Adhesive-lined heat shrink tubing covers wire and cable, and when heat is applied, it shrinks the tubing and melts the adhesive to create tightly sealed bundles. The melted adhesive wall also creates a moisture-resistant barrier that allows this tubing to be used in wet environments. Also known as dual-wall heat shrink tubing, it is used across a wide variety of applications to insulate, protect, bundle, and provide strain relief for wire and cable.
Heavy wall heat shrink tubing. 4 in. length. Rated to 1000 V UL listed 486 D. Cut to length. Flexible and highly split resistant. Provides mechanical and environmental protection. CSA certified.
Heavy wall heat shrink tubing. 4 in. length. Rated to 1000 V UL listed 486 D. Cut to length. Flexible and highly split resistant. Provides mechanical and environmental protection. CSA certified.
Thin walled heat shrink tubing, black in colour, flame retardant poly, measuring 1/4 inch by four feet in length. Internal EPS-300 adhesive lined walls, able to form a flexible bond with rubber, plastic and metal. Three to one shrink ratio, rated for use between minus 55 degrees celsius to 110 degrees celsius and rated to 900 volts.
Thin walled heat shrink tubing, black in colour, flame retardant poly, measuring 1/4 inch by four feet in length. Internal EPS-300 adhesive lined walls, able to form a flexible bond with rubber, plastic and metal. Three to one shrink ratio, rated for use between minus 55 degrees celsius to 110 degrees celsius and rated to 900 volts.
This heat shrink tubing is made of cross-linked polyolefin with adhesive, and is red. In addition, it meets the standards for UL 486D. It has length of 1.5 inch. 230 Degrees F maximum temperature, and -67 Degrees F minimum temperature.
This heat shrink tubing is made of cross-linked polyolefin with adhesive, and is red. In addition, it meets the standards for UL 486D. It has length of 1.5 inch. 230 Degrees F maximum temperature, and -67 Degrees F minimum temperature.
A bag of 10 heat shrink tubes, these measure six inches in length. Each unit of tubing is black in colour with adhesive-lined walls and is able to form a flexible bond with rubber, plastic, and metal. Made of flame-retardent polyolefin with a 3:1 shrink ratio and a 700V dielectric strength, this tubing is rated for use between -55 Degrees C and 110 Degrees C, meeting CSA standards.
A bag of 10 heat shrink tubes, these measure six inches in length. Each unit of tubing is black in colour with adhesive-lined walls and is able to form a flexible bond with rubber, plastic, and metal. Made of flame-retardent polyolefin with a 3:1 shrink ratio and a 700V dielectric strength, this tubing is rated for use between -55 Degrees C and 110 Degrees C, meeting CSA standards.
Heavy wall heat shrink tubing. 4 in. length. Rated to 1000 V UL listed 486 D. Cut to length. Flexible and highly split resistant. Provides mechanical and environmental protection. CSA certified.
Heavy wall heat shrink tubing. 4 in. length. Rated to 1000 V UL listed 486 D. Cut to length. Flexible and highly split resistant. Provides mechanical and environmental protection. CSA certified.
1/4 inch by six inches of black dual wall Thermfix Plus heat shrink tubing that is semi-rigid and flame-retardant with a polyolefin jacket. There are six pieces per bag. The tubing also has an inner layer of specially formulated adhesive with a high shrink ratio of 4:1 and an extended operating temperature range from minus 40 degrees celsius up to 130 degrees celsius. Automotive industry approved, RoHS, CSA and UL compliant.
1/4 inch by six inches of black dual wall Thermfix Plus heat shrink tubing that is semi-rigid and flame-retardant with a polyolefin jacket. There are six pieces per bag. The tubing also has an inner layer of specially formulated adhesive with a high shrink ratio of 4:1 and an extended operating temperature range from minus 40 degrees celsius up to 130 degrees celsius. Automotive industry approved, RoHS, CSA and UL compliant.
Black one inch diameter by six inches in length heat shrink tubing that comes in a bag of eight pieces. Its internal adhesive lined walls made with flame retardant polyolefin is able to form a flexible bond with rubber, plastic and metal. It has a 3:1 shrink ratio, a 600 volt dielectric strength, and is rated for use between -55 Degrees C and 110 Degrees C.
Black one inch diameter by six inches in length heat shrink tubing that comes in a bag of eight pieces. Its internal adhesive lined walls made with flame retardant polyolefin is able to form a flexible bond with rubber, plastic and metal. It has a 3:1 shrink ratio, a 600 volt dielectric strength, and is rated for use between -55 Degrees C and 110 Degrees C.
Heavy wall heat shrink tubing. 4 in. length. Rated to 1000 V UL listed 486 D. Cut to length. Flexible and highly split resistant. Provides mechanical and environmental protection. CSA certified.
Heavy wall heat shrink tubing. 4 in. length. Rated to 1000 V UL listed 486 D. Cut to length. Flexible and highly split resistant. Provides mechanical and environmental protection. CSA certified.
3/8 inch by six inches of black dual wall Thermfix Plus heat shrink tubing that is semi-rigid and flame-retardant with a polyolefin jacket. Automotive industry approved, RoHS, CSA and UL compliant. There are six pieces per bag. The tubing also has an inner layer of specially formulated adhesive with a high shrink ratio of 4:1 and an extended operating temperature range from minus 40 degrees celsius up to 130 degrees celsius.
3/8 inch by six inches of black dual wall Thermfix Plus heat shrink tubing that is semi-rigid and flame-retardant with a polyolefin jacket. Automotive industry approved, RoHS, CSA and UL compliant. There are six pieces per bag. The tubing also has an inner layer of specially formulated adhesive with a high shrink ratio of 4:1 and an extended operating temperature range from minus 40 degrees celsius up to 130 degrees celsius.
3/4 inch by six inches of black dual wall Thermfix Plus heat shrink tubing that is semi-rigid and flame-retardant with a polyolefin jacket. The tubing also has an inner layer of specially formulated adhesive with a high shrink ratio of 4:1 and an extended operating temperature range from minus 40 degrees celsius up to 130 degrees celsius. Automotive industry approved, RoHS, CSA and UL compliant. There are six pieces per bag.
3/4 inch by six inches of black dual wall Thermfix Plus heat shrink tubing that is semi-rigid and flame-retardant with a polyolefin jacket. The tubing also has an inner layer of specially formulated adhesive with a high shrink ratio of 4:1 and an extended operating temperature range from minus 40 degrees celsius up to 130 degrees celsius. Automotive industry approved, RoHS, CSA and UL compliant. There are six pieces per bag.
1/2 inch by six inches of black dual wall Thermfix Plus heat shrink tubing that is semi-rigid and flame-retardant with a polyolefin jacket. Automotive industry approved, RoHS, CSA and UL compliant. There are six pieces per bag. The tubing also has an inner layer of specially formulated adhesive with a high shrink ratio of 4:1 and an extended operating temperature range from minus 40 degrees celsius up to 130 degrees celsius.
1/2 inch by six inches of black dual wall Thermfix Plus heat shrink tubing that is semi-rigid and flame-retardant with a polyolefin jacket. Automotive industry approved, RoHS, CSA and UL compliant. There are six pieces per bag. The tubing also has an inner layer of specially formulated adhesive with a high shrink ratio of 4:1 and an extended operating temperature range from minus 40 degrees celsius up to 130 degrees celsius.
Six pieces in assorted sizes of black dual wall Thermfix Plus heat shrink tubing that is semi-rigid and flame-retardant with a polyolefin jacket. The tubing also has an inner layer of specially formulated adhesive with a high shrink ratio of 4:1 and an extended operating temperature range from minus 40 degrees celsius up to 130 degrees celsius. Automotive industry approved, RoHS, CSA and UL compliant.
Six pieces in assorted sizes of black dual wall Thermfix Plus heat shrink tubing that is semi-rigid and flame-retardant with a polyolefin jacket. The tubing also has an inner layer of specially formulated adhesive with a high shrink ratio of 4:1 and an extended operating temperature range from minus 40 degrees celsius up to 130 degrees celsius. Automotive industry approved, RoHS, CSA and UL compliant.
To view Availability for another location, please enter postal code below
Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order.
