This Millermatic 252 MIG welding package is model 951961 and features argon mix regulator, dual EZ-change low cylinder rack with elevated gun and cable rack, extra contact tips, factory-installed running gear with EZ-ch and more and includes 0.03/0.035 inch reversible drive rolls, 10 foot power cord and plug, 10 foot work cable and clamp, 15 foot 250 a MDX-250 MIG gun and more.
Technical Specs
ItemMIG Welding Package
Input Voltage230V AC, 460V AC, 575V AC
Welding ModeCV
Input Frequency60 Hz
For Wire TypeFlux-Cored, Solid
Maximum Wire Feed Speed17.8 m/min
MIG Welding Output @ Duty Cycle200 A @ 24V DC, 60%, 250 A @ 26.5V DC, 40%
Weight205 lb
ColourBlue
For Material TypeAluminum, Stainless Steel, Steel
For Minimum Material Thickness0.6 mm (Mild Steel), 14 ga (Aluminum)
MIG Welding Minimum Output Current30 A
Minimum Wire Feed Speed1.3 m/min
Overall Height30 in
Plug Type6-50P
Power Cord Length10 ft
Amperage Range30 to 300 A
SeriesMillermatic 252
PhaseSingle-Phase
PolarityDC
Welding ProcessesFlux-Cored, MIG
Maximum Wire Diameter0.045 in (Flux-Cored), 0.045 in (Solid Steel), 0.045 in (Stainless), 1.2 mm (Flux-Cored), 1.2 mm (Solid Steel), 1.2 mm (Stainless)
Model951961
Includes0.03/0.035 in Reversible Drive Rolls, 10 ft (3 m) Power Cord and Plug, 10 ft (3 m) Work Cable and Clamp, 15 ft (4.5 m) 250 a MDX(TM)-250 MIG gun with Bernard(R) AccuLock(TM) MDX Consumables for 0.03/0.035 in (0.8/0.9 mm) Wire, Argon Mix Regulator/Flow Gauge and Hose, Dual EZ-Change(TM) Low Cylinder Rack with Elevated Gun and Cable Rack #300337, Extra Contact Tips, Factory-Installed Running Gear with EZ-Change(TM) Single Low Cylinder Rack, Millermatic(R) 252, Spoolmatic 30A #130831
ApplicationFarm, Home and Industrial Light, Maintenance and Repair, Metal Fabrication
FeaturesArgon Mix Regulator, Dual EZ-Change(TM) Low Cylinder Rack with Elevated Gun and Cable Rack, Extra Contact tips, Factory-Installed Running Gear with EZ-Change(TM) Single Low Cylinder Rack, Flow Gauge and Hose, Millermatic(R) 252, Power Cord and Plug, Work Cable and Clamp
For Maximum Material Thickness3/8 in (Aluminum), 1/2 in (Mild Steel)
MIG Welding Maximum Output Current300 A
Minimum Wire Diameter0.023 in (Solid Steel), 0.023 in (Stainless), 0.03 in (Flux Cored), 0.6 mm (Solid Steel), 0.6 mm (Stainless), 0.8 mm (Flux-Cored)