Welding
Arc Welding
TIG Welding
TIG Consumables
TIG Collets
Close

Filter Results By

Search within these results

Shop By

Clearance (1)

In Stock Now (19)

Brand

AMERICAN TORCH TIP AMERICAN TORCH TIP (5)
ESAB ESAB (5)
LINCOLN ELECTRIC LINCOLN ELECTRIC (10)
MAXWELD MAXWELD (17)
MILLER ELECTRIC MILLER ELECTRIC (1)
VICTOR VICTOR (1)
WELDCRAFT (17)
View more View less

Price

Under $10 Under $10 (41)
$10 - $15 $10 - $15 (8)
$15 - $20 $15 - $20 (1)
$30 - $35 $30 - $35 (1)
$40 - $50 $40 - $50 (1)
$50 - $60 $50 - $60 (1)
$60 - $70 (1)

$80 - $90 (1)

$100 - $200 (1)
View more View less

Compatible with Series

20, 24 20, 24 (2)
22 22 (2)
A16, A35 A16, A35 (1)
17, 18, 26, A-150, A-200, A-250, HW-17, HW-26, PTA-17, PTA-26, PTW-18, W-350, W-400, W-410 17, 18, 26, A-150, A-200, A-250, HW-17, HW-26, PTA-17, PTA-26, PTW-18, W-350, W-400, W-410 (8)
17, 18, 26, A-150, A-200, A-250, HW-17, HW-26, PTA-17, PTA-26, PTW-18, W-350, W-410 17, 18, 26, A-150, A-200, A-250, HW-17, HW-26, PTA-17, PTA-26, PTW-18, W-350, W-410 (7)
20, 25, 9, A-125, W-200, W-225, W-250, W-280, W-310, W-375 20, 25, 9, A-125, W-200, W-225, W-250, W-280, W-310, W-375 (8)
17, 18, 20FHD, 25 26, A-150, A-200, A-250, A35HP, HW-17, HW-26, PTA-17, PTA-26, PTW-18, W-225 Modular, W-350, W-400, W-410 (5)

20, 20H-320, 9, A-125, PTA-9, PTW-20, W-200, W-225, W-225 Modular, W-250, W-280, W-310, W-375 (5)

9, 20, 25, SW-320 (3)

17, 18, 26, SW-418 (1)

17, 18, 20 Torches (1)
View more View less

Compatible with Model

20, 20F, 20 HP, 20P, 25, 301251, 301253, 9, 9F, 9FVB, 9 HP, 9P, 9V, 9VB, CS310A, WP-20, WP-20P, WP-20V, WP-25, WP-9, WP-9F, WP-9FV, WP-9V, WP-R9F, WP-R9FV 20, 20F, 20 HP, 20P, 25, 301251, 301253, 9, 9F, 9FVB, 9 HP, 9P, 9V, 9VB, CS310A, WP-20, WP-20P, WP-20V, WP-25, WP-9, WP-9F, WP-9FV, WP-9V, WP-R9F, WP-R9FV (3)
22A, 22B 22A, 22B (2)
A16F, A16FV, A16 HP, A16 HPV, A35 HP A16F, A16FV, A16 HP, A16 HPV, A35 HP (1)
17, 17F, 17FV, 17FVB, 17 HP, 17 HPV, 17V, 18, 18-90, 18 HP, 18P, 18V, 26, 26F, 26FV, 26FVB, 26 HP, 26 HPV, 26V, 301525, 301526, CS410A, HW-17, HW-17F, HW-17R, HW-26, HW-26F, HW-26R, PTA-17, PTA-17F, PTA-17FV, PTA-17V, PTA-26, PTA-26F, PTA-26FV, PTA-26V, PTW-18, WP-17, WP-17-PSH, WP-17F, WP-17FV, WP-17V, WP-17V-PSH, WP-18, WP-18SC, WP-18V, WP-26, WP-26F, WP-26FV, WP-26V, WP-R17F, WP-R17FV, WP-R26F, WP-R26FV 17, 17F, 17FV, 17FVB, 17 HP, 17 HPV, 17V, 18, 18-90, 18 HP, 18P, 18V, 26, 26F, 26FV, 26FVB, 26 HP, 26 HPV, 26V, 301525, 301526, CS410A, HW-17, HW-17F, HW-17R, HW-26, HW-26F, HW-26R, PTA-17, PTA-17F, PTA-17FV, PTA-17V, PTA-26, PTA-26F, PTA-26FV, PTA-26V, PTW-18, WP-17, WP-17-PSH, WP-17F, WP-17FV, WP-17V, WP-17V-PSH, WP-18, WP-18SC, WP-18V, WP-26, WP-26F, WP-26FV, WP-26V, WP-R17F, WP-R17FV, WP-R26F, WP-R26FV (5)
17, 17F, 17FV, 17FVB, 17 HP, 17 HPV, 17V, 18, 18-90, 18 HP, 18P, 18V, 26, 26F, 26FV, 26FVB, 26 HP, 26 HPV, 26V, 301525, 301526, CS410A, HW-17, HW-17F, HW-17R, HW-26, HW-26F, HW-26R, PTA-17, PTA-17F, PTA-17FV, PTA-17V, PTA-26, PTA-26F, PTA-26FV, PTA-26V, PTW-18, WP-17, WP-17-PSH, WP-17F, WP-17FV, WP-17V, WP-17V-PSH, WP-18, WP-18V, WP-26, WP-26F, WP-26FV, WP-26V, WP-R17F, WP-R17FV, WP-R26F, WP-R26FV 17, 17F, 17FV, 17FVB, 17 HP, 17 HPV, 17V, 18, 18-90, 18 HP, 18P, 18V, 26, 26F, 26FV, 26FVB, 26 HP, 26 HPV, 26V, 301525, 301526, CS410A, HW-17, HW-17F, HW-17R, HW-26, HW-26F, HW-26R, PTA-17, PTA-17F, PTA-17FV, PTA-17V, PTA-26, PTA-26F, PTA-26FV, PTA-26V, PTW-18, WP-17, WP-17-PSH, WP-17F, WP-17FV, WP-17V, WP-17V-PSH, WP-18, WP-18V, WP-26, WP-26F, WP-26FV, WP-26V, WP-R17F, WP-R17FV, WP-R26F, WP-R26FV (4)
17, 17F, 17FV, 17FVB, 17HP, 17HPV, 17V, 18, 18-90, 18HP, 18P, 18V, 20FHD, 25, 26, 26F, 26FV, 26FVB, 26HP, 26HPV, 26V, A35HP, CS410A, HW-17, HW-17F, HW-17R, HW-26, HW-26F, HW-26R, PTA-17, PTA-17F, PTA-17FV, PTA-17V, PTA-26, PTA-26F, PTA-26FV, PTA-26V, PTW-18, WP-17, WP-17-PSH, WP-17F, WP-17FV, WP-17V, WP-17V-PSH, WP-18, WP-18SC, WP-18V, WP-225, WP-26, WP-26F, WP-26FV, WP-26V, WP-R17F, WP-R17FV, WP-R26F, WP-R26FV 17, 17F, 17FV, 17FVB, 17HP, 17HPV, 17V, 18, 18-90, 18HP, 18P, 18V, 20FHD, 25, 26, 26F, 26FV, 26FVB, 26HP, 26HPV, 26V, A35HP, CS410A, HW-17, HW-17F, HW-17R, HW-26, HW-26F, HW-26R, PTA-17, PTA-17F, PTA-17FV, PTA-17V, PTA-26, PTA-26F, PTA-26FV, PTA-26V, PTW-18, WP-17, WP-17-PSH, WP-17F, WP-17FV, WP-17V, WP-17V-PSH, WP-18, WP-18SC, WP-18V, WP-225, WP-26, WP-26F, WP-26FV, WP-26V, WP-R17F, WP-R17FV, WP-R26F, WP-R26FV (5)
17, 17F, 17FV, 17FVB, 17HP, 17HPV, 17V, 18, 18-90, 18HP, 18P, 18V, 26, 26F, 26FV, 26FVB, 26HP, 26HPV, 26V, 301525, 301526, CS410A, HW-17, HW-17F, HW-17R, HW-26, HW-26F, HW-26R, PTA-17, PTA-17F, PTA-17FV, PTA-17V, PTA-26, PTA-26F, PTA-26FV, PTA-26V, PTW-18, WP-17, WP-17-PSH, WP-17F, WP-17FV, WP-17V, WP-17V-PSH, WP-18, WP-18SC, WP-18V, WP-26, WP-26F, WP-26FV, WP-26V, WP-R17F, WP-R17FV, WP-R26F, WP-R26FV (5)

17, 17F, 17FV, 17FVB, 17HP, 17HPV, 17V, 18, 18-90, 18HP, 18P, 18V, 26, 26F, 26FV, 26FVB, 26HP, 26HPV, 26V, 301525, 301526, CS410A, HW-17, HW-17F, HW-17R, HW-26, HW-26F, HW-26R, PTA-17, PTA-17F, PTA-17FV, PTA-17V, PTA-26, PTA-26F, PTA-26FV, PTA-26V, PTW-18, WP-17, WP-17-PSH, WP-17F, WP-17FV, WP-17V, WP-17V-PSH, WP-18, WP-18V, WP-26, WP-26F, WP-26FV, WP-26V, WP-R17F, WP-R17FV, WP-R26F, WP-R26FV (3)

20, 20F, 20H-320-25R, 20HP, 20P, 22A, 22B, 301251, 301253, 9, 9F, 9FVB, 9HP, 9P, 9V, 9VB, CS310A, HW-20, HW-20R, HW-9, HW-9F, HW-9R, PTA-9, PTA-9F, PTW-20, WP-20, WP-20P, WP-20V, WP-225, WP-9, WP-9F, WP-9FV, WP-9V, WP-R9F, WP-R9FV (5)

20, 20F, 20HP, 20P, 25, 301251, 301253, 9, 9F, 9FVB, 9HP, 9P, 9V, 9VB, CS310A, WP-20, WP-20P, WP-20V, WP-25, WP-9, WP-9F, WP-9FV, WP-9V, WP-R9F, WP-R9FV (8)

20FHD, 20W, 24, 24FVHD, 24 HP, 24V (1)

24, 20FHD, 20W, 24FVHD, 24HP, 24V (1)
View more View less

For Maximum Electrode Diameter

0.02 in 0.02 in (3)
0.04 in 0.04 in (7)
0.0625 in 0.0625 in (12)
0.09375 in 0.09375 in (4)
3/32 in 3/32 in (4)
0.0938 in 0.0938 in (4)
0.125 in (6)

1/8 in (8)

0.156 in (1)

0.1563 in (1)

1/6 in (2)
View more View less

TIG Torch Application

Gas Lens, Large Diameter Gas Lens, Non-Gas Lens Gas Lens, Large Diameter Gas Lens, Non-Gas Lens (15)
Gas Lens, Non-Gas Lens Gas Lens, Non-Gas Lens (10)
Large Diameter Gas Lens Large Diameter Gas Lens (6)
Non-Gas Lens Non-Gas Lens (1)
Non-Gas Lens, Gas Lens Non-Gas Lens, Gas Lens (2)
Stubby Gas Lens, Stubby Non-Gas Lens Stubby Gas Lens, Stubby Non-Gas Lens (7)

Reference Number

2304-0088 2304-0088 (1)
10N21 10N21 (1)
10N22 10N22 (3)
10N22S 10N22S (1)
10N23 10N23 (3)
10N23S 10N23S (2)
10N24 (2)

10N24S (2)

10N25 (2)

10N25S (2)

13N20 (1)

13N21 (2)

13N21L (1)

13N22 (3)

13N22L (1)

13N23 (2)

13N23L (2)

13N24 (1)

13N24L (2)

22N22A (1)

22N24A (1)

24C332 (1)

45V24 (1)

53N14 (1)

54N20 (4)
View more View less

TIG Collets

Collets hold tungsten electrodes in place in TIG (tungsten inert gas) torches. They also create a point of electrical contact between the torches and the electrodes so that current can flow to the electrodes. Each collet attaches behind the collet body or gas lens on a compatible TIG torch. A complete TIG torch setup includes a nozzle, collet body or gas lens, collet, insulators, back cap, torch body, torch handle, and tungsten electrode.

https://catalogue.grainger.ca/?hybris=true

56 Results Found

In stock at branch(0)

Branch #

Change

Find a Branch

Sort results by:

Grid List

Results per page : 16 | 32 | 48

COLLET, FOR ⅛ IN MAX ELECTRODE DIAMETER, 13N24, 5 PACK

WELDCRAFT
COLLET, FOR ⅛ IN MAX ELECTRODE DIAMETER, 13N24, 5 PACK
Item # WDC13N24
Mfr. Model # 13N24

EHC: EHC :

1/8 inch standard length collet. Use with WP-9, 9P. Optimize shielding gas coverage by using an appropriate size gas lens. Gas lenses help minimize rework and allow for greater tungsten extension. Extend your tungsten no further than the inside diameter of the cup to maximize shielding gas coverage.

1/8 inch standard length collet. Use with WP-9, 9P. Optimize shielding gas coverage by using an appropriate size gas lens. Gas lenses help minimize rework and allow for greater tungsten extension. Extend your tungsten no further than the inside diameter of the cup to maximize shielding gas coverage.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # 1451

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price : $4.82 / EACH

EHC: EHC :

Qty:

Compare

MAXWELD
COLLET, COPPER, FOR LINDE BRAND, TIG, 3/32 IN
Item # LEN10N24
Mfr. Model # 10N24

EHC: EHC :

TIG torch consumable is typically used on Welding Nozzle International torches 17, 18, and 26 style.

TIG torch consumable is typically used on Welding Nozzle International torches 17, 18, and 26 style.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # 1450

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price : $1.67 / EACH

EHC: EHC :

Qty:

Compare

COLLET, FOR 3/32 IN MAX ELECTRODE DIAMETER, 10N24

WELDCRAFT
COLLET, FOR 3/32 IN MAX ELECTRODE DIAMETER, 10N24
Item # WDC10N24
Mfr. Model # 10N24

EHC: EHC :

3/32 inch collet. Use with WP-17, WP-18, WP-26. Optimize shielding gas coverage by using an appropriate size gas lens. Gas lenses help minimize rework and allow for greater tungsten extension. Extend your tungsten no further than the inside diameter of the cup to maximize shielding gas coverage.

3/32 inch collet. Use with WP-17, WP-18, WP-26. Optimize shielding gas coverage by using an appropriate size gas lens. Gas lenses help minimize rework and allow for greater tungsten extension. Extend your tungsten no further than the inside diameter of the cup to maximize shielding gas coverage.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # 1451

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price : $8.65 / EACH

EHC: EHC :

Qty:

Compare

COLLET, FOR 3/32 IN MAX ELECTRODE DIAMETER, 13N23, 5 PACK

WELDCRAFT
COLLET, FOR 3/32 IN MAX ELECTRODE DIAMETER, 13N23, 5 PACK
Item # WDC13N23
Mfr. Model # 13N23

EHC: EHC :

3/32 inch collet. Use with WP-9, 9P. Optimize shielding gas coverage by using an appropriate size gas lens. Gas lenses help minimize rework and allow for greater tungsten extension. Extend your tungsten no further than the inside diameter of the cup to maximize shielding gas coverage.

3/32 inch collet. Use with WP-9, 9P. Optimize shielding gas coverage by using an appropriate size gas lens. Gas lenses help minimize rework and allow for greater tungsten extension. Extend your tungsten no further than the inside diameter of the cup to maximize shielding gas coverage.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # 1451

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price : $4.71 / EACH

EHC: EHC :

Qty:

Compare

COLLET BODY, FOR USE WITH A-150/A-200/W-350/W-410 SERIES TORCHES, 3/32 IN DIA, COPPER

MAXWELD
COLLET BODY, FOR USE WITH A-150/A-200/W-350/W-410 SERIES TORCHES, 3/32 IN DIA, COPPER
Item # LEN10N32
Mfr. Model # 10N32

EHC: EHC :

This copper collet body has a diameter of 3/32 inches and is typically used with 17, 18, and 26 series TIG torches. It is made for use with A-150 Series, A-200 Series, W-350 Series, and W-410 torches.

This copper collet body has a diameter of 3/32 inches and is typically used with 17, 18, and 26 series TIG torches. It is made for use with A-150 Series, A-200 Series, W-350 Series, and W-410 torches.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # N/A

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price : $4.02 / EACH

EHC: EHC :

Qty:

Compare

COLLET, FOR ⅛ IN MAX ELECTRODE DIAMETER, 10N25

WELDCRAFT
COLLET, FOR ⅛ IN MAX ELECTRODE DIAMETER, 10N25
Item # WDC10N25
Mfr. Model # 10N25

EHC: EHC :

1/8 inch collet. Use with WP-17, WP-18, WP-26. Optimize shielding gas coverage by using an appropriate size gas lens. Gas lenses help minimize rework and allow for greater tungsten extension. Extend your tungsten no further than the inside diameter of the cup to maximize shielding gas coverage.

1/8 inch collet. Use with WP-17, WP-18, WP-26. Optimize shielding gas coverage by using an appropriate size gas lens. Gas lenses help minimize rework and allow for greater tungsten extension. Extend your tungsten no further than the inside diameter of the cup to maximize shielding gas coverage.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # 1451

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price : $8.47 / EACH

EHC: EHC :

Qty:

Compare

COLLET BODY, FOR USE WITH A-150/A-200/W-350/W-410 SERIES TORCHES, 1/8 IN DIA, COPPER

MAXWELD
COLLET BODY, FOR USE WITH A-150/A-200/W-350/W-410 SERIES TORCHES, 1/8 IN DIA, COPPER
Item # LEN10N28
Mfr. Model # 10N28

EHC: EHC :

This copper collet body has a diameter of 1/8 inches and is typically used with 17, 18, and 26 series TIG torches. It is made for use with A-150 Series, A-200 Series, W-350 Series, and W-410 torches.

This copper collet body has a diameter of 1/8 inches and is typically used with 17, 18, and 26 series TIG torches. It is made for use with A-150 Series, A-200 Series, W-350 Series, and W-410 torches.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # N/A

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price : $3.87 / EACH

EHC: EHC :

Qty:

Compare

GAS LENS COLLET, FOR ⅛ IN MAX ELECTRODE DIAMETER, 13N24L, 2 PACK

WELDCRAFT
GAS LENS COLLET, FOR ⅛ IN MAX ELECTRODE DIAMETER, 13N24L, 2 PACK
Item # WDC13N24L
Mfr. Model # 13N24L

EHC: EHC :

This gas lens collet is made of copper. In addition, it is designed for applications including large diameter gas lens. Plus, it is compatible with 20, 25, 9, A-125, W-200, W-225, W-250, W-280, W-310, W-375, 20, 20F, 20HP, 20P, 25, 301251, 301253, 9, 9F, 9FVB, 9HP, 9P, 9V, 9VB, CS310A, WP-20, WP-20P, WP-20V, WP-25, WP-9, WP-9F, WP-9FV, WP-9V, WP-R9F, WP-R9FV and is for use with A-150 Auto, W-200, W-250 Auto, W-250 Series, W-280, W-375. It can be used for TIG welding.

This gas lens collet is made of copper. In addition, it is designed for applications including large diameter gas lens. Plus, it is compatible with 20, 25, 9, A-125, W-200, W-225, W-250, W-280, W-310, W-375, 20, 20F, 20HP, 20P, 25, 301251, 301253, 9, 9F, 9FVB, 9HP, 9P, 9V, 9VB, CS310A, WP-20, WP-20P, WP-20V, WP-25, WP-9, WP-9F, WP-9FV, WP-9V, WP-R9F, WP-R9FV and is for use with A-150 Auto, W-200, W-250 Auto, W-250 Series, W-280, W-375. It can be used for TIG welding.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # 1451

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price : $14.09 / EACH

EHC: EHC :

Qty:

Compare

MAXWELD
COLLET, COPPER, FOR USE WITH 20, 25, SW-320, TORCH SERIES 9, FOR LENCO BRAND
Item # LEN13N23
Mfr. Model # 13N23

EHC: EHC :

This collet is made of copper. Plus, it is compatible with the LENCO brand and is for use with 20, 25, SW-320, and Torch Series 9.

This collet is made of copper. Plus, it is compatible with the LENCO brand and is for use with 20, 25, SW-320, and Torch Series 9.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # N/A

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price : $1.30 / EACH

EHC: EHC :

Qty:

Compare

COLLET, FOR 1/16 IN MAX ELECTRODE DIAMETER, 13N22, 5 PACK

WELDCRAFT
COLLET, FOR 1/16 IN MAX ELECTRODE DIAMETER, 13N22, 5 PACK
Item # WDC13N22
Mfr. Model # 13N22

EHC: EHC :

1/16 inch collet. Use with WP-9, 9P. Optimize shielding gas coverage by using an appropriate size gas lens. Gas lenses help minimize rework and allow for greater tungsten extension. Extend your tungsten no further than the inside diameter of the cup to maximize shielding gas coverage.

1/16 inch collet. Use with WP-9, 9P. Optimize shielding gas coverage by using an appropriate size gas lens. Gas lenses help minimize rework and allow for greater tungsten extension. Extend your tungsten no further than the inside diameter of the cup to maximize shielding gas coverage.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # N/A

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price : $4.76 / EACH

EHC: EHC :

Qty:

Compare

MAXWELD
COLLET,TIG
Item # LEN13N24L
Mfr. Model # 13N24L

EHC: EHC :

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # N/A

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price : $3.19 / EACH

EHC: EHC :

Qty:

Compare

MILLER ELECTRIC
COLLET
Item # ESB13N23
Mfr. Model # 13N23

EHC: EHC :

This collet is made of copper. Plus, it is for use with A-125 Series, A-150 Auto, A-80 Series, W-200, W-250 Auto, W-250 Series, W-280, W-375.

This collet is made of copper. Plus, it is for use with A-125 Series, A-150 Auto, A-80 Series, W-200, W-250 Auto, W-250 Series, W-280, W-375.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # N/A

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price : $4.93 / EACH

EHC: EHC :

Qty:

Compare

MAXWELD
STUBBY COLLET, FOR USE WITH TORCH# 18,26, FOR LINDE BRAND, TIG
Item # LEN10N25S
Mfr. Model # 10N25S

EHC: EHC :

TIG torch consumable is typically used on Welding Nozzle International torches 17, 18, and 26 style.

TIG torch consumable is typically used on Welding Nozzle International torches 17, 18, and 26 style.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # N/A

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price : $1.92 / EACH

EHC: EHC :

Qty:

Compare

MAXWELD
GAS LENS COLLET BODY,TIG
Item # LEN13N23L
Mfr. Model # 13N23L

EHC: EHC :

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # N/A

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price : $2.67 / EACH

EHC: EHC :

Qty:

Compare

MAXWELD
COLLET,TIG
Item # LEN13N22
Mfr. Model # 13N22

EHC: EHC :

This collet is made of copper. In addition, it is designed for applications including gas lens, non-gas lens. Plus, it is compatible with 9,20,25, SW-320, 20, 20F, 20 HP, 20P, 25, 301251, 301253, 9, 9F, 9FVB, 9 HP, 9P, 9V, 9VB, CS310A, WP-20, WP-20P, WP-20V, WP-25, WP-9, WP-9F, WP-9FV, WP-9V, WP-R9F, WP-R9FV and is for use with A-125 Series, A-80 Series, W-200, W-250 Series, A-150 Auto, W-250 Auto, W-280, W-375. It can be used for TIG welding.

This collet is made of copper. In addition, it is designed for applications including gas lens, non-gas lens. Plus, it is compatible with 9,20,25, SW-320, 20, 20F, 20 HP, 20P, 25, 301251, 301253, 9, 9F, 9FVB, 9 HP, 9P, 9V, 9VB, CS310A, WP-20, WP-20P, WP-20V, WP-25, WP-9, WP-9F, WP-9FV, WP-9V, WP-R9F, WP-R9FV and is for use with A-125 Series, A-80 Series, W-200, W-250 Series, A-150 Auto, W-250 Auto, W-280, W-375. It can be used for TIG welding.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # N/A

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price : $1.68 / EACH

EHC: EHC :

Qty:

Compare

MAXWELD
COLLET, FOR USE WITH 17, 18 AND 20 SERIES TORCHES, FOR LINDE BRAND, TIG
Item # LEN10N23
Mfr. Model # 10N23

EHC: EHC :

TIG torch consumable is typically used on Welding Nozzle International torches 17, 18, and 26 style.

TIG torch consumable is typically used on Welding Nozzle International torches 17, 18, and 26 style.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # N/A

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price : $1.68 / EACH

EHC: EHC :

Qty:

Compare

Grid List

Results per page : 16 | 32 | 48

Availability

Pick Up

Shipping

To view Availability, please select a Branch

To view Availability for another location, please enter postal code below Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order.

Select a Branch

Selected Branch

(View on Map)

Apply

Enter the city, province, postal code or branch number.

Cancel

Please select pick up location

No Result Found.

Selected Branch

,
,

Phone :
Fax :
Hours :

No Result Found.

New Postal Code

Postal Code should be in LNLNLN format e.g. L3T7W8

Add to Order List

Your items were added

Your items were added to some lists

Max quantity exceeded. The item could not be added to the following List(s)

No Existing List Found. Please Create New List below.

Your list has been created

Please select a list

Add to an existing list

My List

No Existing 'My List' Found. Please Create New 'My List' first.

No Results Found

Select one or multiple lists

Create a new list

List Name

My List

You have #compareProducts out of 5 products to compare selected.

Clear All

Add Item

Hide

Show

Filter Results By

Search within these results

TIG Collets

56 Results Found

Add to Order List

Company Information

Resources

Services

Ordering

Customer Support

Item #	Qty