Profile Router Bits

This straight router bit is made of high-speed steel. It has a 3/16-inch cutter diameter, ⅛-inch cut length, 1 21/50-inch overall length, ⅛-inch shank diameter, and one flute. It is for use with Dremel #230/#330 router attachments and #231 shaper/router table.

This straight router bit is made of high-speed steel. It has a 3/16-inch cutter diameter, ⅛-inch cut length, 1 21/50-inch overall length, ⅛-inch shank diameter, and one flute. It is for use with Dremel #230/#330 router attachments and #231 shaper/router table.

This straight-cut profile router bit has a carbide tip. It has a 1 5/16-inch shank length, ¼-inch shank diameter, ⅜-inch cutting diameter, and 2 5/16-inch overall length. The bit has two flutes of one-inch and is suitable for roughing/finishing the end mill.

This straight-cut profile router bit has a carbide tip. It has a 1 5/16-inch shank length, ¼-inch shank diameter, ⅜-inch cutting diameter, and 2 5/16-inch overall length. The bit has two flutes of one-inch and is suitable for roughing/finishing the end mill.

This rabbeting-cut profile router bit has a carbide tip. It has a 1⅝-inch shank length, ½-inch shank diameter, 1¼-inch cutting diameter, and 2½-inch overall length. The bit has two flutes of ½-inch and is suitable for roughing/finishing the end mill.

This rabbeting-cut profile router bit has a carbide tip. It has a 1⅝-inch shank length, ½-inch shank diameter, 1¼-inch cutting diameter, and 2½-inch overall length. The bit has two flutes of ½-inch and is suitable for roughing/finishing the end mill.

This dovetail bit is made of carbide. It has a 1⅞-inch overall length, ½-inch cutter diameter, ¼-inch shank diameter, ½-inch cut length, and a maximum speed of 24000 RPM. The 14 degree bit cuts all composition materials, plywood, hardwood, and softwood.

This dovetail bit is made of carbide. It has a 1⅞-inch overall length, ½-inch cutter diameter, ¼-inch shank diameter, ½-inch cut length, and a maximum speed of 24000 RPM. The 14 degree bit cuts all composition materials, plywood, hardwood, and softwood.

This cove bit is made of carbide. It has a ¼-inch radius, ⅜-inch bearing diameter, 2 3/16-inch overall length, 7/8-inch cutter diameter, ¼-inch shank diameter, ½-inch cut length, one flute, and a maximum speed of 24000 RPM. The roughing individual drilling bit cuts all composition materials, plywood, hardwoods, and softwoods.

This cove bit is made of carbide. It has a ¼-inch radius, ⅜-inch bearing diameter, 2 3/16-inch overall length, 7/8-inch cutter diameter, ¼-inch shank diameter, ½-inch cut length, one flute, and a maximum speed of 24000 RPM. The roughing individual drilling bit cuts all composition materials, plywood, hardwoods, and softwoods.

This flush trim-cut profile router bit has a carbide tip. It has one-inch shank length, ¼-inch shank diameter, one-inch flute, ¼-inch cutting length, and 1 9/16-inch overall length. The bit has roughing/finishing end mill and is for use with trimming high-pressure plastic laminates flush with the edge band or substrate.

This flush trim-cut profile router bit has a carbide tip. It has one-inch shank length, ¼-inch shank diameter, one-inch flute, ¼-inch cutting length, and 1 9/16-inch overall length. The bit has roughing/finishing end mill and is for use with trimming high-pressure plastic laminates flush with the edge band or substrate.

This flush trim-cut profile router bit has a carbide tip. It has a 1¼-inch shank length, ¼-inch shank diameter, ¼-inch cutting diameter, and two-inch overall length. The bit has a flute of ⅜-inch and is suitable for roughing/finishing the end mill.

This flush trim-cut profile router bit has a carbide tip. It has a 1¼-inch shank length, ¼-inch shank diameter, ¼-inch cutting diameter, and two-inch overall length. The bit has a flute of ⅜-inch and is suitable for roughing/finishing the end mill.

This straight bit is made of carbide tipped. It has a 2½-inch overall length, ¾-inch cutter diameter, ½-inch shank diameter, one-inch cut length, two flutes, and a maximum speed of 24000 RPM. The straight bit cuts all composition materials, plywood, hardwood, and soft wood. It features precise hook and shear angles.

This straight bit is made of carbide tipped. It has a 2½-inch overall length, ¾-inch cutter diameter, ½-inch shank diameter, one-inch cut length, two flutes, and a maximum speed of 24000 RPM. The straight bit cuts all composition materials, plywood, hardwood, and soft wood. It features precise hook and shear angles.

This straight router bit is made of carbide tipped. It has a 2⅛-inch overall length, ¾-inch cutter diameter, ¼-inch shank diameter, ¾-inch cut length, two flutes, and a maximum speed of 24000 RPM. The straight bit cuts all composition materials, plywood, hardwood, and soft wood. It features precise hook and shear angles.

This straight router bit is made of carbide tipped. It has a 2⅛-inch overall length, ¾-inch cutter diameter, ¼-inch shank diameter, ¾-inch cut length, two flutes, and a maximum speed of 24000 RPM. The straight bit cuts all composition materials, plywood, hardwood, and soft wood. It features precise hook and shear angles.

This chamfer bit is made of carbide. It has a 2 9/16-inch overall length, 1¾-inch cutter diameter, ½-inch shank diameter, ⅝-inch cut length, two flutes, and a maximum speed of 16000 RPM. The 45 degree bit cuts all composition materials, plywood, hardwoods, and softwoods.

This chamfer bit is made of carbide. It has a 2 9/16-inch overall length, 1¾-inch cutter diameter, ½-inch shank diameter, ⅝-inch cut length, two flutes, and a maximum speed of 16000 RPM. The 45 degree bit cuts all composition materials, plywood, hardwoods, and softwoods.

This straight bit is made of carbide tipped. It has two-inch overall length, a 3/16-inch cutter diameter, a ¼-inch shank diameter, a ½-inch cut length, a maximum speed of 24000 RPM, and one flute. The straight bit cuts all composition materials, plywood, hardwood, and soft wood.

This straight bit is made of carbide tipped. It has two-inch overall length, a 3/16-inch cutter diameter, a ¼-inch shank diameter, a ½-inch cut length, a maximum speed of 24000 RPM, and one flute. The straight bit cuts all composition materials, plywood, hardwood, and soft wood.

This straight bit is made of carbide tipped. It has a 2⅝-inch overall length, ⅜-inch cutter diameter, ½-inch shank diameter, one-inch cut length, two flutes, and a maximum speed of 24000 RPM. The straight bit cuts all composition materials, plywood, hardwood, and soft wood. It features precise hook and shear angles.

This straight bit is made of carbide tipped. It has a 2⅝-inch overall length, ⅜-inch cutter diameter, ½-inch shank diameter, one-inch cut length, two flutes, and a maximum speed of 24000 RPM. The straight bit cuts all composition materials, plywood, hardwood, and soft wood. It features precise hook and shear angles.

This hinge mortise bit is made of carbide. It has a 2⅛-inch overall length, 1¼-inch cutter diameter, ¼-inch shank diameter, 29/64-inch cut length, two flutes, and a maximum speed of 18000 RPM. The straight bit cuts all composition materials, plywood, hardwood, and soft wood. It features down shear design and deep center gullets.

This hinge mortise bit is made of carbide. It has a 2⅛-inch overall length, 1¼-inch cutter diameter, ¼-inch shank diameter, 29/64-inch cut length, two flutes, and a maximum speed of 18000 RPM. The straight bit cuts all composition materials, plywood, hardwood, and soft wood. It features down shear design and deep center gullets.

This rabbeting bit is made of carbide. It has a 2¼-inch overall length, 1¼-inch cutter diameter, ½-inch shank diameter, ⅜-inch cut length, one flute, and a maximum speed of 18000 RPM. The roughing individual drilling bit cuts all composition materials, plywood, hardwoods, and softwoods.

This rabbeting bit is made of carbide. It has a 2¼-inch overall length, 1¼-inch cutter diameter, ½-inch shank diameter, ⅜-inch cut length, one flute, and a maximum speed of 18000 RPM. The roughing individual drilling bit cuts all composition materials, plywood, hardwoods, and softwoods.

This rounding over bit is made of carbide. It has a ¼-inch radius, 2 3/16-inch overall length, one-inch cutter diameter, a ¼-inch shank diameter, a ½-inch cut length, two flutes, and a maximum speed of 18000 RPM. The roughing individual drilling bit cuts all composition materials, plywood, hardwoods, and softwoods.

This rounding over bit is made of carbide. It has a ¼-inch radius, 2 3/16-inch overall length, one-inch cutter diameter, a ¼-inch shank diameter, a ½-inch cut length, two flutes, and a maximum speed of 18000 RPM. The roughing individual drilling bit cuts all composition materials, plywood, hardwoods, and softwoods.

This rounding over bit is made of carbide. It has a ⅜-inch radius, 2⅝-inch overall length, 1¼-inch cutter diameter, ½-inch shank diameter, ⅝-inch cut length, and two flutes. The finishing individual drilling bit cuts all composition materials, plywood, hardwoods, and softwoods.

This rounding over bit is made of carbide. It has a ⅜-inch radius, 2⅝-inch overall length, 1¼-inch cutter diameter, ½-inch shank diameter, ⅝-inch cut length, and two flutes. The finishing individual drilling bit cuts all composition materials, plywood, hardwoods, and softwoods.