter shank. It includes one bottoming tap, one plug tap, one taper tap, and is designed for use with aluminum, brass, bronze, cast iron, copper, steel, and meets the standards for USCTI. This HTGP-3PC-TN series three-piece tap kit has a TiN finish. It has right hand direction with a 74.68 mm length.
This three-piece tap kit is made of high speed steel and has a 9.68 mm diameter shank. It includes one bottoming tap, one plug tap, one taper tap, and is designed for use with aluminum, brass, bronze, cast iron, copper, steel, and meets the standards for USCTI. This HTGP-3PC-TN series three-piece tap kit has a TiN finish. It has right hand direction with a 74.68 mm length.
This three-piece tap kit is made of high speed steel and has a 12.19 mm diameter shank. It includes one bottoming tap, one plug tap, one taper tap, and is designed for use with aluminum, brass, bronze, cast iron, copper, steel, and meets the standards for USCTI. This HTGP-3PC-TN series three-piece tap kit has a TiN finish. It has right hand direction with a 96.77 mm length.
This three-piece tap kit is made of high speed steel and has a 12.19 mm diameter shank. It includes one bottoming tap, one plug tap, one taper tap, and is designed for use with aluminum, brass, bronze, cast iron, copper, steel, and meets the standards for USCTI. This HTGP-3PC-TN series three-piece tap kit has a TiN finish. It has right hand direction with a 96.77 mm length.
This tap set is made of high speed steel and has a 9/64 inch diameter shank. It includes one bottoming tap, one plug tap, one taper tap, and meets the standards for USCTI Table 302. This tap set has a bright (uncoated) finish. It has right hand direction with a 1¾ inch length.
This tap set is made of high speed steel and has a 9/64 inch diameter shank. It includes one bottoming tap, one plug tap, one taper tap, and meets the standards for USCTI Table 302. This tap set has a bright (uncoated) finish. It has right hand direction with a 1¾ inch length.
This tap set is made of high speed steel and has a ⅜ inch diameter shank. It includes one bottoming tap, one plug tap, one taper tap, and meets the standards for USCTI Table 302. This tap set has a bright (uncoated) finish. It has right hand direction with a 2 15/16 inch length.
This tap set is made of high speed steel and has a ⅜ inch diameter shank. It includes one bottoming tap, one plug tap, one taper tap, and meets the standards for USCTI Table 302. This tap set has a bright (uncoated) finish. It has right hand direction with a 2 15/16 inch length.
To view Availability for another location, please enter postal code below
Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order.
