Machining
Drilling & Holemaking
Drill Bits
Drill Bits for Metal & Plastic
Jobber-Length Drill Bits
Vanadium High-Speed Steel Jobber-Length Drill Bits
Close

Filter Results By

Search within these results

Shop By

In Stock Now (50)

Brand

CLEVELAND CLEVELAND (607)

Price

Under $10 Under $10 (334)
$10 - $15 $10 - $15 (93)
$15 - $20 $15 - $20 (44)
$20 - $25 $20 - $25 (37)
$25 - $30 $25 - $30 (28)
$30 - $35 $30 - $35 (10)
$35 - $40 (4)

$40 - $50 (11)

$50 - $60 (7)

$60 - $70 (6)

$70 - $80 (5)

$80 - $90 (7)

$90 - $100 (2)

$100 - $200 (18)

$200 - $300 (1)
View more View less

Measurement System

Fractional Inch Fractional Inch (102)
Letter Letter (75)
Metric Metric (253)
Wire Wire (177)

Drill Bit Size

#1 #1 (3)
#10 #10 (3)
#11 #11 (3)
#12 #12 (6)
#13 #13 (5)
#14 #14 (3)
#15 (3)

#16 (3)

#17 (3)

#18 (3)

#19 (3)

#2 (3)

#20 (3)

#21 (3)

#22 (3)

#23 (3)

#24 (3)

#25 (3)

#26 (3)

#27 (3)

#28 (3)

#29 (3)

#3 (3)

#30 (3)

#31 (3)

#32 (3)

#33 (3)

#34 (3)

#35 (3)

#36 (3)

#37 (3)

#38 (3)

#39 (3)

#4 (3)

#40 (3)

#41 (3)

#42 (3)

#43 (3)

#44 (3)

#45 (3)

#46 (3)

#47 (3)

#48 (3)

#49 (3)

#5 (3)

#50 (3)

#51 (3)

#52 (3)

#53 (2)

#54 (2)

#55 (2)

#56 (2)

#57 (2)

#58 (2)

#59 (2)

#6 (3)

#60 (2)

#7 (3)

#8 (3)

#9 (3)

1.00 mm (3)

1.05 mm (1)

1.10 mm (2)

1.15 mm (1)

1.20 mm (2)

1.25 mm (1)

1.30 mm (2)

1.35 mm (1)

1.40 mm (2)

1.45 mm (1)

1.50 mm (3)

1.55 mm (1)

1.60 mm (3)

1.65 mm (1)

1.70 mm (2)

1.75 mm (1)

1.80 mm (2)

1.85 mm (1)

1.90 mm (2)

1.95 mm (1)

1/16 in (3)

1/2 in (3)

1/4 in (3)

1/8 in (3)

10.00 mm (3)

10.20 mm (3)

10.50 mm (3)

10.80 mm (2)

11.00 mm (3)

11.50 mm (3)

11/16 in (1)

11/32 in (3)

11/64 in (3)

12.00 mm (3)

12.50 mm (3)

13.00 mm (3)

13.50 mm (2)

13/32 in (3)

13/64 in (3)

14.00 mm (3)

14.50 mm (2)

15.00 mm (3)

15.50 mm (2)

15/32 in (3)

15/64 in (3)

16.00 mm (3)

16.50 mm (2)

17.00 mm (3)

17.50 mm (2)

17/32 in (1)

17/64 in (3)

19/32 in (1)

19/64 in (3)

2.00 mm (3)

2.05 mm (1)

2.10 mm (2)

2.15 mm (1)

2.20 mm (2)

2.25 mm (1)

2.30 mm (2)

2.35 mm (1)

2.40 mm (3)

2.45 mm (1)

2.50 mm (3)

2.60 mm (2)

2.70 mm (2)

2.80 mm (2)

2.90 mm (2)

21/32 in (1)

21/64 in (3)

23/64 in (3)

25/64 in (3)

27/64 in (3)

29/64 in (3)

3.00 mm (3)

3.10 mm (2)

3.20 mm (3)

3.30 mm (3)

3.40 mm (2)

3.50 mm (3)

3.60 mm (3)

3.70 mm (2)

3.80 mm (2)

3.90 mm (2)

3/16 in (3)

3/32 in (3)

3/64 in (3)

3/8 in (3)

31/64 in (3)

33/64 in (1)

35/64 in (1)

37/64 in (1)

39/64 in (1)

4.00 mm (3)

4.10 mm (3)

4.20 mm (3)

4.30 mm (3)

4.40 mm (2)

4.50 mm (3)

4.60 mm (2)

4.90 mm (3)

41/64 in (1)

43/64 in (1)

5.00 mm (3)

5.10 mm (3)

5.20 mm (3)

5.40 mm (2)

5.50 mm (3)

5.60 mm (2)

5.70 mm (2)

5.90 mm (2)

5/16 in (3)

5/32 in (3)

5/64 in (3)

5/8 in (1)

6.00 mm (3)

6.10 mm (2)

6.20 mm (2)

6.30 mm (2)

6.40 mm (2)

6.50 mm (3)

6.60 mm (2)

6.70 mm (2)

6.80 mm (3)

6.90 mm (2)

7.00 mm (3)

7.10 mm (2)

7.20 mm (2)

7.30 mm (2)

7.40 mm (2)

7.50 mm (3)

7.70 mm (2)

7.80 mm (2)

7.90 mm (2)

7/16 in (3)

7/32 in (3)

7/64 in (3)

8.00 mm (3)

8.10 mm (2)

8.20 mm (2)

8.40 mm (2)

8.50 mm (3)

8.70 mm (2)

8.80 mm (2)

9.00 mm (3)

9.20 mm (2)

9.30 mm (2)

9.40 mm (2)

9.50 mm (3)

9.60 mm (2)

9.70 mm (2)

9.80 mm (2)

9/16 in (1)

9/32 in (3)

9/64 in (3)

A (3)

B (3)

C (3)

D (3)

F (3)

G (3)

H (3)

I (3)

J (3)

K (3)

L (3)

M (3)

N (3)

O (3)

P (3)

Q (3)

S (3)

T (3)

U (3)

V (3)

W (3)

Y (3)

Z (3)
View more View less

Decimal Equivalent

0.0394 0.0394 (3)
0.04 0.04 (2)
0.041 0.041 (2)
0.0413 0.0413 (1)
0.042 0.042 (2)
0.043 0.043 (2)
0.0433 (2)

0.0453 (1)

0.0465 (2)

0.0469 (3)

0.0472 (2)

0.0492 (1)

0.0512 (2)

0.052 (2)

0.0531 (1)

0.055 (2)

0.0551 (2)

0.0571 (1)

0.0591 (3)

0.0595 (2)

0.061 (1)

0.0625 (3)

0.063 (3)

0.0635 (3)

0.065 (1)

0.0669 (2)

0.067 (3)

0.0689 (1)

0.07 (3)

0.0709 (2)

0.0728 (1)

0.073 (3)

0.0748 (2)

0.076 (3)

0.0768 (1)

0.0781 (3)

0.0785 (3)

0.0787 (3)

0.0807 (1)

0.081 (3)

0.082 (3)

0.0827 (2)

0.0846 (1)

0.086 (3)

0.0866 (2)

0.0886 (1)

0.089 (3)

0.0906 (2)

0.0925 (1)

0.0935 (3)

0.0938 (3)

0.0945 (3)

0.096 (3)

0.0965 (1)

0.098 (3)

0.0984 (3)

0.0995 (3)

0.1015 (3)

0.1024 (2)

0.104 (3)

0.1063 (2)

0.1065 (3)

0.1094 (3)

0.11 (3)

0.1102 (2)

0.111 (3)

0.113 (3)

0.1142 (2)

0.116 (3)

0.1181 (3)

0.12 (3)

0.122 (2)

0.125 (3)

0.126 (3)

0.1285 (3)

0.1299 (3)

0.1339 (2)

0.136 (3)

0.1378 (3)

0.1405 (3)

0.1406 (3)

0.1417 (3)

0.144 (3)

0.1457 (2)

0.147 (3)

0.1495 (3)

0.1496 (2)

0.152 (3)

0.1535 (2)

0.154 (3)

0.1563 (3)

0.157 (3)

0.1575 (3)

0.159 (3)

0.161 (3)

0.1614 (3)

0.1654 (3)

0.166 (3)

0.1693 (3)

0.1695 (3)

0.1719 (3)

0.173 (3)

0.1732 (2)

0.177 (3)

0.1772 (3)

0.18 (3)

0.1811 (2)

0.182 (3)

0.185 (5)

0.1875 (3)

0.189 (6)

0.191 (3)

0.1929 (3)

0.1935 (3)

0.196 (3)

0.1969 (3)

0.199 (3)

0.2008 (3)

0.201 (3)

0.2031 (3)

0.204 (3)

0.2047 (3)

0.2055 (3)

0.209 (3)

0.2126 (2)

0.213 (3)

0.2165 (3)

0.2188 (3)

0.2205 (2)

0.221 (3)

0.2244 (2)

0.228 (3)

0.2323 (2)

0.234 (3)

0.2344 (3)

0.2362 (3)

0.238 (3)

0.2402 (2)

0.242 (3)

0.2441 (2)

0.246 (3)

0.248 (2)

0.25 (3)

0.252 (2)

0.2559 (3)

0.257 (3)

0.2598 (2)

0.261 (3)

0.2638 (2)

0.2656 (3)

0.266 (3)

0.2677 (3)

0.2717 (2)

0.272 (3)

0.2756 (3)

0.277 (3)

0.2795 (2)

0.281 (3)

0.2813 (3)

0.2835 (2)

0.2874 (2)

0.29 (3)

0.2913 (2)

0.295 (3)

0.2953 (3)

0.2969 (3)

0.302 (3)

0.3031 (2)

0.3071 (2)

0.311 (2)

0.3125 (3)

0.315 (3)

0.316 (3)

0.3189 (2)

0.3228 (2)

0.323 (3)

0.3281 (3)

0.3307 (2)

0.332 (3)

0.3346 (3)

0.339 (3)

0.3425 (2)

0.3438 (3)

0.3465 (2)

0.348 (3)

0.3543 (3)

0.358 (3)

0.3594 (3)

0.3622 (2)

0.3661 (2)

0.368 (3)

0.3701 (2)

0.374 (3)

0.375 (3)

0.377 (3)

0.378 (2)

0.3819 (2)

0.3858 (2)

0.386 (3)

0.3906 (3)

0.3937 (3)

0.397 (3)

0.4016 (3)

0.404 (3)

0.4063 (3)

0.413 (3)

0.4134 (3)

0.4219 (3)

0.4252 (2)

0.4331 (3)

0.4375 (3)

0.4528 (3)

0.4531 (3)

0.4688 (3)

0.4724 (3)

0.4844 (3)

0.4921 (3)

0.5 (3)

0.5118 (3)

0.5156 (1)

0.5313 (1)

0.5315 (2)

0.5469 (1)

0.5512 (3)

0.5625 (1)

0.5709 (2)

0.5781 (1)

0.5906 (3)

0.5938 (1)

0.6094 (1)

0.6102 (2)

0.625 (1)

0.6299 (3)

0.6406 (1)

0.6496 (2)

0.6563 (1)

0.6693 (3)

0.6719 (1)

0.6875 (1)

0.689 (2)
View more View less

Finish - Machining

Black Oxide Black Oxide (242)
Bright (Uncoated) Bright (Uncoated) (215)
TiCN TiCN (150)

Flute Length

1 1/2 in 1 1/2 in (12)
1 1/4 in 1 1/4 in (9)
1 1/8 in 1 1/8 in (9)
1 3/4 in 1 3/4 in (9)
1 3/8 in 1 3/8 in (9)
1 5/8 in 1 5/8 in (12)
1 7/16 in (9)

1 7/8 in (9)

1 in (18)

101.00 mm (9)

108.00 mm (5)

11/16 in (6)

114.00 mm (5)

12.00 mm (4)

120.00 mm (5)

125.00 mm (5)

130.00 mm (2)

14.00 mm (3)

16.00 mm (5)

18.00 mm (7)

2 1/2 in (15)

2 1/8 in (15)

2 15/16 in (9)

2 3/16 in (12)

2 3/4 in (12)

2 5/16 in (12)

2 5/8 in (12)

2 7/16 in (15)

2 7/8 in (18)

2 in (12)

20.00 mm (7)

22.00 mm (6)

24.00 mm (7)

27.00 mm (7)

3 1/16 in (9)

3 1/2 in (9)

3 15/16 in (3)

3 3/16 in (6)

3 3/4 in (9)

3 5/16 in (6)

3 5/8 in (9)

3 7/16 in (9)

3 7/8 in (9)

3/4 in (7)

30.00 mm (9)

33.00 mm (9)

36.00 mm (8)

39.00 mm (10)

4 1/16 in (3)

4 1/2 in (3)

4 13/16 in (5)

4 3/16 in (3)

4 3/8 in (3)

4 5/16 in (3)

43.00 mm (13)

47.00 mm (12)

5 3/16 in (5)

5 5/8 in (2)

52.00 mm (15)

57.00 mm (14)

63.00 mm (15)

69.00 mm (19)

7/8 in (12)

75.00 mm (18)

81.00 mm (16)

87.00 mm (15)

94.00 mm (8)
View more View less

Shank Dia.

1 1/2 in 1 1/2 in (3)
1 1/4 in 1 1/4 in (1)
1 11/16 in 1 11/16 in (2)
1 11/32 in 1 11/32 in (1)
1 15/16 in 1 15/16 in (1)
1 19/32 in 1 19/32 in (3)
1 19/64 in (2)

1 25/64 in (2)

1 27/32 in (1)

1 3/16 in (2)

1 3/32 in (2)

1 3/4 in (1)

1 3/64 in (1)

1 35/64 in (1)

1 41/64 in (1)

1 51/64 in (2)

1 57/64 in (2)

1 7/16 in (1)

1 9/64 in (1)

1 mm (3)

1/16 in (21)

1/2 in (4)

1/32 in (10)

1/4 in (12)

1/8 in (15)

10 mm (3)

10.2 mm (3)

10.5 mm (3)

10.8 mm (2)

11 mm (3)

11.5 mm (3)

11/16 in (1)

11/32 in (9)

11/64 in (18)

12 mm (3)

12.5 mm (3)

13 mm (3)

13.5 mm (2)

13/32 in (3)

13/64 in (12)

14 mm (3)

14.5 mm (2)

15 mm (3)

15.5 mm (2)

15/32 in (3)

15/64 in (12)

16 mm (3)

16.5 mm (2)

17 mm (3)

17.5 mm (2)

17/64 in (15)

19/32 in (1)

19/64 in (6)

2 mm (4)

2.1 mm (3)

2.2 mm (3)

2.3 mm (3)

2.4 mm (4)

2.5 mm (3)

2.6 mm (2)

2.7 mm (2)

2.8 mm (2)

2.9 mm (2)

21/64 in (6)

23/64 in (6)

25/64 in (9)

27/64 in (3)

3 mm (3)

3.1 mm (2)

3.2 mm (3)

3.3 mm (3)

3.4 mm (2)

3.5 mm (3)

3.6 mm (3)

3.7 mm (2)

3.8 mm (2)

3.9 mm (2)

3/16 in (24)

3/32 in (21)

3/64 in (9)

3/8 in (12)

31/64 in (3)

33/64 in (1)

35/64 in (1)

39/64 in (1)

4 mm (3)

4.1 mm (3)

4.2 mm (3)

4.3 mm (3)

4.4 mm (2)

4.5 mm (3)

4.6 mm (2)

4.7 mm (2)

4.8 mm (3)

4.9 mm (3)

41/64 in (1)

43/64 in (1)

5 mm (3)

5.1 mm (3)

5.2 mm (3)

5.4 mm (2)

5.5 mm (3)

5.6 mm (2)

5.7 mm (2)

5.9 mm (2)

5/16 in (12)

5/32 in (15)

5/64 in (18)

5/8 in (2)

6 mm (3)

6.1 mm (2)

6.2 mm (2)

6.3 mm (2)

6.4 mm (2)

6.5 mm (3)

6.6 mm (2)

6.7 mm (2)

6.8 mm (3)

6.9 mm (2)

7 mm (3)

7.1 mm (2)

7.2 mm (2)

7.3 mm (2)

7.4 mm (2)

7.5 mm (3)

7.7 mm (2)

7.8 mm (2)

7.9 mm (2)

7/16 in (6)

7/32 in (12)

7/64 in (18)

8 mm (3)

8.1 mm (2)

8.2 mm (2)

8.4 mm (2)

8.5 mm (3)

8.7 mm (2)

8.8 mm (2)

9 mm (3)

9.2 mm (2)

9.3 mm (2)

9.4 mm (2)

9.5 mm (3)

9.6 mm (2)

9.7 mm (2)

9.8 mm (2)

9/16 in (2)

9/32 in (6)

9/64 in (18)
View more View less

Overall Length

1 3/4 in 1 3/4 in (7)
1 5/8 in 1 5/8 in (6)
1 7/8 in 1 7/8 in (12)
101.00 mm 101.00 mm (15)
109.00 mm 109.00 mm (19)
117.00 mm 117.00 mm (18)
125.00 mm (16)

133.00 mm (15)

142.00 mm (8)

151.00 mm (9)

160.00 mm (5)

169.00 mm (5)

178.00 mm (5)

184.00 mm (5)

191.00 mm (2)

2 1/2 in (9)

2 1/4 in (9)

2 1/8 in (9)

2 3/4 in (12)

2 3/8 in (9)

2 5/8 in (12)

2 7/8 in (9)

2 in (18)

3 1/2 in (12)

3 1/4 in (15)

3 1/8 in (12)

3 3/4 in (15)

3 3/8 in (12)

3 5/8 in (15)

3 7/8 in (12)

3 in (9)

34.00 mm (4)

36.00 mm (3)

38.00 mm (5)

4 1/2 in (6)

4 1/4 in (9)

4 1/8 in (18)

4 3/4 in (9)

4 3/8 in (9)

4 5/8 in (6)

4 7/8 in (9)

4 in (12)

40.00 mm (7)

43.00 mm (7)

46.00 mm (6)

49.00 mm (7)

5 1/2 in (3)

5 1/4 in (9)

5 1/8 in (9)

5 3/4 in (3)

5 3/8 in (3)

5 5/8 in (3)

5 7/8 in (3)

5 in (9)

53.00 mm (7)

57.00 mm (9)

6 5/8 in (5)

6 in (3)

61.00 mm (9)

65.00 mm (8)

7 1/8 in (5)

7 5/8 in (2)

70.00 mm (10)

75.00 mm (13)

80.00 mm (12)

86.00 mm (15)

93.00 mm (14)
View more View less

Primary Material Application

Aluminum, Brass, Bronze, Cast Iron, Copper, Stainless Steel, Steel Aluminum, Brass, Bronze, Cast Iron, Copper, Stainless Steel, Steel (17)
Aluminum, Brass, Bronze, Copper Aluminum, Brass, Bronze, Copper (28)
Aluminum, Brass, Bronze, Copper, Stainless Steel, Steel Aluminum, Brass, Bronze, Copper, Stainless Steel, Steel (320)
Cast Iron, Stainless Steel, Steel Cast Iron, Stainless Steel, Steel (242)

Series

2001G 2001G (242)
2002G 2002G (215)
2002G-TC 2002G-TC (150)

Standards

ASME B94.11M ASME B94.11M (145)
ASME B94.11M, ANSI ASME B94.11M, ANSI (31)
ASME B94.11M, ANSI, DIN 338 ASME B94.11M, ANSI, DIN 338 (11)
ASME B94.11M-1993 ASME B94.11M-1993 (198)
DIN 338 DIN 338 (222)

Vanadium High-Speed Steel Jobber-Length Drill Bits

Vanadium high-speed steel jobber-length drill bits are made from high-speed steel, carbon, vanadium carbide, and other alloys. They provide more abrasion resistance and wear resistance than standard high-speed steel drill bits. Jobber-length drill bits are the most commonly used drill-bit length. They provide a good balance of strength and accuracy when drilling into a range of materials.

https://catalogue.grainger.ca/?hybris=true

607 Results Found

In stock at branch(0)

Branch #

Change

Find a Branch

Sort results by:

Grid List

Results per page : 16 | 32 | 48

JOBBER LENGTH DRILL BIT, #10 DRILL BIT SIZE, 2 7/16 IN FLUTE L, 3⅝ IN L, BRIGHT FINISH

CLEVELAND
JOBBER LENGTH DRILL BIT, #10 DRILL BIT SIZE, 2 7/16 IN FLUTE L, 3⅝ IN L, BRIGHT FINISH
Item # GNF2002G72110
Mfr. Model # 2002G72110

EHC: EHC :

This general purpose jobber length drill bit is made of vanadium high speed steel and has a 3/16 inch diameter, 1 3/16 inch long shank. It is for use with aluminum, brass, bronze, copper, steel, and meets ASME standards. This 2002G series jobber length drill bit has a bright (uncoated) finish, and has wire measurements. It is non-coolant through with a 3⅝ inch length. Plus it has two 2 7/16 inch spiral flutes, a straight shank, and 118 Degrees conventional point.

This general purpose jobber length drill bit is made of vanadium high speed steel and has a 3/16 inch diameter, 1 3/16 inch long shank. It is for use with aluminum, brass, bronze, copper, steel, and meets ASME standards. This 2002G series jobber length drill bit has a bright (uncoated) finish, and has wire measurements. It is non-coolant through with a 3⅝ inch length. Plus it has two 2 7/16 inch spiral flutes, a straight shank, and 118 Degrees conventional point.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # N/A

This product must be purchased in multiples of 12 . Please update the quantity to proceed with checkout.

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price : $5.78 / EACH

EHC: EHC :

Qty:

Compare

JOBBER LENGTH DRILL BIT, #40 DRILL BIT SIZE, 1⅜ IN FLUTE L, 2⅜ IN L

CLEVELAND
JOBBER LENGTH DRILL BIT, #40 DRILL BIT SIZE, 1⅜ IN FLUTE L, 2⅜ IN L
Item # GNF2001G71140
Mfr. Model # 2001G71140

EHC: EHC :

This general purpose jobber length drill bit is made of vanadium high speed steel and has a 3/32 inch diameter, one-inch long shank. It is for use with cast iron, steel, and meets ASME standards. This 2001G series jobber length drill bit has a black oxide finish, and has wire measurements. It is non-coolant through with a 2⅜ inch length. Plus it has two 1⅜ inch spiral flutes, a straight shank, and 118 Degrees conventional point.

This general purpose jobber length drill bit is made of vanadium high speed steel and has a 3/32 inch diameter, one-inch long shank. It is for use with cast iron, steel, and meets ASME standards. This 2001G series jobber length drill bit has a black oxide finish, and has wire measurements. It is non-coolant through with a 2⅜ inch length. Plus it has two 1⅜ inch spiral flutes, a straight shank, and 118 Degrees conventional point.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # N/A

This product must be purchased in multiples of 12 . Please update the quantity to proceed with checkout.

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price : $4.01 / EACH

EHC: EHC :

Qty:

Compare

JOBBER LENGTH DRILL BIT, 17/64 IN DRILL BIT SIZE, 2⅞ IN FLUTE L, 4⅛ IN L

CLEVELAND
JOBBER LENGTH DRILL BIT, 17/64 IN DRILL BIT SIZE, 2⅞ IN FLUTE L, 4⅛ IN L
Item # GNF2001G71017
Mfr. Model # 2001G71017

EHC: EHC :

This general purpose jobber length drill bit is made of vanadium high speed steel and has a ¼ inch diameter, 1¼ inch long shank. It is for use with cast iron, steel, and meets ASME standards. This 2001G series jobber length drill bit has a black oxide finish, and has fractional inch measurements. It is non-coolant through with a 4⅛ inch length. Plus it has two 2⅞ inch spiral flutes, a straight shank, and 118 Degrees conventional point.

This general purpose jobber length drill bit is made of vanadium high speed steel and has a ¼ inch diameter, 1¼ inch long shank. It is for use with cast iron, steel, and meets ASME standards. This 2001G series jobber length drill bit has a black oxide finish, and has fractional inch measurements. It is non-coolant through with a 4⅛ inch length. Plus it has two 2⅞ inch spiral flutes, a straight shank, and 118 Degrees conventional point.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # N/A

This product must be purchased in multiples of 12 . Please update the quantity to proceed with checkout.

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price : $7.42 / EACH

EHC: EHC :

Qty:

Compare

JOBBER LENGTH DRILL BIT, #39 DRILL BIT SIZE, 1⅜ IN FLUTE L, 2⅜ IN L, BRIGHT FINISH

CLEVELAND
JOBBER LENGTH DRILL BIT, #39 DRILL BIT SIZE, 1⅜ IN FLUTE L, 2⅜ IN L, BRIGHT FINISH
Item # GNF2002G72139
Mfr. Model # 2002G72139

EHC: EHC :

This general purpose jobber length drill bit is made of vanadium high speed steel and has a 3/32 inch diameter, one-inch long shank. It is for use with aluminum, brass, bronze, copper, steel, and meets ASME standards. This 2002G series jobber length drill bit has a bright (uncoated) finish, and has wire measurements. It is non-coolant through with a 2⅜ inch length. Plus it has two 1⅜ inch spiral flutes, a straight shank, and 118 Degrees conventional point.

This general purpose jobber length drill bit is made of vanadium high speed steel and has a 3/32 inch diameter, one-inch long shank. It is for use with aluminum, brass, bronze, copper, steel, and meets ASME standards. This 2002G series jobber length drill bit has a bright (uncoated) finish, and has wire measurements. It is non-coolant through with a 2⅜ inch length. Plus it has two 1⅜ inch spiral flutes, a straight shank, and 118 Degrees conventional point.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # N/A

This product must be purchased in multiples of 12 . Please update the quantity to proceed with checkout.

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price : $4.03 / EACH

EHC: EHC :

Qty:

Compare

JOBBER LENGTH DRILL BIT, #2 DRILL BIT SIZE, 2⅝ IN FLUTE L, 3⅞ IN L, COBALT, RIGHT HAND

CLEVELAND
JOBBER LENGTH DRILL BIT, #2 DRILL BIT SIZE, 2⅝ IN FLUTE L, 3⅞ IN L, COBALT, RIGHT HAND
Item # GNF2002GC72102
Mfr. Model # 2002G-C72102

EHC: EHC :

This general purpose jobber length drill bit is made of vanadium high speed steel and has a 7/32 inch diameter, 1¼ inch long shank. It is for use with aluminum, brass, bronze, copper, steel, and meets ASME standards. This 2002G series jobber length drill bit has a bright (uncoated) finish, and has wire measurements. It is non-coolant through with a 3⅞ inch length. Plus it has two 2⅝ inch spiral flutes, a straight shank, and 118 Degrees conventional point.

This general purpose jobber length drill bit is made of vanadium high speed steel and has a 7/32 inch diameter, 1¼ inch long shank. It is for use with aluminum, brass, bronze, copper, steel, and meets ASME standards. This 2002G series jobber length drill bit has a bright (uncoated) finish, and has wire measurements. It is non-coolant through with a 3⅞ inch length. Plus it has two 2⅝ inch spiral flutes, a straight shank, and 118 Degrees conventional point.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # N/A

This product must be purchased in multiples of 12 . Please update the quantity to proceed with checkout.

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price : $7.82 / EACH

EHC: EHC :

Qty:

Compare

JOBBER LENGTH DRILL BIT, #21 DRILL BIT SIZE, 2⅛ IN FLUTE L, 3¼ IN L, BRIGHT FINISH

CLEVELAND
JOBBER LENGTH DRILL BIT, #21 DRILL BIT SIZE, 2⅛ IN FLUTE L, 3¼ IN L, BRIGHT FINISH
Item # GNF2002G72121
Mfr. Model # 2002G72121

EHC: EHC :

This general purpose jobber length drill bit is made of vanadium high speed steel and has a 5/32 inch diameter, 1⅛ inch long shank. It is for use with aluminum, brass, bronze, copper, steel, and meets ASME standards. This 2002G series jobber length drill bit has a bright (uncoated) finish, and has wire measurements. It is non-coolant through with a 3¼ inch length. Plus it has two 2⅛ inch spiral flutes, a straight shank, and 118 Degrees conventional point.

This general purpose jobber length drill bit is made of vanadium high speed steel and has a 5/32 inch diameter, 1⅛ inch long shank. It is for use with aluminum, brass, bronze, copper, steel, and meets ASME standards. This 2002G series jobber length drill bit has a bright (uncoated) finish, and has wire measurements. It is non-coolant through with a 3¼ inch length. Plus it has two 2⅛ inch spiral flutes, a straight shank, and 118 Degrees conventional point.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # N/A

This product must be purchased in multiples of 12 . Please update the quantity to proceed with checkout.

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price : $4.77 / EACH

EHC: EHC :

Qty:

Compare

JOBBER LENGTH DRILL BIT, 1/16 IN DRILL BIT SIZE, ⅞ IN FLUTE L, 1⅞ IN L

CLEVELAND
JOBBER LENGTH DRILL BIT, 1/16 IN DRILL BIT SIZE, ⅞ IN FLUTE L, 1⅞ IN L
Item # GNF2001G71004
Mfr. Model # 2001G71004

EHC: EHC :

This general purpose jobber length drill bit is made of vanadium high speed steel and has a 1/16 inch diameter, one-inch long shank. It is for use with cast iron, steel, and meets ASME standards. This 2001G series jobber length drill bit has a black oxide finish, and has fractional inch measurements. It is non-coolant through with a 1⅞ inch length. Plus it has two ⅞ inch spiral flutes, a straight shank, and 118 Degrees conventional point.

This general purpose jobber length drill bit is made of vanadium high speed steel and has a 1/16 inch diameter, one-inch long shank. It is for use with cast iron, steel, and meets ASME standards. This 2001G series jobber length drill bit has a black oxide finish, and has fractional inch measurements. It is non-coolant through with a 1⅞ inch length. Plus it has two ⅞ inch spiral flutes, a straight shank, and 118 Degrees conventional point.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # N/A

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price : $3.90 / EACH

EHC: EHC :

Qty:

Compare

JOBBER LENGTH DRILL BIT, ¼ IN DRILL BIT SIZE, 2¾ IN FLUTE L, 4 IN L

CLEVELAND
JOBBER LENGTH DRILL BIT, ¼ IN DRILL BIT SIZE, 2¾ IN FLUTE L, 4 IN L
Item # GNF2001G71016
Mfr. Model # 2001G71016

EHC: EHC :

This general purpose jobber length drill bit is made of vanadium high speed steel and has a ¼ inch diameter, 1¼ inch long shank. It is for use with cast iron, steel, and meets ASME standards. This 2001G series jobber length drill bit has a black oxide finish, and has fractional inch measurements. It is non-coolant through with a four-inch length. Plus it has two 2¾ inch spiral flutes, a straight shank, and 118 Degrees conventional point.

This general purpose jobber length drill bit is made of vanadium high speed steel and has a ¼ inch diameter, 1¼ inch long shank. It is for use with cast iron, steel, and meets ASME standards. This 2001G series jobber length drill bit has a black oxide finish, and has fractional inch measurements. It is non-coolant through with a four-inch length. Plus it has two 2¾ inch spiral flutes, a straight shank, and 118 Degrees conventional point.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # N/A

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price : $7.15 / EACH

EHC: EHC :

Qty:

Compare

JOBBER LENGTH DRILL BIT, ⅛ IN DRILL BIT SIZE, 1⅝ IN FLUTE L, 2¾ IN L

CLEVELAND
JOBBER LENGTH DRILL BIT, ⅛ IN DRILL BIT SIZE, 1⅝ IN FLUTE L, 2¾ IN L
Item # GNF2002GTC73008
Mfr. Model # 2002GTC73008

EHC: EHC :

This general purpose jobber length drill bit is made of vanadium high speed steel and has a ⅛ inch diameter, 1⅛ inch long shank. It is for use with aluminum, brass, bronze, copper, steel, and meets ASME standards. This 2002G-TC series jobber length drill bit has a TiCN finish, and has fractional inch measurements. It is non-coolant through with a 2¾ inch length. Plus it has two 1⅝ inch spiral flutes, a straight shank, and 118 Degrees conventional point.

This general purpose jobber length drill bit is made of vanadium high speed steel and has a ⅛ inch diameter, 1⅛ inch long shank. It is for use with aluminum, brass, bronze, copper, steel, and meets ASME standards. This 2002G-TC series jobber length drill bit has a TiCN finish, and has fractional inch measurements. It is non-coolant through with a 2¾ inch length. Plus it has two 1⅝ inch spiral flutes, a straight shank, and 118 Degrees conventional point.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # N/A

This product must be purchased in multiples of 12 . Please update the quantity to proceed with checkout.

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price : $7.75 / EACH

EHC: EHC :

Qty:

Compare

JOBBER LENGTH DRILL BIT, #60 DRILL BIT SIZE, 11/16 IN FLUTE L, 1⅝ IN L, BRIGHT FINISH

CLEVELAND
JOBBER LENGTH DRILL BIT, #60 DRILL BIT SIZE, 11/16 IN FLUTE L, 1⅝ IN L, BRIGHT FINISH
Item # GNF2002G72160
Mfr. Model # 2002G72160

EHC: EHC :

This general purpose jobber length drill bit is made of vanadium high speed steel and has a 1/32 inch diameter, 15/16 inch long shank. It is for use with aluminum, brass, bronze, copper, steel, and meets ASME standards. This 2002G series jobber length drill bit has a bright (uncoated) finish, and has wire measurements. It is non-coolant through with a 1⅝ inch length. Plus it has two 11/16 inch spiral flutes, a straight shank, and 118 Degrees conventional point.

This general purpose jobber length drill bit is made of vanadium high speed steel and has a 1/32 inch diameter, 15/16 inch long shank. It is for use with aluminum, brass, bronze, copper, steel, and meets ASME standards. This 2002G series jobber length drill bit has a bright (uncoated) finish, and has wire measurements. It is non-coolant through with a 1⅝ inch length. Plus it has two 11/16 inch spiral flutes, a straight shank, and 118 Degrees conventional point.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # N/A

This product must be purchased in multiples of 12 . Please update the quantity to proceed with checkout.

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price : $3.44 / EACH

EHC: EHC :

Qty:

Compare

JOBBER LENGTH DRILL BIT, #41 DRILL BIT SIZE, 1⅜ IN FLUTE L, 2⅜ IN L

CLEVELAND
JOBBER LENGTH DRILL BIT, #41 DRILL BIT SIZE, 1⅜ IN FLUTE L, 2⅜ IN L
Item # GNF2001G71141
Mfr. Model # 2001G71141

EHC: EHC :

This general purpose jobber length drill bit is made of vanadium high speed steel and has a 3/32 inch diameter, one-inch long shank. It is for use with cast iron, steel, and meets ASME standards. This 2001G series jobber length drill bit has a black oxide finish, and has wire measurements. It is non-coolant through with a 2⅜ inch length. Plus it has two 1⅜ inch spiral flutes, a straight shank, and 118 Degrees conventional point.

This general purpose jobber length drill bit is made of vanadium high speed steel and has a 3/32 inch diameter, one-inch long shank. It is for use with cast iron, steel, and meets ASME standards. This 2001G series jobber length drill bit has a black oxide finish, and has wire measurements. It is non-coolant through with a 2⅜ inch length. Plus it has two 1⅜ inch spiral flutes, a straight shank, and 118 Degrees conventional point.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # N/A

This product must be purchased in multiples of 12 . Please update the quantity to proceed with checkout.

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price : $4.01 / EACH

EHC: EHC :

Qty:

Compare

JOBBER LENGTH DRILL BIT, #36 DRILL BIT SIZE, 1 7/16 IN FLUTE L, 2½ IN L

CLEVELAND
JOBBER LENGTH DRILL BIT, #36 DRILL BIT SIZE, 1 7/16 IN FLUTE L, 2½ IN L
Item # GNF2001G71136
Mfr. Model # 2001G71136

EHC: EHC :

This general purpose jobber length drill bit is made of vanadium high speed steel and has a 3/32 inch diameter, 1 1/16 inch long shank. It is for use with cast iron, steel, and meets ASME standards. This 2001G series jobber length drill bit has a black oxide finish, and has wire measurements. It is non-coolant through with a 2½ inch length. Plus it has two 1 7/16 inch spiral flutes, a straight shank, and 118 Degrees conventional point.

This general purpose jobber length drill bit is made of vanadium high speed steel and has a 3/32 inch diameter, 1 1/16 inch long shank. It is for use with cast iron, steel, and meets ASME standards. This 2001G series jobber length drill bit has a black oxide finish, and has wire measurements. It is non-coolant through with a 2½ inch length. Plus it has two 1 7/16 inch spiral flutes, a straight shank, and 118 Degrees conventional point.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # N/A

This product must be purchased in multiples of 12 . Please update the quantity to proceed with checkout.

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price : $4.01 / EACH

EHC: EHC :

Qty:

Compare

JOBBER LENGTH DRILL BIT, 17/64 IN DRILL BIT SIZE, 2⅞ IN FLUTE L, 4⅛ IN L, BRIGHT

CLEVELAND
JOBBER LENGTH DRILL BIT, 17/64 IN DRILL BIT SIZE, 2⅞ IN FLUTE L, 4⅛ IN L, BRIGHT
Item # GNF2002G72017
Mfr. Model # 2002G72017

EHC: EHC :

High vanadium HSS-E class alloy material. 118 degree point. Improved substrate and geometry provide increased wear-life over standard HSS drills. Size 17/64.

High vanadium HSS-E class alloy material. 118 degree point. Improved substrate and geometry provide increased wear-life over standard HSS drills. Size 17/64.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # 1283

This product must be purchased in multiples of 12 . Please update the quantity to proceed with checkout.

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price : $8.83 / EACH

EHC: EHC :

Qty:

Compare

JOBBER LENGTH DRILL BIT, #35 DRILL BIT SIZE, 1½ IN FLUTE L, 2⅝ IN L

CLEVELAND
JOBBER LENGTH DRILL BIT, #35 DRILL BIT SIZE, 1½ IN FLUTE L, 2⅝ IN L
Item # GNF2001G71135
Mfr. Model # 2001G71135

EHC: EHC :

This general purpose jobber length drill bit is made of vanadium high speed steel and has a 7/64 inch diameter, 1⅛ inch long shank. It is for use with cast iron, steel, and meets ASME standards. This 2001G series jobber length drill bit has a black oxide finish, and has wire measurements. It is non-coolant through with a 2⅝ inch length. Plus it has two 1½ inch spiral flutes, a straight shank, and 118 Degrees conventional point.

This general purpose jobber length drill bit is made of vanadium high speed steel and has a 7/64 inch diameter, 1⅛ inch long shank. It is for use with cast iron, steel, and meets ASME standards. This 2001G series jobber length drill bit has a black oxide finish, and has wire measurements. It is non-coolant through with a 2⅝ inch length. Plus it has two 1½ inch spiral flutes, a straight shank, and 118 Degrees conventional point.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # N/A

This product must be purchased in multiples of 12 . Please update the quantity to proceed with checkout.

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price : $4.24 / EACH

EHC: EHC :

Qty:

Compare

JOBBER LENGTH DRILL BIT, ¼ IN DRILL BIT SIZE, 2¾ IN FLUTE L, 4 IN L, BRIGHT FINISH

CLEVELAND
JOBBER LENGTH DRILL BIT, ¼ IN DRILL BIT SIZE, 2¾ IN FLUTE L, 4 IN L, BRIGHT FINISH
Item # GNF2002G72016
Mfr. Model # 2002G72016

EHC: EHC :

High vanadium HSS-E class alloy material. 118 degree point. Improved substrate and geometry provide increased wear-life over standard HSS drills. Size 1/4.

High vanadium HSS-E class alloy material. 118 degree point. Improved substrate and geometry provide increased wear-life over standard HSS drills. Size 1/4.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # 1283

This product must be purchased in multiples of 12 . Please update the quantity to proceed with checkout.

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price : $7.65 / EACH

EHC: EHC :

Qty:

Compare

JOBBER LENGTH DRILL BIT, #27 DRILL BIT SIZE, 1⅞ IN FLUTE L, 3 IN L, STEAM OXIDE

CLEVELAND
JOBBER LENGTH DRILL BIT, #27 DRILL BIT SIZE, 1⅞ IN FLUTE L, 3 IN L, STEAM OXIDE
Item # GNF2001G71127
Mfr. Model # 2001G71127

EHC: EHC :

This general purpose jobber length drill bit is made of vanadium high speed steel and has a 9/64 inch diameter, 1⅛ inch long shank. It is for use with cast iron, steel, and meets ASME standards. This 2001G series jobber length drill bit has a black oxide finish, and has wire measurements. It is non-coolant through with a three-inch length. Plus it has two 1⅞ inch spiral flutes, a straight shank, and 118 Degrees conventional point.

This general purpose jobber length drill bit is made of vanadium high speed steel and has a 9/64 inch diameter, 1⅛ inch long shank. It is for use with cast iron, steel, and meets ASME standards. This 2001G series jobber length drill bit has a black oxide finish, and has wire measurements. It is non-coolant through with a three-inch length. Plus it has two 1⅞ inch spiral flutes, a straight shank, and 118 Degrees conventional point.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # N/A

This product must be purchased in multiples of 12 . Please update the quantity to proceed with checkout.

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price : $4.58 / EACH

EHC: EHC :

Qty:

Compare

Grid List

Results per page : 16 | 32 | 48

Availability

Pick Up

Shipping

To view Availability, please select a Branch

To view Availability for another location, please enter postal code below Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order.

Select a Branch

Selected Branch

(View on Map)

Apply

Enter the city, province, postal code or branch number.

Cancel

Please select pick up location

No Result Found.

Selected Branch

,
,

Phone :
Fax :
Hours :

No Result Found.

New Postal Code

Postal Code should be in LNLNLN format e.g. L3T7W8

Apply

Add to Order List

Your items were added

Your items were added to some lists

Max quantity exceeded. The item could not be added to the following List(s)

No Existing List Found. Please Create New List below.

Your list has been created

Please select a list

Add to an existing list

My List

No Existing 'My List' Found. Please Create New 'My List' first.

No Results Found

Select one or multiple lists

Create a new list

List Name

My List

You have #compareProducts out of 5 products to compare selected.

Clear All

Add Item

Hide

Show

Filter Results By

Search within these results

Vanadium High-Speed Steel Jobber-Length Drill Bits

607 Results Found

Add to Order List

Company Information

Resources

Services

Ordering

Customer Support

Item #	Qty