Product ITEM is unavailable. See products from the same category below.
General Purpose Diagonal-Cutting Pliers
General purpose diagonal-cutting pliers trim wire and zip ties, shear through thin screws and nails, and nip and strip wire jackets in applications where insulated or non-sparking pliers aren't required. Also known as wire cutters, their blade-like cutting edges are offset from the handles to cut closely against surfaces. They concentrate leverage in their short jaws to maximize cutting force.
Lightweight flush cutter. Shears wire up to 18 AWG producing a flat, flush cut. Shear cutting greatly reduces cutting effort and minimizes fly-off. Cushioned grips and steel return spring for increased comfort during repetitive cutting. Ultra slim profile increases access in confined areas. 5 in.
Lightweight flush cutter. Shears wire up to 18 AWG producing a flat, flush cut. Shear cutting greatly reduces cutting effort and minimizes fly-off. Cushioned grips and steel return spring for increased comfort during repetitive cutting. Ultra slim profile increases access in confined areas. 5 in.
8 inch high leverage diagonal cutter with ultra durable 2000 series blades designed and heat treated to cut bolts, nails and hard wires without damage. 36% greater cutting/gripping power. Standard-bevel cutting knives. Plastic-dipped hand-form style handles.
8 inch high leverage diagonal cutter with ultra durable 2000 series blades designed and heat treated to cut bolts, nails and hard wires without damage. 36% greater cutting/gripping power. Standard-bevel cutting knives. Plastic-dipped hand-form style handles.
This diagonal cutting pliers has a length of 8 inches and is not insulated. The handle is blue and has a pistol grip style/type. It features corrosion-resistance, hardened and tempered steel construction, dipped handle, cushion-grip handle and meets the standards for ASME B107.31M. In addition, it is non-sparking, and is not tether ready with a standard cushion grip.
This diagonal cutting pliers has a length of 8 inches and is not insulated. The handle is blue and has a pistol grip style/type. It features corrosion-resistance, hardened and tempered steel construction, dipped handle, cushion-grip handle and meets the standards for ASME B107.31M. In addition, it is non-sparking, and is not tether ready with a standard cushion grip.
4-1/4 inch midget tapered nose diagonal cutting plier. Miniature jaw for close-quarter work with maximum visibility. Sharp pointed nose for precise tip cutting. Spring-loaded action for self-opening.
4-1/4 inch midget tapered nose diagonal cutting plier. Miniature jaw for close-quarter work with maximum visibility. Sharp pointed nose for precise tip cutting. Spring-loaded action for self-opening.
5 inch midget standard diagonal cutter with tapered nose. This is the basic Klein diagonal cutting pliers with tapered nose and standard-bevel cutting knives. Red plastic-dipped handles.
5 inch midget standard diagonal cutter with tapered nose. This is the basic Klein diagonal cutting pliers with tapered nose and standard-bevel cutting knives. Red plastic-dipped handles.
This cutting pliers has a length of 8 5/32 inch, plus it weighs 11.2 ounce and is insulated. The handle is grey/orange. It features cuts acsr, screws, nails and most hardened wire. induction hardened for long life, multicolou and more and meets the standards for ASTM F1505, IEC 60900.
This cutting pliers has a length of 8 5/32 inch, plus it weighs 11.2 ounce and is insulated. The handle is grey/orange. It features cuts acsr, screws, nails and most hardened wire. induction hardened for long life, multicolou and more and meets the standards for ASTM F1505, IEC 60900.
This diagonal cutting pliers has a length of 8⅛ inches and is not insulated. The handle is multicolour and has a standard style/type. It meets the standards for ASME B107.32M. In addition, it is non-sparking, and is not tether ready with a standard cushion grip.
This diagonal cutting pliers has a length of 8⅛ inches and is not insulated. The handle is multicolour and has a standard style/type. It meets the standards for ASME B107.32M. In addition, it is non-sparking, and is not tether ready with a standard cushion grip.
High-leverage diagonal-cutting pliers, angled head design for easy working in confined spaces, hooked handle for improved grip, high-leverage design. Rivet is closer to the cutting edge. 9 inches.
High-leverage diagonal-cutting pliers, angled head design for easy working in confined spaces, hooked handle for improved grip, high-leverage design. Rivet is closer to the cutting edge. 9 inches.
These pliers has a length of 8 inches and is not insulated. The handle is multicolour. It features lasting edge laser-hardened. In addition, it is made of steel, plus it is non-sparking, and is tether ready with a deluxe cushion grip. These pliers is designed for: bolt, nails, wire.
These pliers has a length of 8 inches and is not insulated. The handle is multicolour. It features lasting edge laser-hardened. In addition, it is made of steel, plus it is non-sparking, and is tether ready with a deluxe cushion grip. These pliers is designed for: bolt, nails, wire.
This diagonal cutting pliers has a length of 6 inch, plus it weighs 0.45 pounds and is not insulated. The handle is tan and has a standard style/type. It features hand sharpened. In addition, it is made of stainless steel, has a polished finish, plus it is non-sparking, and is not tether ready. This diagonal cutting pliers is designed for: copper, soft steel.
This diagonal cutting pliers has a length of 6 inch, plus it weighs 0.45 pounds and is not insulated. The handle is tan and has a standard style/type. It features hand sharpened. In addition, it is made of stainless steel, has a polished finish, plus it is non-sparking, and is not tether ready. This diagonal cutting pliers is designed for: copper, soft steel.
This 2000 series high leverage diagonal cutting pliers has a length of 8⅛ inch, plus it weighs 9.8 ounce and is not insulated. The handle is multicolour and has a standard style/type. It features bevelled cutting edges, short jaws. In addition, it is made of steel, plus it is non-sparking, and is not tether ready with a deluxe cushion grip. This high leverage diagonal cutting pliers is designed for: nails, screws.
This 2000 series high leverage diagonal cutting pliers has a length of 8⅛ inch, plus it weighs 9.8 ounce and is not insulated. The handle is multicolour and has a standard style/type. It features bevelled cutting edges, short jaws. In addition, it is made of steel, plus it is non-sparking, and is not tether ready with a deluxe cushion grip. This high leverage diagonal cutting pliers is designed for: nails, screws.
This 74 series high leverage diagonal cutting pliers has a length of 10 inch, plus it weighs 0.96 pounds and is not insulated. The handle is multicolour and has a standard style/type. It features high cutting performance, optimum coordination of the cutting edge angle and transmission ratio and meets the standards for ISO 5749. In addition, it is made of chrome vanadium steel, has a polished finish, plus it is non-sparking, and is tether ready with a bi-material deluxe cushion grip.
This 74 series high leverage diagonal cutting pliers has a length of 10 inch, plus it weighs 0.96 pounds and is not insulated. The handle is multicolour and has a standard style/type. It features high cutting performance, optimum coordination of the cutting edge angle and transmission ratio and meets the standards for ISO 5749. In addition, it is made of chrome vanadium steel, has a polished finish, plus it is non-sparking, and is tether ready with a bi-material deluxe cushion grip.
This 2000 series high leverage diagonal cutting pliers has a length of 8⅛ inch, plus it weighs 11.2 ounce and is not insulated. The handle is multicolour and has a standard style/type. It features bevelled cutting edges, short jaws. In addition, it is made of steel, plus it is non-sparking, and is not tether ready with a deluxe cushion grip. This high leverage diagonal cutting pliers is designed for: nails, screws.
This 2000 series high leverage diagonal cutting pliers has a length of 8⅛ inch, plus it weighs 11.2 ounce and is not insulated. The handle is multicolour and has a standard style/type. It features bevelled cutting edges, short jaws. In addition, it is made of steel, plus it is non-sparking, and is not tether ready with a deluxe cushion grip. This high leverage diagonal cutting pliers is designed for: nails, screws.
This Not Applicable series pliers has a length of 6 inch, plus it weighs 0.47 pounds and is not insulated. The handle is red. It features lasting edge laser-hardened. In addition, it is made of steel, has a coated finish, plus it is non-sparking, and is tether ready with a plastisol standard cushion grip. These pliers is designed for: bolt, nails, wire.
This Not Applicable series pliers has a length of 6 inch, plus it weighs 0.47 pounds and is not insulated. The handle is red. It features lasting edge laser-hardened. In addition, it is made of steel, has a coated finish, plus it is non-sparking, and is tether ready with a plastisol standard cushion grip. These pliers is designed for: bolt, nails, wire.
To view Availability for another location, please enter postal code below
Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order.
