Tap & Die Sets

This tap and die set is made of high speed steel, high speed steel. It includes straight handle tap wrench, die stock, a plastic case, ½"-13, ¼"-20, ⅜"-16, 5/16"-18, 7/16"-14, ½"-13, ¼"-20, ⅜"-16, 5/16"-18, 7/16"-14, and is designed for use with alloy steel, austenitic stainless steel, magnetic soft steel, plain carbon steel, and meets ANSI standards. This tap and die set has a bright (uncoated) finish, and has fractional inch measurements.

This tap and die set is made of high speed steel, high speed steel. It includes straight handle tap wrench, die stock, a plastic case, ½"-13, ¼"-20, ⅜"-16, 5/16"-18, 7/16"-14, ½"-13, ¼"-20, ⅜"-16, 5/16"-18, 7/16"-14, and is designed for use with alloy steel, austenitic stainless steel, magnetic soft steel, plain carbon steel, and meets ANSI standards. This tap and die set has a bright (uncoated) finish, and has fractional inch measurements.

This tap and die set is made of carbon steel. It includes straight handle tap wrench, die stock, a plastic case, ¼ in to ½ inch, ½"-13, ¼"-20, ⅜"-16, 5/16"-18, 7/16"-14, and is designed for use with ferrous metal, and meets the standards for ANSI. This tap and die set has a bright (uncoated) finish, and has fractional inch measurements. It has right hand direction.

This tap and die set is made of carbon steel. It includes straight handle tap wrench, die stock, a plastic case, ¼ in to ½ inch, ½"-13, ¼"-20, ⅜"-16, 5/16"-18, 7/16"-14, and is designed for use with ferrous metal, and meets the standards for ANSI. This tap and die set has a bright (uncoated) finish, and has fractional inch measurements. It has right hand direction.

This tap and die set is made of high speed steel, high speed steel. It includes straight handle tap wrench, t-handle tap wrench, die stock, thread gauge, screwdriver, a plastic case, and is designed for use with alloy steel, austenitic stainless steel, magnetic soft steel, plain carbon steel, and meets ANSI standards. This tap and die set has a bright (uncoated) finish, and has fractional inch, wire measurements.

This tap and die set is made of high speed steel, high speed steel. It includes straight handle tap wrench, t-handle tap wrench, die stock, thread gauge, screwdriver, a plastic case, and is designed for use with alloy steel, austenitic stainless steel, magnetic soft steel, plain carbon steel, and meets ANSI standards. This tap and die set has a bright (uncoated) finish, and has fractional inch, wire measurements.

This tap and die set is made of carbon steel. It includes 2 straight tap wrenches, t-handle tap wrench, die stocks, a plastic case, and is designed for use with ferrous metal, and meets the standards for ANSI. This tap and die set has a bright (uncoated) finish, and has fractional inch measurements. It has right hand direction.

This tap and die set is made of carbon steel. It includes 2 straight tap wrenches, t-handle tap wrench, die stocks, a plastic case, and is designed for use with ferrous metal, and meets the standards for ANSI. This tap and die set has a bright (uncoated) finish, and has fractional inch measurements. It has right hand direction.

This tap and die set is made of high speed steel, high speed steel. It includes straight handle tap wrench, die stock, a plastic case, sizes ½"-20, ¼"-28, ¾"-16, ⅜"-24, 5/16"-24, ⅝"-18, 7/16"-20, ½"-20, ¼"-28, ¾"-16, ⅜"-24, 5/16"-24, ⅝"-18, 7/16"-20, and is designed for use with alloy steel, austenitic stainless steel, magnetic soft steel, plain carbon steel, and meets ANSI standards. This tap and die set has a bright (uncoated) finish, and has fractional inch measurements.

This tap and die set is made of high speed steel, high speed steel. It includes straight handle tap wrench, die stock, a plastic case, sizes ½"-20, ¼"-28, ¾"-16, ⅜"-24, 5/16"-24, ⅝"-18, 7/16"-20, ½"-20, ¼"-28, ¾"-16, ⅜"-24, 5/16"-24, ⅝"-18, 7/16"-20, and is designed for use with alloy steel, austenitic stainless steel, magnetic soft steel, plain carbon steel, and meets ANSI standards. This tap and die set has a bright (uncoated) finish, and has fractional inch measurements.

This tap and die set is made of carbon steel. It includes straight handle tap wrench, t-handle tap wrench, die stock, thread gauge, screwdriver, a plastic case, ¼ in to ¾ inch, ½"-13, ¼"-20, ¾"-10, ⅜"-16, 5/16"-18, ⅝"-11, 7/16"-14, 9/16"-12, and is designed for use with ferrous metal, and meets ANSI standards. This tap and die set has a bright (uncoated) finish, and has fractional inch measurements.

This tap and die set is made of carbon steel. It includes straight handle tap wrench, t-handle tap wrench, die stock, thread gauge, screwdriver, a plastic case, ¼ in to ¾ inch, ½"-13, ¼"-20, ¾"-10, ⅜"-16, 5/16"-18, ⅝"-11, 7/16"-14, 9/16"-12, and is designed for use with ferrous metal, and meets ANSI standards. This tap and die set has a bright (uncoated) finish, and has fractional inch measurements.

This tap and die set is made of high speed steel, high speed steel. It includes 2 straight tap wrenches, t-handle tap wrench, die stock, a plastic case, and is designed for use with alloy steel, austenitic stainless steel, magnetic soft steel, plain carbon steel, and meets ANSI standards. This tap and die set has a bright (uncoated) finish, and has fractional inch, wire measurements.

This tap and die set is made of high speed steel, high speed steel. It includes 2 straight tap wrenches, t-handle tap wrench, die stock, a plastic case, and is designed for use with alloy steel, austenitic stainless steel, magnetic soft steel, plain carbon steel, and meets ANSI standards. This tap and die set has a bright (uncoated) finish, and has fractional inch, wire measurements.

This tap and die set is made of carbon steel. It includes straight handle tap wrench, die stock, a plastic case, ¼ in to ¾ inch, ½"-13, ½"-20, ¼"-20, ¼"-28, ¾"-10, ¾"-16, ⅜"-16, ⅜"-24, 5/16"-18, 5/16"-24, ⅝"-11, ⅝"-18, 7/16"-14, 7/16"-20, and is designed for use with ferrous metal, and meets ANSI standards. This tap and die set has a bright (uncoated) finish, and has fractional inch measurements.

This tap and die set is made of carbon steel. It includes straight handle tap wrench, die stock, a plastic case, ¼ in to ¾ inch, ½"-13, ½"-20, ¼"-20, ¼"-28, ¾"-10, ¾"-16, ⅜"-16, ⅜"-24, 5/16"-18, 5/16"-24, ⅝"-11, ⅝"-18, 7/16"-14, 7/16"-20, and is designed for use with ferrous metal, and meets ANSI standards. This tap and die set has a bright (uncoated) finish, and has fractional inch measurements.

This tap and die set is made of carbon steel. It includes straight handle tap wrench, die stock, t-handle tap wrench, thread gauge, screwdriver, a plastic case, #4 to ½ inch, #10-24, #10-32, #12-24, #4-40, #6-32, #8-32, ½"-13, ½"-20, ¼"-20, ¼"-28, ⅛"-27, ⅜"-16, ⅜"-24, 5/16"-18, 5/16"-24, 7/16"-14, 7/16"-20, and is designed for use with ferrous metal, and meets ANSI standards. This tap and die set has a bright (uncoated) finish, and has pipe measurements.

This tap and die set is made of carbon steel. It includes straight handle tap wrench, die stock, t-handle tap wrench, thread gauge, screwdriver, a plastic case, #4 to ½ inch, #10-24, #10-32, #12-24, #4-40, #6-32, #8-32, ½"-13, ½"-20, ¼"-20, ¼"-28, ⅛"-27, ⅜"-16, ⅜"-24, 5/16"-18, 5/16"-24, 7/16"-14, 7/16"-20, and is designed for use with ferrous metal, and meets ANSI standards. This tap and die set has a bright (uncoated) finish, and has pipe measurements.

This tap and die set is made of high speed steel, high speed steel. It includes straight handle tap wrench, die stock, t-handle tap wrench, thread gauge, screwdriver, a plastic case, and is designed for use with alloy steel, austenitic stainless steel, magnetic soft steel, plain carbon steel, and meets ANSI standards. This tap and die set has a bright (uncoated) finish, and has fractional inch measurements.

This tap and die set is made of high speed steel, high speed steel. It includes straight handle tap wrench, die stock, t-handle tap wrench, thread gauge, screwdriver, a plastic case, and is designed for use with alloy steel, austenitic stainless steel, magnetic soft steel, plain carbon steel, and meets ANSI standards. This tap and die set has a bright (uncoated) finish, and has fractional inch measurements.

This tap and die set is made of high speed steel, high speed steel. It includes straight handle tap wrench, t-handle tap wrench, die stock, screwdriver, a plastic case, and is designed for use with alloy steel, austenitic stainless steel, magnetic soft steel, plain carbon steel, and meets ANSI standards. This tap and die set has a bright (uncoated) finish, and has fractional inch measurements.

This tap and die set is made of high speed steel, high speed steel. It includes straight handle tap wrench, t-handle tap wrench, die stock, screwdriver, a plastic case, and is designed for use with alloy steel, austenitic stainless steel, magnetic soft steel, plain carbon steel, and meets ANSI standards. This tap and die set has a bright (uncoated) finish, and has fractional inch measurements.

This tap and die set is made of high speed steel, high speed steel. It includes straight handle tap wrench, die stock, a plastic case, ½"-20, ¼"-28, ⅜"-24, 5/16"-24, 7/16"-20, ½"-20, ¼"-28, ⅜"-24, 5/16"-24, 7/16"-20, and is designed for use with alloy steel, austenitic stainless steel, magnetic soft steel, plain carbon steel, and meets ANSI standards. This tap and die set has a bright (uncoated) finish, and has fractional inch measurements.

This tap and die set is made of high speed steel, high speed steel. It includes straight handle tap wrench, die stock, a plastic case, ½"-20, ¼"-28, ⅜"-24, 5/16"-24, 7/16"-20, ½"-20, ¼"-28, ⅜"-24, 5/16"-24, 7/16"-20, and is designed for use with alloy steel, austenitic stainless steel, magnetic soft steel, plain carbon steel, and meets ANSI standards. This tap and die set has a bright (uncoated) finish, and has fractional inch measurements.

This tap and die set is made of carbon steel. It includes straight handle tap wrench, die stock, a plastic case, ¼ in to ¾ inch, ½"-13, ¼"-20, ¾"-10, ⅜"-16, 5/16"-18, ⅝"-11, 7/16"-14, and is designed for use with ferrous metal, and meets the standards for ANSI. This tap and die set has a bright (uncoated) finish, and has fractional inch measurements.

This tap and die set is made of carbon steel. It includes straight handle tap wrench, die stock, a plastic case, ¼ in to ¾ inch, ½"-13, ¼"-20, ¾"-10, ⅜"-16, 5/16"-18, ⅝"-11, 7/16"-14, and is designed for use with ferrous metal, and meets the standards for ANSI. This tap and die set has a bright (uncoated) finish, and has fractional inch measurements.

This tap and die set is made of high speed steel, high speed steel. It includes straight handle tap wrench, die stock, a plastic case, is designed for use with alloy steel, austenitic stainless steel, magnetic soft steel, plain carbon steel, and meets ANSI standards. This tap and die set has a bright (uncoated) finish, and has fractional inch measurements. It has right hand direction.

This tap and die set is made of high speed steel, high speed steel. It includes straight handle tap wrench, die stock, a plastic case, is designed for use with alloy steel, austenitic stainless steel, magnetic soft steel, plain carbon steel, and meets ANSI standards. This tap and die set has a bright (uncoated) finish, and has fractional inch measurements. It has right hand direction.

NC, NF & NPT thread types. 1-1/2 in and 2 in OD adjustable dies (WSW1PZ53), 1-1/2 in and 2 in OD solid dies (WSW1PZ37).6 Machine Screw hand taps from 4-40 to 12-24. 10 UNC Tap and Dies: 1/4 in -20 to 1 in-8. 10 UNF Tap and Dies: 1/4 in-28 to 1 in -14.2 NPT Tap & Dies: 1/8 in -27, 1/4 in-18. 2 straight tap wrenches, T-Handle tap wrench, screw pitch gauge, screwdriver and 1 in, 1-1/2 in and 2 in die stocks.

NC, NF & NPT thread types. 1-1/2 in and 2 in OD adjustable dies (WSW1PZ53), 1-1/2 in and 2 in OD solid dies (WSW1PZ37).6 Machine Screw hand taps from 4-40 to 12-24. 10 UNC Tap and Dies: 1/4 in -20 to 1 in-8. 10 UNF Tap and Dies: 1/4 in-28 to 1 in -14.2 NPT Tap & Dies: 1/8 in -27, 1/4 in-18. 2 straight tap wrenches, T-Handle tap wrench, screw pitch gauge, screwdriver and 1 in, 1-1/2 in and 2 in die stocks.

This tap and die set is made of carbon steel. It includes straight handle tap wrench, die stock, a plastic case, ¼ in to ½ inch, ½"-13, ½"-20, ¼"-20, ¼"-28, ⅜"-16, ⅜"-24, 5/16"-18, 5/16"-24, 7/16"-14, 7/16"-20, and is designed for use with ferrous metal, and meets ANSI standards. This tap and die set has a bright (uncoated) finish, and has fractional inch measurements.

This tap and die set is made of carbon steel. It includes straight handle tap wrench, die stock, a plastic case, ¼ in to ½ inch, ½"-13, ½"-20, ¼"-20, ¼"-28, ⅜"-16, ⅜"-24, 5/16"-18, 5/16"-24, 7/16"-14, 7/16"-20, and is designed for use with ferrous metal, and meets ANSI standards. This tap and die set has a bright (uncoated) finish, and has fractional inch measurements.