These kits each contain three straight-flute taps. The taps all have the same thread size, thread length, and overall length, but each has a different style of chamfer. One has a taper chamfer, one has a bottoming chamfer, and one has a plug chamfer. Straight-flute taps are turned with a tap wrench to create or repair internal threads in blind holes and through holes. As the taps are rotated into a hole to create threads, the chips move into the flutes but are not evacuated.
This three-piece tap kit is made of high speed steel and has a 8.08 mm diameter shank. It includes one bottoming tap, one plug tap, one taper tap, and is designed for use with aluminum, brass, bronze, cast iron, copper, steel, and meets the standards for Table 302A. This 1004 series three-piece tap kit has a bright (uncoated) finish. It has right hand direction with a 69.09 mm length.
This three-piece tap kit is made of high speed steel and has a 8.08 mm diameter shank. It includes one bottoming tap, one plug tap, one taper tap, and is designed for use with aluminum, brass, bronze, cast iron, copper, steel, and meets the standards for Table 302A. This 1004 series three-piece tap kit has a bright (uncoated) finish. It has right hand direction with a 69.09 mm length.
This hand tap set is 2 1/8 inches long overall, with a 0.168-inch shank diameter and a #8-36 UNF thread. This bright, right hand tap set includes bottoming, plug, and taper taps and is made from high speed steel.
This hand tap set is 2 1/8 inches long overall, with a 0.168-inch shank diameter and a #8-36 UNF thread. This bright, right hand tap set includes bottoming, plug, and taper taps and is made from high speed steel.
This hand tap set is 1 7/8 inches long overall, with a 0.141-inch shank diameter and a #4-48 UNF thread. This bright, right hand tap set includes bottoming, plug, and taper taps and is made from high speed steel.
This hand tap set is 1 7/8 inches long overall, with a 0.141-inch shank diameter and a #4-48 UNF thread. This bright, right hand tap set includes bottoming, plug, and taper taps and is made from high speed steel.
This three-piece tap kit is made of high speed steel and has a 9/64 inch diameter shank. It includes one bottoming tap, one plug tap, one taper tap, and is designed for use with aluminum, brass, bronze, cast iron, copper, steel, and meets the standards for USCTI. This 1004 series three-piece tap kit has a bright (uncoated) finish. It has right hand direction with a two-inch length.
This three-piece tap kit is made of high speed steel and has a 9/64 inch diameter shank. It includes one bottoming tap, one plug tap, one taper tap, and is designed for use with aluminum, brass, bronze, cast iron, copper, steel, and meets the standards for USCTI. This 1004 series three-piece tap kit has a bright (uncoated) finish. It has right hand direction with a two-inch length.
This three-piece tap kit is made of high speed steel and has a ⅜ inch diameter shank. It includes one bottoming tap, one plug tap, one taper tap, and is designed for use with aluminum, brass, bronze, cast iron, copper, steel, and meets the standards for USCTI. This 1004 series three-piece tap kit has a bright (uncoated) finish. It has right hand direction with a 2 15/16 inch length.
This three-piece tap kit is made of high speed steel and has a ⅜ inch diameter shank. It includes one bottoming tap, one plug tap, one taper tap, and is designed for use with aluminum, brass, bronze, cast iron, copper, steel, and meets the standards for USCTI. This 1004 series three-piece tap kit has a bright (uncoated) finish. It has right hand direction with a 2 15/16 inch length.
This three-piece tap kit is made of high speed steel and has a 3/16 inch diameter shank. It includes one bottoming tap, one plug tap, one taper tap, and is designed for use with aluminum, brass, bronze, cast iron, copper, steel, and meets the standards for USCTI. This 1004 series three-piece tap kit has a bright (uncoated) finish. It has right hand direction with a 2⅜ inch length.
This three-piece tap kit is made of high speed steel and has a 3/16 inch diameter shank. It includes one bottoming tap, one plug tap, one taper tap, and is designed for use with aluminum, brass, bronze, cast iron, copper, steel, and meets the standards for USCTI. This 1004 series three-piece tap kit has a bright (uncoated) finish. It has right hand direction with a 2⅜ inch length.
This three-piece tap kit is made of high speed steel and has a ⅜ inch diameter shank. It includes one bottoming tap, one plug tap, one taper tap, and is designed for use with aluminum, brass, bronze, cast iron, copper, steel, and meets the standards for USCTI. This 1004 series three-piece tap kit has a bright (uncoated) finish. It has right hand direction with a 2 15/16 inch length.
This three-piece tap kit is made of high speed steel and has a ⅜ inch diameter shank. It includes one bottoming tap, one plug tap, one taper tap, and is designed for use with aluminum, brass, bronze, cast iron, copper, steel, and meets the standards for USCTI. This 1004 series three-piece tap kit has a bright (uncoated) finish. It has right hand direction with a 2 15/16 inch length.
This three-piece tap kit is made of high speed steel and has a 23/64 inch diameter shank. It includes one bottoming tap, one plug tap, one taper tap, and is designed for use with aluminum, brass, bronze, cast iron, copper, steel, and meets the standards for USCTI. This 1004 series three-piece tap kit has a bright (uncoated) finish. It has right hand direction with a 3⅜ inch length.
This three-piece tap kit is made of high speed steel and has a 23/64 inch diameter shank. It includes one bottoming tap, one plug tap, one taper tap, and is designed for use with aluminum, brass, bronze, cast iron, copper, steel, and meets the standards for USCTI. This 1004 series three-piece tap kit has a bright (uncoated) finish. It has right hand direction with a 3⅜ inch length.
This hand tap set is 1 7/8 inches long overall, with a 0.141-inch shank diameter and a #4-40 UNC thread. This bright, right hand tap set includes bottoming, plug, and taper taps and is made from high speed steel.
This hand tap set is 1 7/8 inches long overall, with a 0.141-inch shank diameter and a #4-40 UNC thread. This bright, right hand tap set includes bottoming, plug, and taper taps and is made from high speed steel.
This hand tap set is 1 15/16 inches long overall, with a 0.141-inch shank diameter and a #5-44 UNF thread. This bright, right hand tap set includes bottoming, plug, and taper taps and is made from high speed steel.
This hand tap set is 1 15/16 inches long overall, with a 0.141-inch shank diameter and a #5-44 UNF thread. This bright, right hand tap set includes bottoming, plug, and taper taps and is made from high speed steel.
This hand tap set is 1 15/16 inches long overall, with a 0.141-inch shank diameter and a #5-40 UNC thread. This bright, right hand tap set includes bottoming, plug, and taper taps and is made from high speed steel.
This hand tap set is 1 15/16 inches long overall, with a 0.141-inch shank diameter and a #5-40 UNC thread. This bright, right hand tap set includes bottoming, plug, and taper taps and is made from high speed steel.
This three-piece tap kit is made of high speed steel and has a 37/64 inch diameter shank. It includes one bottoming tap, one plug tap, one taper tap, and is designed for use with aluminum, brass, bronze, cast iron, copper, steel, and meets the standards for USCTI. This 1004 series three-piece tap kit has a bright (uncoated) finish. It has right hand direction with a 4¼ inch length.
This three-piece tap kit is made of high speed steel and has a 37/64 inch diameter shank. It includes one bottoming tap, one plug tap, one taper tap, and is designed for use with aluminum, brass, bronze, cast iron, copper, steel, and meets the standards for USCTI. This 1004 series three-piece tap kit has a bright (uncoated) finish. It has right hand direction with a 4¼ inch length.
This three-piece tap kit is made of high speed steel and has a 5/32 inch diameter shank. It includes one bottoming tap, one plug tap, one taper tap, and is designed for use with aluminum, brass, bronze, cast iron, copper, steel, and meets the standards for USCTI. This 1004 series three-piece tap kit has a bright (uncoated) finish. It has right hand direction with a 2⅛ inch length.
This three-piece tap kit is made of high speed steel and has a 5/32 inch diameter shank. It includes one bottoming tap, one plug tap, one taper tap, and is designed for use with aluminum, brass, bronze, cast iron, copper, steel, and meets the standards for USCTI. This 1004 series three-piece tap kit has a bright (uncoated) finish. It has right hand direction with a 2⅛ inch length.
This three-piece tap kit is made of high speed steel and has a ¼ inch diameter shank. It includes one bottoming tap, one plug tap, one taper tap, and is designed for use with aluminum, brass, bronze, cast iron, copper, steel, and meets the standards for USCTI. This 1004 series three-piece tap kit has a bright (uncoated) finish. It has right hand direction with a 2½ inch length.
This three-piece tap kit is made of high speed steel and has a ¼ inch diameter shank. It includes one bottoming tap, one plug tap, one taper tap, and is designed for use with aluminum, brass, bronze, cast iron, copper, steel, and meets the standards for USCTI. This 1004 series three-piece tap kit has a bright (uncoated) finish. It has right hand direction with a 2½ inch length.
This three-piece tap kit is made of high speed steel and has a 7/32 inch diameter shank. It includes one bottoming tap, one plug tap, one taper tap, and is designed for use with aluminum, brass, bronze, cast iron, copper, steel, and meets the standards for USCTI. This 1004 series three-piece tap kit has a bright (uncoated) finish. It has right hand direction with a 2⅜ inch length.
This three-piece tap kit is made of high speed steel and has a 7/32 inch diameter shank. It includes one bottoming tap, one plug tap, one taper tap, and is designed for use with aluminum, brass, bronze, cast iron, copper, steel, and meets the standards for USCTI. This 1004 series three-piece tap kit has a bright (uncoated) finish. It has right hand direction with a 2⅜ inch length.
This three-piece tap kit is made of high speed steel and has a ¼ inch diameter shank. It includes one bottoming tap, one plug tap, one taper tap, and is designed for use with aluminum, brass, bronze, cast iron, copper, steel, and meets the standards for USCTI. This 1004 series three-piece tap kit has a bright (uncoated) finish. It has right hand direction with a 2½ inch length.
This three-piece tap kit is made of high speed steel and has a ¼ inch diameter shank. It includes one bottoming tap, one plug tap, one taper tap, and is designed for use with aluminum, brass, bronze, cast iron, copper, steel, and meets the standards for USCTI. This 1004 series three-piece tap kit has a bright (uncoated) finish. It has right hand direction with a 2½ inch length.
To view Availability for another location, please enter postal code below
Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order.
