The wire size as measured in American Wire Gauge (AWG) that the tool can crimp. The higher the AWG value, the thinner the wire.
Suggested results for "SUGGEST-ITEM"
Product ITEM is unavailable. See products from the same category below.
Wire Connector & Terminal Crimpers
Wire connector and terminal crimpers press splice connectors, terminals, and disconnects onto wire. They crimp smaller connectors and terminals than lug and splice crimpers. Slots or dies in the crimper jaws are shaped to cradle the connectors and terminals and press them onto the wire for a tight bond.
9-3/4 inch crimping tool. Thin nose permits work in confined space. Crimping die marked for insulated/non-insulated solderless terminals and connectors. Accommodates wire from #10-22 AWG. Wire cutter in nose. Red plastic-dipped handles for comfort.
9-3/4 inch crimping tool. Thin nose permits work in confined space. Crimping die marked for insulated/non-insulated solderless terminals and connectors. Accommodates wire from #10-22 AWG. Wire cutter in nose. Red plastic-dipped handles for comfort.
This crimper has a length of 9½ inch, plus it weighs 0.94 pounds and is not insulated. It features designed for crimping of both insulated and not insulated solderless connections and terminals and meets the standards for ASME. In addition, it is made of steel, with a standard cushion grip. This crimper is designed for: electrical wire and cable and includes two m18 redlithium cp2.0 batteries, five tool roll-1 technicians plier set with tool roll, fi and more, wire cutter.
This crimper has a length of 9½ inch, plus it weighs 0.94 pounds and is not insulated. It features designed for crimping of both insulated and not insulated solderless connections and terminals and meets the standards for ASME. In addition, it is made of steel, with a standard cushion grip. This crimper is designed for: electrical wire and cable and includes two m18 redlithium cp2.0 batteries, five tool roll-1 technicians plier set with tool roll, fi and more, wire cutter.
These high-leverage crimping pliers have a fish tape puller and a wire crimper. With an overall length of 9.5 inches, these pliers have a jaw length of 1 15/16 inches. With a rubber handle for grip, these pliers feature an integrated reaming head.
These high-leverage crimping pliers have a fish tape puller and a wire crimper. With an overall length of 9.5 inches, these pliers have a jaw length of 1 15/16 inches. With a rubber handle for grip, these pliers feature an integrated reaming head.
This ratchet wire crimper has a length of 9 inch, plus it weighs 1.3 pounds and is insulated, and is compatible with copper cable. It features built-in ratchet ensures full-cycle crimping for a uniform crimp every time, dial adjusts the and more. In addition, it is made of steel, plus it is not non-sparking, and is not tether ready.
This ratchet wire crimper has a length of 9 inch, plus it weighs 1.3 pounds and is insulated, and is compatible with copper cable. It features built-in ratchet ensures full-cycle crimping for a uniform crimp every time, dial adjusts the and more. In addition, it is made of steel, plus it is not non-sparking, and is not tether ready.
This crimper has a length of 9½ inches and is not insulated. It features plastic coated and meets the standards for RoHS. In addition, it is made of steel, with a standard cushion grip. This crimper is designed for: electrical wire and cable, wire cutter.
This crimper has a length of 9½ inches and is not insulated. It features plastic coated and meets the standards for RoHS. In addition, it is made of steel, with a standard cushion grip. This crimper is designed for: electrical wire and cable, wire cutter.
This ratchet crimper has a length of 10½ inches and is insulated. It features ergonomically advanced, soft, over-moulded handle grips. In addition, it has a deluxe cushion grip. This ratchet crimper is designed for: electrical wire and cable and includes colour-coded die nests, die embossment, terminal locator.
This ratchet crimper has a length of 10½ inches and is insulated. It features ergonomically advanced, soft, over-moulded handle grips. In addition, it has a deluxe cushion grip. This ratchet crimper is designed for: electrical wire and cable and includes colour-coded die nests, die embossment, terminal locator.
This crimper has a length of 9⅝ inches and is not insulated. It features shure-stake mechanism prevents the dies from releasing the terminal until the proper compress and more and meets the standards for UL E9809. In addition, it is made of steel, with a standard cushion grip. This crimper is designed for: electrical wire and cable and includes wire cutter, wire cutter.
This crimper has a length of 9⅝ inches and is not insulated. It features shure-stake mechanism prevents the dies from releasing the terminal until the proper compress and more and meets the standards for UL E9809. In addition, it is made of steel, with a standard cushion grip. This crimper is designed for: electrical wire and cable and includes wire cutter, wire cutter.
Journeyman(TM) crimping/cutting tool. Designed to crimp insulated and non-insulated 10 to 22 AWG solderless terminals and connectors. Contoured thumb area for additional comfort and positive feel. Hot-riveted joint ensures smooth action and no handle wobble.
Journeyman(TM) crimping/cutting tool. Designed to crimp insulated and non-insulated 10 to 22 AWG solderless terminals and connectors. Contoured thumb area for additional comfort and positive feel. Hot-riveted joint ensures smooth action and no handle wobble.
This ratchet crimper has a length of 6⅛ inch, plus it weighs 14.4 ounce and is not insulated, and is compatible with Cat3, Cat5e, Cat6/6A. In addition, it is made of steel, with a deluxe cushion grip. This ratchet crimper is designed for: voice and data cable and includes wire cutter, wire stripper, wire cutter, wire stripper.
This ratchet crimper has a length of 6⅛ inch, plus it weighs 14.4 ounce and is not insulated, and is compatible with Cat3, Cat5e, Cat6/6A. In addition, it is made of steel, with a deluxe cushion grip. This ratchet crimper is designed for: voice and data cable and includes wire cutter, wire stripper, wire cutter, wire stripper.
The best tool for solid Deutsch contact crimping. It will crimp a wide variety of contact sizes from 22-12 GA with no need to replace the dies or locators. The tool provides a solid eight-way indent crimp with little effort.
The best tool for solid Deutsch contact crimping. It will crimp a wide variety of contact sizes from 22-12 GA with no need to replace the dies or locators. The tool provides a solid eight-way indent crimp with little effort.
Repetitive high crimping quality due to precision dies and integral lock. Crimping pressure has been set in factory. High transmission of force thanks to lever action for fatigued reduced work. Good handling thanks to handle position, low weight, short design , and ergonomically shaped handles. Chrome Vanadium electric steel in special quality: oil-hardened
Repetitive high crimping quality due to precision dies and integral lock. Crimping pressure has been set in factory. High transmission of force thanks to lever action for fatigued reduced work. Good handling thanks to handle position, low weight, short design , and ergonomically shaped handles. Chrome Vanadium electric steel in special quality: oil-hardened
The new lever transmission reduced the handforce up to 30% compared to regular crimping pliers. Repetitive high crimping quality to precision dies and integral lock. Crimping pressure has been set precisely in the factory. Two hand operation for easy crimping of large conductor diameters. Easy handling as a result of well balanced center of gravity, angled head and ergonomically shaped handles.
The new lever transmission reduced the handforce up to 30% compared to regular crimping pliers. Repetitive high crimping quality to precision dies and integral lock. Crimping pressure has been set precisely in the factory. Two hand operation for easy crimping of large conductor diameters. Easy handling as a result of well balanced center of gravity, angled head and ergonomically shaped handles.
9-3/4 inch crimping tool for non-insulated solderless terminals and connectors sizes #10-22 AWG. Hardened wire cutter in nose. Tapered nose for working in confined spaces. Plastic-dipped handles: 1 red handle, 1 black to identify proper crimping position.
9-3/4 inch crimping tool for non-insulated solderless terminals and connectors sizes #10-22 AWG. Hardened wire cutter in nose. Tapered nose for working in confined spaces. Plastic-dipped handles: 1 red handle, 1 black to identify proper crimping position.
This crimper has a length of 9 inches and is not insulated. In addition, it is not non-sparking, and is not tether ready with a standard cushion grip. This crimper is designed for: electrical wire and cable.
This crimper has a length of 9 inches and is not insulated. In addition, it is not non-sparking, and is not tether ready with a standard cushion grip. This crimper is designed for: electrical wire and cable.
This crimper has a length of 10¾ inch, plus it weighs 1.65 pounds and is not insulated. It features multi-position locator, trapezoid profile designed for panduit ferrules and meets the standards for CSA, UL. In addition, it is made of steel, with a deluxe cushion grip. This crimper is designed for: electrical wire and cable and includes die.
This crimper has a length of 10¾ inch, plus it weighs 1.65 pounds and is not insulated. It features multi-position locator, trapezoid profile designed for panduit ferrules and meets the standards for CSA, UL. In addition, it is made of steel, with a deluxe cushion grip. This crimper is designed for: electrical wire and cable and includes die.
To view Availability for another location, please enter postal code below
Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order.
