!
Browser upgrade recommended: Improve your Grainger.ca experience by upgrading your browser to Edge or Chrome. Learn more about our supported browsers.
Back to Top

Filter Results By

Magasiner Par
Marque
Prix
Taille de filetage
Type de filet
Matériau du taraud
Fini du taraud
Longueur de filetage
Longueur hors tout
Taille de foret pour filetage à 75 %
Chanfrein du taraud
Tolérance sur diamètre sur flancs de taraud
Classe d'ajustement
Direction de filetage
Nb de goujures
Application - matière principale

Tarauds à entrée hélicoïdale à usage général

Les tarauds à pointes hélicoïdales à usage général sont destinés au filetage d'une large gamme de matériaux. Les tarauds ont des goujures droites avec une pointe hélicoïdale qui pousse les copeaux devant le taraud lorsqu'il se déplace dans un trou et sort de l'autre côté, forçant ainsi les copeaux en dehors du trou. Ils créent des filetages internes dans les trous traversant et s'installent dans un porte-outils sur une machine telle qu'un tour ou une machine à commande numérique.

https://catalogue.grainger.ca/?hybris=true

800 Results Found

In stock at branch(0)
Results per page :  16 | 32 | 48
  • WESTWARD
  • TARAUD À ENTRÉE HÉLICOÏDALE, FILETAGE 1/4 PO-20, FILETAGE 1 PO LONG, 2 1/2 PO LONG, FICHE, 2 CANNELURES
  • Item # WSW5TWD1
  • Mfr. Model # 5TWD1
  • EHC: EHC :
  • Ce taraud à entrée hélicoïdale en acier rapide M2 a une tige de 0,255 po de diamètre. Il sert à tous les matériaux et répond aux normes ANSI. Ce taraud de la série 311-90685 est non enduit et a des mesures fractionnaires en po. Il est sans canal de refroidissement, a une direction à droite et une longueur de 2 1/2 po. De plus, il a 2 cannelures et une tige droite.

    View more View less

    SDS Document Not Found

    For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

    CATALOGUE PAGE # N/A
  • OSG
  • TARAUD À ENTRÉE HÉLICOÏDALE, FILETAGE 1/4 PO-20, FILETAGE 5/8 PO LONG, 2 1/2 PO LONG, FICHE, DROITIER
  • Item # OSG2885600
  • Mfr. Model # 2885600
  • EHC: EHC :
  • Ce taraud est en acier rapide et a une tige de 0,255 po de diamètre/1,4930 po de long. Il est destiné à être utilisé avec de l'acier et répond aux normes ANSI. Il a un fini brillant/non revêtu et des mesures fractionnaires en po. Il est sans canal de refroidissement, a une direction à droite et une longueur de 2 1/2 po. De plus, il a 2 cannelures et une tige droite.

    View more View less

    SDS Document Not Found

    For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

    CATALOGUE PAGE # N/A
  • WESTWARD
  • TARAUD À ENTRÉE HÉLICOÏDALE, FILETAGE M5X0,80, FILETAGE 7/8 PO LONG, 2 3/8 PO LONG, FICHE
  • Item # WSW5TWL1
  • Mfr. Model # 5TWL1
  • EHC: EHC :
  • Ce taraud à entrée hélicoïdale en acier rapide M2 a une tige de 4,93 mm de diamètre. Il sert à tous les matériaux et répond aux normes ANSI. Ce taraud de la série 311-81205 n'a pas d’enduit et est métrique. Il est sans canal de refroidissement, a une direction à droite et une longueur de 60,32 mm. De plus, il a 2 cannelures et une tige droite.

    View more View less

    SDS Document Not Found

    For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

    CATALOGUE PAGE # N/A
  • WESTWARD
  • TARAUD À ENTRÉE HÉLICOÏDALE, FILETAGE NO 6-32, FILETAGE 11/16 PO LONG, 2 PO LONG, FICHE, DROITIER
  • Item # WSW5TWC7
  • Mfr. Model # 5TWC7
  • EHC: EHC :
  • Ce taraud à entrée hélicoïdale en acier rapide M2 a une tige de 0,141 po de diamètre. Il sert à tous les matériaux et répond aux normes ANSI. Ce taraud de la série 311-90365 est sans revêtement et a des mesures de tuyaux. Il est sans canal de refroidissement, a une direction à droite et une longueur de 2 po. De plus, il a 2 cannelures et une tige droite.

    View more View less

    SDS Document Not Found

    For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

    CATALOGUE PAGE # N/A
  • GREENFIELD THREADING
  • TARAUD À ENTRÉE HÉLICOÏDALE, FILETAGE M8-1,25, FILETAGE 28,57 MM LONG, FICHE, 2 CANNELURES, ACIER RAPIDE
  • Item # GNF360926
  • Mfr. Model # 360926
  • EHC: EHC :
  • Ce taraud en acier rapide a une tige de 8 mm de diamètre. Il est destiné à être utilisé sur de l’acier inoxydable/de l’acier et répond aux normes USCTI. Il a un fini TIN et est métrique. Il a une direction à droite et une longueur de 69,06 mm. De plus, il a 2 cannelures et une tige droite.

    View more View less

    SDS Document Not Found

    For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

    CATALOGUE PAGE # N/A
  • WESTWARD
  • TARAUD À ENTRÉE HÉLICOÏDALE, FILETAGE 5/16 PO-18, FILETAGE 1⅛ PO LONG, 2 23/32 PO LONG, FICHE, M2
  • Item # WSW5TWD3
  • Mfr. Model # 5TWD3
  • EHC: EHC :
  • Ce taraud à entrée hélicoïdale en acier rapide M2 a une tige de 0,318 po de diamètre. Il sert à tous les matériaux et répond aux normes ANSI. Ce taraud de la série 311 90885 est non enduit et a des mesures fractionnaires en po. Il est sans canal de refroidissement, a une direction à droite et une longueur de 2 23/32 po. De plus, il a 2 cannelures et une tige droite.

    View more View less

    SDS Document Not Found

    For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

    CATALOGUE PAGE # N/A
  • CLEVELAND
  • TARAUD À ENTRÉE HÉLICOÏDALE, FILETAGE 1/4 PO-20, FILETAGE 5/8 PO LONG, 2 1/2 PO LONG, FICHE, 1/8 PO, ACIER RAPIDE
  • Item # GNF1011-57133
  • Mfr. Model # C57133
  • EHC: EHC :
  • This tap is made of high speed steel and has a 0.255 inch diameter, 1½ inch long shank. It is designed for use with all materials, and meets the standards for USCTI 302. This SPGP series tap has a bright finish, and has fractional inch measurements. It has right hand direction with a 2½ inch length. Plus it has three flutes and a straight shank.

    View more View less

    SDS Document Not Found

    For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

    CATALOGUE PAGE # N/A
  • GREENFIELD THREADING
  • SPIRAL POINT TAP, #8-32 THREAD, ¾ IN THREAD L, 2⅛ IN L, TIN, HIGH SPEED STEEL
  • Item # GNF356635
  • Mfr. Model # 356635
  • EHC: EHC :
  • This tap is made of high speed steel and has a 0.164 inch diameter, 1⅜ inch long shank. It is designed for use with all materials, and meets the standards for USCTI. This SPGP-TN series tap has a TiN finish, and has pipe measurements. It has right hand direction with a 2⅛ inch length. Plus it has two flutes and a straight shank.

    View more View less

    SDS Document Not Found

    For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

    CATALOGUE PAGE # N/A
  • GREENFIELD THREADING
  • SPIRAL POINT TAP, #10-24 THREAD, ½ IN THREAD L, 2⅜ IN L, HIGH SPEED STEEL, UNC
  • Item # GNF356662
  • Mfr. Model # 356662
  • EHC: EHC :
  • This tap is made of high speed steel and has a 0.19 inch diameter, 1½ inch long shank. It is designed for use with all materials, and meets the standards for USCTI. This SPGP series tap has a bright finish, and has pipe measurements. It has right hand direction with a 2⅜ inch length. Plus it has two flutes and a straight shank.

    View more View less

    SDS Document Not Found

    For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

    CATALOGUE PAGE # N/A
  • GREENFIELD THREADING
  • PURPOSE SPIRAL-POINT TAP, M10-1.50 THREAD, 31.75MM THREAD L, PLUG, 3 FLUTES, HSS
  • Item # GNF360942
  • Mfr. Model # 360942
  • EHC: EHC :
  • This tap is made of high speed steel and has a 1mm diameter shank. It is designed for use with stainless steel/steel, and meets the standards for USCTI. This tap has a TiN finish, and has metric measurements. It has right hand direction with a 74.61mm length. Plus it has three flutes and a straight shank.

    View more View less

    SDS Document Not Found

    For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

    CATALOGUE PAGE # N/A
  • GREENFIELD THREADING
  • SPIRAL POINT TAP, M5X0.8 THREAD, 22.22MM THREAD L, 60.32MM OVERALL L, HIGH SPEED STEEL
  • Item # GNF360868
  • Mfr. Model # 360868
  • EHC: EHC :
  • This tap is made of high speed steel and has a 5mm diameter, 1½ inch long shank. It is designed for use with all materials, and meets the standards for USCTI. This SPGP-TN series tap has a TiN finish, and has metric measurements. It has right hand direction with a 60.33mm length. Plus it has two flutes and a straight shank.

    View more View less

    SDS Document Not Found

    For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

    CATALOGUE PAGE # N/A
  • OSG
  • SPIRAL POINT TAP, ⅜"-24 THREAD SIZE, 11/16 IN THREAD L, 2 29/32 IN L, PLUG, 3 FLUTES
  • Item # OSG2886100
  • Mfr. Model # 2886100
  • EHC: EHC :
  • This tap is made of high speed steel and has a 0.381 inch diameter, 1.6940 inch long shank. It is designed for use with steel. This 287 series tap has a bright finish, and has fractional inch measurements. It is non-coolant through, has right hand direction with a 2-15/16 inch length. Plus it has three flutes and a straight shank.

    View more View less

    SDS Document Not Found

    For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

    CATALOGUE PAGE # N/A
  • OSG
  • SPIRAL POINT TAP, #8-32 THREAD, ⅜ IN THREAD L, 2 3/32 IN LENGTH, PLUG, RIGHT HAND
  • Item # OSG2885300
  • Mfr. Model # 2885300
  • EHC: EHC :
  • This tap is made of high speed steel and has a 0.168 inch diameter, 1.3650 inch long shank. It is designed for use with steel, and meets the standards for ANSI. This 287 series tap has a bright finish, and has pipe measurements. It is non-coolant through, has right hand direction with a 2⅛ inch length. Plus it has two flutes and a straight shank.

    View more View less

    SDS Document Not Found

    For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

    CATALOGUE PAGE # N/A
  • OSG
  • SPIRAL POINT TAP, #10-24 THREAD, ½ IN THREAD L, 2 11/32 IN L, PLUG, RIGHT HAND
  • Item # OSG2885400
  • Mfr. Model # 2885400
  • EHC: EHC :
  • This tap is made of high speed steel and has a 0.194 inch diameter, 1.4960 inch long shank. It is designed for use with steel, and meets the standards for ANSI. This 287 series tap has a bright finish, and has pipe measurements. It is non-coolant through, has right hand direction with a 2⅜ inch length. Plus it has two flutes and a straight shank.

    View more View less

    SDS Document Not Found

    For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

    CATALOGUE PAGE # N/A
  • OSG
  • SPIRAL POINT TAP, 5/16"-18 THREAD, 11/16 IN THREAD L, 2 23/32 IN L, PLUG, 2B/H3
  • Item # OSG2885800
  • Mfr. Model # 2885800
  • EHC: EHC :
  • This tap is made of high speed steel and has a 0.318 inch diameter, 1.5910 inch long shank. It is designed for use with steel, and meets the standards for ANSI. This 287 series tap has a bright finish, and has fractional inch measurements. It is non-coolant through, has right hand direction with a 2-23/32 inch length. Plus it has two flutes and a straight shank.

    View more View less

    SDS Document Not Found

    For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

    CATALOGUE PAGE # N/A
  • OSG
  • SPIRAL POINT TAP, #10-32 THREAD, ½ IN THREAD L, 2 11/32 IN L, PLUG, RIGHT HAND
  • Item # OSG2885500
  • Mfr. Model # 2885500
  • EHC: EHC :
  • This tap is made of high speed steel and has a 0.194 inch diameter, 1.4960 inch long shank. It is designed for use with steel, and meets the standards for ANSI. This 287 series tap has a bright finish, and has pipe measurements. It is non-coolant through, has right hand direction with a 2⅜ inch length. Plus it has two flutes and a straight shank.

    View more View less

    SDS Document Not Found

    For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

    CATALOGUE PAGE # N/A
Results per page :  16 | 32 | 48

Add to Order List

Your items were added

Your items were added to some lists

Max quantity exceeded. The item could not be added to the following List(s)

No Existing List Found. Please Create New List below.

Your list has been created

Please select a list